PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Nanokompozyty poli(chlorek winylu)/nanoglinka - właściwości mechaniczne i elektryczne
Języki publikacji
EN
Abstrakty
EN
Poly (vinyl chloride) (PVC) and dioctyl phthalate (DOP) plasticizer were mixed with small amounts (1-10phr) of a layered silicate nanoclay consisting of 83.3% of montmorillonite and 16.7% of kaolinite to obtain PVC-based nanocomposites. The thermalstability of obtained products was characterized by thermal analysis using a thermogravimetric analyzer (TGA). The electrical conductivity of these composites was studied as a function of temperature and it was found that the activation energy for this property is lower than that of the host polymer. The composites exhibit increased Young's modulus and decreased Shore A hardness.
PL
Otrzymano nanokompozyty plastyfikowany poli(chlorek winylu)/nanoglinka (83,3% montmorylonitu + 16,7% kaolinitu) różniące się zawartością napełniacza (1-10phr w przeliczeniu na PVC, tabela 1). Metodą TGA zbadano stabilność termiczną uzyskanych produktów, które do temp. 100°C nie wykazują ubytku masy (rys. 1-3). Scharakteryzowano też ich właściwości dielektryczne (rys. 4 i 5) oraz zależność przewodności właściwej od zawartości nanoglinki i od temperatury (rys. 6-8, tabela 3). Na podstawie tej drugiej zależności obliczano energię aktywacji przewodnictwa nanokompozytów (tabela 3) stwierdzając, że są one pod tym względem zbliżone do półprzewodników. Zbadano też właściwości mechaniczne przy rozciąganiu oraz twardość omawianych produktów (tabela 4).
Czasopismo
Rocznik
Strony
8--14
Opis fizyczny
Bibliogr. 26 poz.
Twórcy
autor
autor
  • Egyptian Petroleum Research Institute, Petrochemical Department, Nasr City, Cairo, Egypt
Bibliografia
  • 1. Fukushima Y, Inagaki S.: /. Ind. Phenom. 1987, 5,473 l
  • 2. Okada A., Kawasumi M., Kurauchi T., Kamigaito O.: Polym. Prep. 1987,28,447.
  • 3. Boucard S., Duchet J., Gerard J. E, Prele R, Gonzale? S.: Macromol. Symp. 2002,194 (1), 241.
  • 4. Alexandre M., Dubois R: Mat. Sci. Eng. 2000, 28,1.
  • 5. Pinnavaia T. J., Beall G. W.: "Polymer-Clay Nancom posites", John Wiley and Sons, 2000.
  • 6. Galeski A., Piorkowska E.: Polimery 2007, 52, 323.
  • 7. Olejniczak S., Kaźmierski S., Pallathadka P. K., Potrzebowski M. J.: Polimery 2007, 52, 713.
  • 8. Bharadwaj R. K.: Macromolecules 2001, 34, 9189.
  • 9. Beyer G.: Fire Mat. 2001, 25,193.
  • 10. Berlund L.: Filler Mdii. Piast. 2000, 4, 31.
  • 11. Jeziórska R., Klepka T., Paukszta D.: Polimery 2007, 52, 294.
  • 12. Zhang Y. H., Gong K. C.: Mat. Res. Soc. 1998, 520,191,
  • 13. Leykin A., Ioelovich M., Figovsky O.: Eurofillers 2003 International Conference, Alicante (SPAIN) September 8-11 (2003), P363.
  • 14. Dong X., Zhou G., Zhang J.: Fangzhi Xuebao 2004, 25 (4), 16.
  • 15. Saad A. L. G., Hassan A. M., Gad E. A. M.: /. Appl Polym. Sci. 1993, 49,1725.
  • 16. Saad A. L. G., Hassan A. M., Youssif M. A., Ahmed M. G. M.; /. Appl Polym. Sci. 1997, 65, 27.
  • 17. Saad A. L. G., Hussien L. L, Ahmed M. G. M., Hassan A. M.: /. Appl Polym. Sci. 1998, 69, 685.
  • 18. Saad A. L. G., Sayed W. M., Ahmed M. G. M., Hassan A. M.: /. Appl Polym. Sci. 1999, 73, 2657.
  • 19. Saad A. L. G., Aziz H. A., Dimitry O. I. H.: /. Appl Polym. Sci. 2003, 91,1590.
  • 20. Davies J. M., Miller R. F, Busse W. F: /. Am. Chem. Soc. 1941, 63, 361.
  • 21. Sasabe H., Saito S. J.: /. Polym. Sci., Part A: Polym. Chem. 1969, 7,1405.
  • 22. Hanna F. F, Yehia A. A., Abu Bakr A.: Br. Polym. ]. 1973, 5, 83.
  • 23. Goodings E. R: Chem. Soc. Revs. 1976, 5, 95.
  • 24. Kemeny G., Mahanti S. D.: Proc. Nat. Acad. Sci. USA 1975, 72,999.
  • 25. Pochtennyi A. E., Ratnikov E. V.: Dokl. Akad. Nauk BSSR 1981, 25, 896.
  • 26. Eley D. D., Partfitt G. D.: Trans. Faraday Soc. 1955, 51, 1529.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT7-0014-0031
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.