PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

The analysis of the influence of the thermal shocks on acoustic emission signal generated in cordierite ceramics

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
The paper describes a raw materials composition and manufacturing technology of cordierite material, applied to manufacturing of welding backing strips. The resistance of the cordierite specimens to thermal shock within the range of 150-320°C was analysed. Shocked samples, submitted to three - point mechanical stress, have been investigated by acoustic emission method. The results let the authors to conclude that there is a correlation between the Acoustic Emission (AE) signals parameter, describing the AE activity during the loading and the stage of material degradation caused by the applied thermal shock.
Słowa kluczowe
Rocznik
Strony
67--72
Opis fizyczny
Bibliogr. 6 poz., tab., wykr.
Twórcy
  • Polish Academy of Sciences Institute of Fundamental Technological Research
  • Polish Academy of Sciences Institute of Fundamental Technological Research
Bibliografia
  • [1] C.Y. Jian, T. Shimizu, T. Hashida et al., Development of thermal shock and fatigue tests of ceramic coatings for gas turbine blades, J. of Acoustic Emission, 13, 3-4, S68-S74 (1995).
  • [2] K. Konsztowicz, Acoustic emission study of the resistance to thermal shock of ceramic materials, J. Am. Ceramic Soc., 73, 3, 502-508 (1990).
  • [3] K. Ono, AE Arising from Plastic Deformation and Fracture, Fundamentals of AE, Univ. of California, Los Angeles 1979, pp. 167-207.
  • [4] Polish Standard No. PN–86/E–06301 “Insulating ceramic materials. Classification and requirements”, Alfa, Polish Standard Publ., 1986.
  • [5] J. Ranachowski, P. Ranachowski and J. Bertrand, Acoustic emission in thermomechanic tests of line insulators [in Polish] [in:] New Methods of Technology and Materials Science, IFTR PAS, Warszawa 1999, pp. 47-59.
  • [6] Z. Ranachowski, Acoustic emission measurements in ceramic, wood and metals [in Polish], Scientific Bulletins of University of Mining and Metallurgy, 14, 2, Kraków 1995, pp. 130-142.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT3-0006-0008
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.