PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
Tytuł artykułu

Temperature influence on volatile compounds emitted during thermo-oxidative degradation of poly(trimethylene terephthalate)

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Wpływ temperatury na skład i ilość lotnych związków emitowanych podczas rozkładu termooksydacyjnego poli(tereftalanu trimetylenu)
Języki publikacji
EN
Abstrakty
EN
The emission of volatile compounds formed during thermo-oxidative degradation of poly(trimethylene terephthalate) (PTT) was studied under isothermal conditions. The experiments were performed in a tubular furnace with a 0.025 m3/h air flow, at the temperatures of 200, 300, 400, 500, 600 and 700 °C. The weight loss of PTT and the amount of the solid degradation products were determined by gravimetric analysis. The volatile compounds were identified and quantified using gas chromatography and colorimetry methods. Analyses showed that the emitted volatiles are complex mixtures which consist of carbon oxides, aliphatic and aromatic hydrocarbons, aldehydes (including acrolein) and allyl alcohol. The temperature influence on the emission and composition of the volatile compounds evolved from PTT was discussed.
PL
Poli(tereftalan trimetylenu) (PTT) poddano termooksydacyjnemu rozkładowi w warunkach izotermicznych, w piecu rurowym (rys. 1) w temperaturze 200, 300, 400, 500, 600 lub 700 °C, przy przepływie powietrza 0,025 m3/h. Za pomocą analizy wagowej określano ubytki masy PTT (rys. 2) oraz ilość emitowanych stałych produktów rozkładu. Lotne związki analizowano jakościowo oraz ilościowo metodami chromatografii gazowej i kolorymetrii. Wykazano, że emitowane lotne produkty rozkładu PTT są złożonymi mieszaninami, składającymi się z tlenków węgla, węglowodorów alifatycznych i aromatycznych, aldehydów (włączając akroleinę) oraz alkoholu allilowego. Omówiono wpływ temperatury procesu na emisję i skład wydzielających się z PTT produktów rozkładu (rys. 3—6).
Czasopismo
Rocznik
Strony
106--110
Opis fizyczny
Bibliogr. 19 poz.
Twórcy
  • West Pomeranian University of Technology, Institute of Organic Chemical Technology, Al. Piastów 42, 71-065 Szczecin, Poland, dziemal@zut.edu.pl
Bibliografia
  • 1. Schultz J. M., Wu J. in: "Handbook of Thermoplastic Polyesters", Wiley, Weinheim 2002, Chap.12, p. 551--578.
  • 2. Chuah H. H.: Chem. Fiber Int. 1996, 46, 424.
  • 3. Pyda M., Boller A., Grebowicz J., Chuah H., Lebedev B. V., Wunderlich B.: J. Polym. Sci., Part B: Polym. Phys. 1998, 36, 2499.
  • 4. Chung W.-T., Yeh W.-J., Hong P.-D.: J. Appl. Polym. Sci. 2002, 83, 2426.
  • 5. Ramiro J., Eguiazábal J. I., Nazabál J.: J. Appl. Polym. Sci. 2002, 86, 2775.
  • 6. Wu G., Li H., Wu Y., Cuculo J. A.: Polymer 2002, 43, 4915.
  • 7. Zhang J.: J. Appl. Polym. Sci. 2004, 91, 1657.
  • 8. Srimoaon P., Dangseeyun N., Supaphol P.: Eur. Polym. J. 2004, 40, 599.
  • 9. Chen K., Shen J., Tang X.: J. Appl. Polym. Sci. 2005, 97, 705.
  • 10. Wang X.-S., Li X.-G., Yan D.: Polym. Test. 2001, 20, 491.
  • 11. Wang X.-S., Li X.-G., Yan D.: J. Appl. Polym. Sci. 2002, 84, 1600.
  • 12. Kelsey D. R., Kiibler K. S., Tutunjian P. N.: Polymer 2005, 46, 8937.
  • 13. Al-Mulla A., Shaban H. I.: Int. J. Polym. Mater. 2008, 57, 275.
  • 14. Liu J., Bian S. G., Xiao M., Wang S. J., Meng Y. Z.: Chinese Chem. Lett. 2009, 20, 487.
  • 15. Wang X.-S., Li X.-G., Yan D.: Polym. Degrad. Stab. 2000, 69, 361.
  • 16. Fairgrieve S. F.: "Degradation and Stabilisation of Aromatic Polyesters", Smithers Rapra Technology, 2009.
  • 17. Stec A., Hull R.: "Fire Toxicity and its Assessment" in: "Fire Retardancy of Polymeric Materials" (Ed. Wilkie C. A., Morgan A. B.), CRC Press Boca Raton 2009, Chap.17, p. 453--477.
  • 18. Dzięcioł M., Trzeszczyński J.: J. Appl. Polym. Sci. 1998, 69, 2377.
  • 19. Dzięcioł M.: Int. J. Environ. Anal. Chem. 2009, 89, 881.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT4-0009-0047
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.