Conditions for appearance of a droplet structure and liquid film on a horizontal heated wall surface for selected liquids

• Autorzy: Zapałowicz Z.
• Języki publikacji: EN

Abstrakty

EN

The paper presents preliminary conclusions on experimental research carried out by author for conditions present during formation of liquid structures appear on a horizontal, heated surface of a metal wall. Research was carried out in the range of parameters where the droplets wet the wall surface. Water, aniline and toluene were investigated. Results were presented in the form of two- and three-dimensional relations, with regard to the change of the maximal value of the wetting coefficient in the function of characteristic parameters describing the development of the phenomenon.

Słowa kluczowe

EN

droplet stream; liquid structure; wall surface wetting

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2000
• Tom: Vol. 21, nr 1-2
• Strony: 73--85
• Opis fizyczny: Bibliogr. 22 poz., rys.

Twórcy

autor

Zapałowicz Z.

• Technical University of Szczecin, Faculty of Mechanical Engineering, Department of Heat Engineering, al. Piastów 19, 70-310, Poland,

Bibliografia

• [1] BERNARDIN J. D., STEBBINS C. J., MUDAWAR I.: Mapping of impact and heat transfer regimes of water drops impinging on a polished surface, Int. J. Heat Mass Transfer, 40(1997), No. 2, 247-267.
• [2] BONACINA C., DEL GIUDICE, S., COMINI G.: Dropwise evaporation, Trans. of ASME, J. Heat Transfer, 101(1979), 441-446.
• [3] CHANDRA S., AVEDISIAN C. T.: On the collision of a droplet with a solid surface, Proc. Royal Society of London A, 432(1991), 13-41.
• [4] DEB S., YAO S.: Analysis on film boiling heat transfer of impacting sprays, Int. J. Heat Mass Transfer, 32(1989), 2099-2112.
• [5] FUKAI J., SHIIBA Y., MIYATAKE 0.: Theoretical study of droplet impingement on a solid surface below the Leidenfrost temperature, Int. J. Heat Mass Transfer, 40(1997), No. 10, 2490-2492.
• [6] HEALY W. M., HARTLEY J. G., ABDEL-KHALIK S. 1.: Comparison between theore- tical models and experimental data for spreading of liquid droplets impacting a solid surface, Int. J. Heat Mass Transfer, 39(1996), No. 14, 3079-3082.
• [7] LIU L., YAO S.: Heat transfer analysis of droplet flow impinging on a hot surface, Proc. 7th Int. Heat Transfer Conference, 4(1982), PB25, 161-166.
• [8] MADEJSKI J.: A new criterion of dry-out in two-phase flow, Int. J. Heat Mass Trans- fer, 24(1981), 1657-1665.
• [9] SEKI M., KAWAMURA H., SANAKAWA K.: Transient temperature profle of a hot wall due to an impinging liquid droplet, Trans. of ASME, J. Heat Transfer, 100(1978), No. 1, 167-169.
• [10] SENDA J., KOBAYASHI M., IWASHITA S., FUJIMOTO H.: modeling of diesel spray impinging on flat wall, JSME Int. J., Ser. B, 39(1996), 859-865.
• [11] TIO K. K., SADHAL S. S.: Dropwise evaporation: Thermal analysis of multidrop systems, Int. J. Heat Mass Transfer, 35(1992), 1987-2004.
• [12] TIO K.-K., SADHAL S.S.: Thermal analysis of droplet spray evaporation from a heated solid surface, Trans. of ASME, J. Heat Transfer, 114(1992), No. 1, 220-226.
• [13] WALDVOGEL J. M., POULIKAKOS D., WALLACE D. B., MARUSAK R.: Transport phenomena in picoliter size solder droplet dispension, Trans. ASME, J. Heat Trans- fer, 118(1996), 148-156.
• [14] WANG CH. H., SUN CH. J, KUO H. CH.: An experimental investigation of heat transfer of a droplet impinging upon a hot surface, Int. Comm. Heat Mass Transfer, 24(1997), 65-78.
• [15] ZAPAŁOWICZ Z.: The effect of droplet volume on the droplet spreading ratio, Transactions of the Inst. of Fluid-Flow Machinery, 96(1994), 3-13.
• [16] ZAPAŁOWICZ Z.: Einfluss der Flüssigkeitsart und Fallgeschwindigkeit terialen, V Int. Symp. Warmeaustausch und Regenerative Energiequellen, Szczecin auf den Benetzbarkeitskoeffzientten auf waagerechter Wandoberfläche, Tagungsma- 1994, 307-316.
• [17] ZAPAŁOWICZ Z.: Spreading ratio for water droplets, Proc. 2nd Baltic Heat Transfer Conference, Jurmala, Riga, Litvia, Advances in Engineering Heat Transfer, Compu- tational Mechanics Publications, Southampton, Boston, 1995, 617-626.
• [18] ZAPAŁOWICZ Z.: Interaction between a single water droplet and a flat, horizontal, hot Gdańsk, November 18-21, 1997, 593-600. surface, Proc. IMP'97 Conference on Modelling and Design in Fluid-Flow Machinery,
• [19] ZAPAŁOWICZ Z.: Experimental research on spreading of two water droplets on a horizontal, heated surface, Proc. of the X Symposium of Heat and Mass Transfer, Świeradów Zdrój, September, 14-18, 1998, Bulletin of Heat Technology & Fluid Mechanics Institute, Technical University of Wrocław, No. 53, Series: Conferences, No. 9, Part II, 892-899.
• [20] ZAPAŁOWICZ Z.: Spreading of two simultaneously dropped water droplets on a hori- zontal, heated wall surface, Proc. of the 2nd International Symposium on Two-Phase Flow Modelling and Experimentation, Piza 1999, 1529-1536.
• [21] ZAPAŁOWICZ Z.: Conditions for appearance of droplet structure for aniline, Proc. of the 2nd International Conference: Heat Transfer and Transport Phenomena in Multiphase Systems, Kielce 1999, 349-358.
• [22] ZAPAŁOWICZ Z.: Experimental investigations of spreading of two toluene droplets simultaneously dropped on a horizontal, heated surface, Proc. of the XVII Meeting of Thermodynamicists, Zakopane 1999, 1625-1636 (in Polish).