Compliance minimization of thin plates made of material with predefined Kelvin moduli. Part II. The effective boundary value problem and exemplary solutions

• Autorzy: Dzierżanowski G. , Lewiński T.
• Języki publikacji: EN

Abstrakty

EN

The compliance minimization of transversely homogeneous plates with predefined Kelvin moduli leads to the equilibrium problem of an effective hyperelastic plate with the hyperelastic potential expressed explicitly in terms of both the membrane and bending strain measures, as derived in Part I of the present paper. The aim of this second part of the paper is to show convexity of this potential and, consequently, uniqueness of solutions of the minimum compliance problem considered. Theoretical results are illustrated by numerically calculated optimal trajectories of the eigenstate corresponding to the largest Kelvin modulus.

Słowa kluczowe

EN

free material optimization; compliance minimization; anisotropic plates

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Archives of Mechanics
• Rocznik: 2012
• Tom: Vol. 64, nr 2
• Strony: 137--137
• Opis fizyczny: –-152, Bibliogr. 8 poz.

Twórcy

autor

Dzierżanowski G.

autor

Lewiński T.

Bibliografia

• 1. A. Blinowski, J. Ostrowska-Maciejewska, J. Rychlewski, Two-dimensional Hooke’s tensors-isotropic decomposition, effective symmetry criteria, Arch. Mech., 48, 325–345, 1996.
• 2. S. Czarnecki, T. Lewiński, The stiffest designs of elastic plates. Vector optimization for two loading conditions, Comp. Meth. Appl. Mech. Engrg., 200, 1708–1728, 2011.
• 3. G. Dzierżanowski, T. Lewiński, Compliance minimization of thin plates made of material with predefined Kelvin moduli. Part I. Solving the local optimization problem, Arch. Mech., 64, 21–40, 2012.
• 4. I. Ekeland, R. Temam, Convex Analysis and Variational Problems, North Holland, Amsterdam, 1976.
• 5. G.J. Minty, On the monotonicity of the gradient of a convex function, Pac. J. Math., 14, 243–247, 1964.
• 6. P.M. Naghdi, Foundations of elastic shell theory, [in:] Progress in Solid Mechanics vol. IV, I.N. Sneddon, R. Hill (Eds.), North-Holland, Amsterdam, 1963.
• 7. R.T. Rockafellar, Convex Analysis, Princeton University Press, Princeton, 1970.
• 8. J. Rychlewski, On Hooke’s Law, Prikl. Mat. Mech., 48, 420–435, 1984 [in Russian].