Sensorless Control of Surface Mounted Permanent Magnet Synchronous Motors Using Matrix Converters

• Autorzy: Saltiveri D. , Arias A. , Asher G. , Sumner M. , Wheeler P. , Empringham L. , Silva C.
• Języki publikacji: EN

Abstrakty

EN

This paper investigates the influence of the power converter on the performance of Surface Mounted Permanent Magnet Synchronous Motor drives, which employ High Frequency voltage injection to achieve low and zero speed control. Experimental results demonstrate the remarkable performance of the sensor less speed and position control employing the Matrix Converter and the contributions of the Space Modulation Profiling technique. The Matrix Converter has almost zero dead time, which means that behaves almost like an ideal power converter and achieves better results than the conventional Voltage Source Inverter. A comparison of the sensor less technique proposed using both converters is made.

Słowa kluczowe

EN

sensorless control; permanent magnet synchronous motor; matrix converters

• Wydawca: AGH University of Science and Technology ; Lodz University of Technology
• Czasopismo: Electrical Power Quality and Utilisation. Journal
• Rocznik: 2006
• Tom: Vol. 12, nr 1
• Strony: 59--67
• Opis fizyczny: Bibliogr. 18 poz.

Twórcy

autor

Saltiveri D.

autor

Arias A.

autor

Asher G.

autor

Sumner M.

autor

Wheeler P.

autor

Empringham L.

autor

Silva C.

• Technical University of Catalonia, Spain

Bibliografia

• 1. Wu R. and Slemon G.: A permanent magnet motor drive without a shaft sensor. IEEE Trans. Ind. Applicat., vol. 27 no. 5, pp. 1005-1011, Sept./Oct. 1991.
• 2. Andreescu G.D.: Position and speed sensorless control of PMSM drives based on adaptive observer. In Proc. EPE.99, 1999.
• 3. Dhaouadi R., Mohan N., and Norum L.: Design and implementation of an extended Kalman filter for the state estimation of a permanent magnet synchronous motor. IEEE Trans. Power Electron., vol. 6, pp. 491.497, Sept./Oct. 1994.
• 4. Jansen P. L . and Lorenz R.D.: Transducerless position and velocity estimation in induction and salient AC machines. IEEE Trans. Ind. Applicat., vol. 31 no. 2, pp. 240.247, Mar./Apr. 1995.
• 5. Blaschke F., vander Burgt J. and Vandenput A.: Sensorless direct field orientation at zero flux frequency. In Proc.IEEE Ind. Applicat. Soc. Annual Meeting, pp. 189.196, Oct. 1996.
• 6. Schroedl M.: Sensorless control of AC machines at low speed and standstill based on the INFORM method. In Proc. IEEE Ind. Applicat. Soc. Annual Meeting, pp. 270.277, Oct. 1996.
• 7. Ha J-I. and Sul S-K.: Sensorless filed orientation control of an induction machine by high frequency signal injection. In Proc. IEEE Ind. Applicat. Soc. Annual Meeting, pp. 426.432, Oct. 1997.
• 8. Corley M.J. and Lorenz R.D.: Rotor position and velocity estimation for a salient-plot permanent magnet synchronous machine at standstill and high speeds. IEEE Trans. Ind. Applicat., vol. 34 no. 4, pp. 784.789, Jul./Aug. 1998.
• 9. Kang S-J., Ha J-I. and Sul S-K.: Position controlled synchronous reluctance motor without rotational transducer. IEEE Trans. Ind. Applicat., vol. 35 no. 6, pp. 1393.1398, Nov./ Dec. 1999.
• 10. Kasa N. and Watanabe H.: A mechanical sensorless control system for salient-pole brushless dc motor with autocalibration of estimated position angles. IEEE Trans. Ind. Electron., vol. 47 no. 2, pp. 389.395, Apr. 2000.
• 11. Jang J-H., Ha J-I. and Sul S-K.: Vector control of surface mounted permanent magnet motor without any rotational transducer. Proc. IEEE Applied Power Electronics Conference and Exposition (APEC), pp. 845.849, Mar. 2001.
• 12. Silva C., Asher G. and Sumner M.: An HF Signal-Injection Based Observer for a Wide Speed Range Sensorless PM Motor Drives Including Zero Speed. European Power Electronics Conference, EPE Toulouse 2003.
• 13. Choi J. and Sul S.: A New Compensation Strategy Reducing Voltage/Current Distortion in PWM VSI Systems Operating with Low Output Voltages. IEEE Trans. Ind. Applicat., vol. 31 no. 5, pp 1001.1008, Sept./Oct. 1995.
• 14. Holtz J. and Quan J.: Sensorless vector control of induction motors at very low speed using a nonlinear inverter model and parameter identification. IEEE Trans. Ind. Applicat., vol. 38 no. 4, pp. 1087.1095, Jul./Aug. 2002.
• 15. Filka R. , Asher G., Wheeler P. and Silva C.: Analysis of the Influence of Converter Non-linearities on Performance of Sensorless Controlled Synchronous PM Machine Algorithms. European Power Electronics Conference, EPE Toulouse 2003.
• 16. Bland M., Silva C., Wheeler P. and Empringham L.: Minimisation of Commutation Delays in Power Converters. European Power Electronics Conference, EPE Toulouse 2003.
• 17. Wheeler P., Rodriguez J., Clare J., Empringham L. and Weinstein A. : Matrix converters: a technology review. IEEE Trans. Ind. Electron, pp. 276.288, vol. 49 no. 2, Apr. 2002.
• 18. Teske N., Asher G., Sumner M. and BradleyK.: Encoderless Position Control of Induction Machines. European Power Electronics Conference, EPE Graz 2001.