The influence of constructional parameters on stiffened plates sound radiation

• Autorzy: Iwaniec M.
• Języki publikacji: EN

Abstrakty

EN

This work concerns the method of the plate parameter selection and the choice of the stiffening set, assuming the minimization or maximization of the energy stored or radiated by a stiffened plate as a criterion. The energy balance equations based on the SEA method were used in order to quickly evaluate the energy flow as a function of chosen constructional parameters. Calculations of mechano-acoustic energy flow were performed in AutoSEA and Matlab environment.

Słowa kluczowe

EN

stiffened plate; energy balance; SEA method; sound power

• Wydawca: Instytut Podstawowych Problemów Techniki PAN ; Komitet Akustyki PAN ; Polskie Towarzystwo Akustyczne
• Czasopismo: Archives of Acoustics
• Rocznik: 2005
• Tom: Vol. 30, No. 4
• Strony: 483--494
• Opis fizyczny: Bibliogr. 13 poz., rys., tab., wykr.

Twórcy

autor

Iwaniec M.

• AGH University of Science and Technology, Faculty of Mechanical Engineering and Robotics, Structural Acoustics and Smart Materials Group, Al. Mickiewicza 30, 30-059 Kraków, Poland,

Bibliografia

• [1] AutoSEA – User guide, Vibro-Acoustic Sciences Limited, 1992.
• [2] BEDAIR O. K., Fundamental frequency determination of stiffened plates using sequential quadratic programming, JSV, 199, 87–106 (1997).
• [3] CARACCIOLO A., VALETTE C., Damping mechanisms governing plate vibration, Acta Acoustica, 3, 394–404 (1995).
• [4] LALOR, N., The evaluation of SEA coupling loss factors, Proc. V School Energy Methods in Vibroacoustics – Supplement, Kraków–Zakopane 1996.
• [5] LIEW K. M., HUNG K. C., LIM M. K., Three-dimentional vibration of rectangular plates: Effect of thickness and edge constraints, JSV, 709–720 (1995).
• [6] LJUNGGREN S., Mechanical excitation of plates at low frequencies: A discussion on the use of the bending wave equation, Acta Acoustica, 3, 531–538 (1995).
• [7] LYON R., DEJONG R., Theory and application of statistical energy analysis, Butterworth–Heinemann, Boston 1995.
• [8] LYON R., Statistical energy analysis of dynamical systems – Theory and applications, M.I.T. Press, Cambridge Mass, 1974.
• [9] PANUSZKA R., The influence of stiffness and boundary condition of thin rectangular plates on radiated acoustic power, Applied Acoustics, 46, 345–362 (1995).
• [10] REMINGTON P. J., MANNING J. F., Comparison of statistical energy analysis power flow predictions with an exact calculation, J. Acoust. Soc. Am., 57, 2, 374–379 (1975).
• [11] SEA design for noise and vibration, Muller BBM, München 1995.
• [12] VERHEIJ J. W., DITTRICH M. G., SNELL P. J., Fast computational method for sound transfer of plate- and box-like structures: Model and application.
• [13] NORRIS A. N., VEMULA C., Scattering of flexural waves on thin plates, Journal of Sound and Vibration, 181, 115–125 (1995).