Influence of fouling and inert gases on the performance of regenerative feedwater heaters

• Autorzy: Butrymowicz D. , Trela M.
• Języki publikacji: EN

Abstrakty

EN

The paper is devoted to the performance estimation of a recuperative heat exchanger under conditions of fouling and presence of inert gases. Calculations were performed using three different approaches based on: the global, lumped-parameter and 1D models. With the use of 1D model the influence of fouling and air-concentration on the distribution of both the pertinent heater temperatures and heat flux were investigated. It appeared that air plays a dominant role in the case when its concentration is sufficiently high. It may be concluded that the proposed 1D model provides a very efficient method for heat transfer evaluation of heat exchangers.

Słowa kluczowe

EN

condensation; fouling; heat exchangers; inert gases

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2002
• Tom: Vol. 23, no 1-2
• Strony: 127--140
• Opis fizyczny: Bibliogr. 11 poz.,

Twórcy

autor

Butrymowicz D.

• Instytut Maszyn Przepływowych Polskiej Akademii Nauk w Gdańsku

autor

Trela M.

• Instytut Maszyn Przepływowych Polskiej Akademii Nauk w Gdańsku

Bibliografia

• [1] NOWAK W.: Theory of recuperative heat exchangers, Publishers of the Technical University of Szczecin, Szczecin 1993 (in Polish).
• [2] ZALESKI T.: Mathematical models of heat exchangers, Publ. of the Institute of Chemical Engineering of PASci., Gliwice 1995 (in Polish).
• [3] BUTRYMOWICZ D., TRELA M.: Modelling of heat transfer in recuperative heat ex- changers during steam condensation, Report of the IFFM of PASci., No. 458/96, Gdańsk 1996 (in Polish).
• [4] Code on Steam Condensing Apparatus ANSI/ASME PTC 12.2, The American So- ciety of Mechanical Engineers, United Eng. Centre, New York 1983.
• [5] KURPISZ L., JANKOWSKI Z.: Mathematical modelling of feed-water heaters, Arch. mof Energetics, No. 3(1974), 173-189 (in Polish).
• [6] BERMAN L.D., FUKS S.N.: Calculation of recuperative feed-water heaters for steam condensation from air-steam mixture, Teploenergetika, No. 7(1959), 74-83 (in Rus- sian).
• [7] HONDA H., NOzu S., UCHIMA B., FUJII T.: Effect of vapour velocity on film condensation of R-113 on horizontal tubes in a cross flow, Int. J. of Heat and Mass Transfer, Vol. 29(1986), No. 3, 429-438.
• [8] MARTO P.J.: Heat transfer and two-phase flow during shell-side condensation, Heat Transfer Engi., Vol. 5(1984), No. 1-2, 31-60.
• [9] SZKLOVER G.G.: On calculation of heat transfer in condensers of steam turbines, Teploenergetika, No. 1(1975), 67-71 (in Russian).
• [10] ZHANG C.: Local and overall condensation heat transfer behaviour in horizontal tube bundles, Heat Transfer Engineering, Vol. 17(1996), No. 1, 19-30.
• [11] BUTRYMOWICZ D., GARDZILEWICZ A.: Analysis of measurement of fouling thermal resistances of heat exchangers, Report of the IFFM of PASci., No. 281/96, Gdańsk 1996, (in Polish).