An approximate economically optimal inspection interval for production processes with finite run length

• Autorzy: Deeb A. M. , Hryniewicz O.
• Języki publikacji: EN

Abstrakty

EN

Increased competition on the global market forces producers to follow policies leading to finite production runs. This situation requires implementation of a new type of inspection procedures with the aim to improve or sustain production quality levels. One of the most important aspects in the design of inspection processes is the specification of inspection intervals. This paper provides a simple procedure to determine an approximate optimal inspection interval h for a given inspection plan, characterized by its probability of type-I error a and probability of type-II error β, for processes with finite run length.

Słowa kluczowe

EN

inspection plan; inspection interval; just-in-time production; finite run length

• Wydawca: Systems Research Institute, Polish Academy of Sciences
• Czasopismo: Control and Cybernetics
• Rocznik: 2008
• Tom: Vol. 37, no 1
• Strony: 191--204
• Opis fizyczny: Bibliogr. 28 poz.

Twórcy

autor

Deeb A. M.

autor

Hryniewicz O.

• Department of Statistics, Al-fatih University Tripoli, Libya

Bibliografia

• BATHER, J.A. (1963) Control charts and the minimization of costs. Journ. of the Roy. Stat. Soc., Ser. B 25, 49-80.
• BLACKWELL, M.T.R. (1977) The effect of short production runs on CSP-1. Technometrics 19 (3), 259-263.
• CHIU, W.K. and WETHERILL. G.B. (1974) A simplified scheme for the economic design of X-charts. Journal of Quality Technology 6 (2), 63-69.
• VON COLLANI, E. (1986) A simple procedure to determine the economic design of an X control chart. Journal of Quality Technology 18 (3), 145-151.
• VON COLLANI, E. (1989) The Economic Design of Control Charts. E.G. Teubner Stuttgart.
• COX, D.R. (1962) Renewal Theory. John Wiley, New York.
• CROWDER, S.V. (1992) An SPC model for short production runs: minimizing expected cost. Technometrics 34 (1), 63-73.
• DEEB, A.M. and HRYNIEWICZ, O. (2004) An approximate optimal economic inspection interval for a process with finite production runs. Research Report, Systems Research Institute, Polish Academy of Sciences, Warszawa.
• DEL CASTILLO, E. and MONTGOMERY, D.C. (1992) Optimal Design of Control Charts of Finite Length Production Runs. Technical paper, Publication No. 92-10. Arizona State University.
• DEL CASTILLO, E. and MONTGOMERY, D.C. (1995) A Kalman filtering process control with an application in semiconductor short run manufacturing. Quality and Reliability Engineering International 11, 101-105.
• DEL CASTILLO, E. and MONTGOMERY, D.C. (1996) A general model for the optimal economic design of X-charts used to control short or long run processes. IEE Transactions 28, 193-201.
• DEL CASTILLO, E., GRAYSON, J., RUNGER, G. and MONTGOMERY, D.C. (1996) A review of the SPC methods for short runs. Communications in Statistics, Theory and Methods, 25, 11, 272_3-2737.
• DUNCAN, A.J. (1956) The economic design of X-charts used to maintain current control of a process. Journ. of the Amer. Stat. Assoc. 51, 228-242.
• DUNCAN, A.J. (1978) The economic design of p-chart to maintain current control of a process: Some numerical results. Technometrics 20, 3, 235-243.
• GIBRA, I.N. (1970) Economically optimal determination of the parameters of X-control chart. Management Science 17, 9, 635-646.
• HO, CHUANCHING and CASE K.E. (1994) Economic design of control charts: A literature review for 1981-1991. Journal of Quality Technology 26, 1, 39-53.
• HRYNIEWICZ, O. (1992) Approximately Optimal Economic Process Control for a General Class of Control Procedures. Frontiers in Statistical Quality Control IV, 201-215.
• HRYNIEWICZ, O. (1996) Optimal procedures of statistical process control in the presence of erroneous process inspections. Control and Cybernetics 26, 6,1217-1231.
• KEATS, J.B., CASTILLO, E.D., VON COLLANI, E. and SANIGA, E.M. (1997) Economic modeling for statistical process control. Journal of Quality Technology 29, 2, 144-162.
• LADANY, S.P. (1973) Optimal use of control charts for controlling current production. Management Science 19, 7, 763-772.
• LORENZEN, T.J. and VANCE, L.C. (1986) The economic design of control charts A unified approach. Technometrics 28, 1, 3-10.
• MONTGOMERY, D.C., HEIKES, R.G. and MANGE, J.F. (1975) Economic design of fraction defective control charts. Management Science 21. 11, 1272-1283.
• MONTGOMERY, D.C. (1980) The economic design of control charts: A review and literature survey. Journal of Quality Technology 12, 2, 75-87.
• MONTGOMERY, D.C. (1982) Economic design of an X control chart. Journal of Quality Technology 14, 1, 40-43.
• PANAGOS, M.R., HEIKES , R.G. and MONTGOMERY , D.C. (1985) Economic design of X control charts for two manufacturing process models. Naval Research Logistic Quarterly 32, 631-646.
• QUESENBERRY, C.P. (1991) SPC Q charts for start-up processes and short or long runs. Journal of Quality Technology 23, 3, 213-224.
• SANIGA, E.M. (1989) Economic statistical control charts designs with an application to X and R charts. Technometrics 31, 3, 313-320.
• YANG, G.L. (1983) A renewal process approach to continuous sampling plans. Technometrics 25, 1, 59-67.