Energy-based limit conditions for transversally isotropic solids

• Autorzy: Kowalczyk K. , Ostrowska-Maciejewska J.
• Języki publikacji: EN

Abstrakty

EN

Using an example of transversal isotropy, the limit condition having an energy interpretation for anisotropic bodies proposed by J. Rychlewski [11] has been illustrated. Transversal isotropy is characterized by the highest degree of symmetry, for which the spherical tensor is not any more the eigenstate of the compliance tensor C. In the case when the spectral decomposition of the compliance tensor C is taken as a main energy-orthogonal decomposition, the limit condition representing a generalization of the Maxwell-Huber-Mises condition is obtained. For a prescribed form of the limit tensor H, the Mises condition is presented in the form of a sum of elastic energies corresponding to uniquely defined energy-orthogonal parts of stress with certain weights, representing the limiting values of those energies. The effect of Burzyński's condition on the form of anisotropy and on the limit condition is discussed. Experimental tests are proposed which could be useful in determining the physical parameters describing the transversal isotropy.

Słowa kluczowe

EN

limit condition; anisotropic body; transversal isotropy

PL

warunek graniczny; ciało anizotropowe; izotropia poprzeczna

• Wydawca: Instytut Podstawowych Problemów Techniki PAN
• Czasopismo: Archives of Mechanics
• Rocznik: 2002
• Tom: Vol. 54, nr 5-6
• Strony: 497--523
• Opis fizyczny: Bibliogr. 17 poz.

Twórcy

autor

Kowalczyk K.

• Institute of Fundamental Technological Research Polish Academy of Sciences, Świętokrzyska 21, 00-049 Warsaw

autor

Ostrowska-Maciejewska J.

• Institute of Fundamental Technological Research Polish Academy of Sciences, Świętokrzyska 21, 00-049 Warsaw

Bibliografia

• 1. W.T. Burzyński, Study of the strength hypotheses, [in Polish| Lwow, 1928/also „Collected Papers”, 1, PWN, Warszawa 1982.
• 2. H. Hencky, Zur Theorie plastischer Deformationen und der hierdurch im Material her- vorgerufenen Nachspannungen, ZAMM, 4, 323 334, 1924.
• 3. R. Hill, A theory of the yielding and plastic flow of anisotropic metals, Proc. Roy. Soc., 193 (Ser.A) 281-297, 1948.
• 4. R. Hill, Mathematical theory of plasticity, Oxford: Clarendon Press, 1950.
• 5. M. T. Huber. Distortion strain energy as a measure of strength of the material, [in Polish] Czas. Tech. XXII, Lwow 1904/also „Papers”, 1, 2, 3 -20, PWN Warszawa 1956. Czas. Techn., XXII, Lwów 1904. (Pisma I-II, s. 3-20, PWN, Warszawa 1956).
• 6. S. Jemioło and K. Kowalczyk, Invariant formulation and spectral decomposition of Hill's anisotropic yield condition [in Polish], Prace Naukowe PW, Budownictwo, z. 133, 87 123, 1999.
• 7. J.C. Maxwell, Proc. Cambridge Phil. Soc., 32, 1936 (also Origins of Clerk Maxwell’s electric ideas as described in familiar letters to William Thompson, ed. by Sir J. Larmor, Cambridge at Univ. Press, 1937).
• 8. W. Olszak and J. Ostrowska-Maciejewska, The plastic potential in the theory of anisotropic elastic-plastic solids, Engng. Fracture Mech., 21, 4, 625 632, 1985.
• 9. J. Ostrowska-Maciejewska and J. Rychlewski, Plane elastic and limit states in anisotropic solids, Arch. Mech., 40, 4, 79 386, 1988.
• 10. B. Raniecki and Z. Mróz, On the strain-induced anisotropy and texture in rigid-plastic solids, Inelastic Solids and Structures (Antoni Sawczuk memorial volume), Prineridge Press, Swansea, U.K., 1990.
• 11. J. Rychlewski, “CEIIINOSSSTTUV", Mathematical structure of elastic bodies, [in Russian], Technical Report 217, Inst. Mech. Probl. USSR Acad. Sci., Moscow, 1983.
• 12. J. Rychlewski, Elastic energy decomposition and limit criteria [in Russian], Advances in Mechanics, 7, 3, 1984.
• 13. J. Rychlewski, On Hook’s law [in Russian], PMM, 48, 420-435, 1984. See translation Prikl. Matem. Mekhan., 48, 303-314, 1984.
• 14. J. Rychlewski, Unconventional approach to linear elasticity, Arch. Mech., 47, 2, 149171, 1995.
• 15. S. Sutcliffe, Spectral decomposition of the elasticity tensor, J. Appl. Mech., 59. 4, 762773, 1992.
• 16. R.von Mises, Mechanik der festen Körper im plastisch deformablen Zustand, Nachnchten der Königlichen Gesellschaft der Wissenschaften zu Göttingen, Math-Phys. 1, 4, 582-592, 1913.
• 17. R.von Mises, Mechanik der plastischen Formändcrung von Knstallen, Zeitschrift für Angewandte Mathematik und Mechanik, 8, 161 185, 1928.