Estimation of local material and structure parameters of a polycrystalline aggregate from ultrasonic measurements

• Autorzy: Lewandowski J. , Adamski M. , Deputat J.
• Języki publikacji: EN

Abstrakty

EN

The propagation velocities of four ultrasonic waves in a steel plate are measured in twelve equally spaced observation points lying in a rolling plane on a straight line perpendicular to the rolling direction. The plate material was rolled plastically and uniaxially in the situation where the edges parallel to the rolling direction were free. The plate is considered to be a bulk sample with orthorhombic symmetry of bulk mechanical properties made of cubic crystals of the highest symmetry. The local probability density function of the crystallite orientation and the local effective stiffness moduli of a single grain (crystallite) are found from four ultrasonic velocities and the rules of orthorhombic symmetry and Jaynes' principle of maximum Shannon entropy. These results, which have been obtained for twelve mesodomains centered at each of the twelve observation points, show the effect of the distance between an observation point and a free plate edge on the local effective stiffness moduli and on the local probability density function of the crystallite orientation.

• Wydawca: Instytut Podstawowych Problemów Techniki PAN ; Komitet Akustyki PAN ; Polskie Towarzystwo Akustyczne
• Czasopismo: Archives of Acoustics
• Rocznik: 2001
• Tom: Vol. 26, no. 4
• Strony: 331--349
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Lewandowski J.

• Polish Academy of Sciences Institute of Fundamental Technological Research (00-049 Warszawa, ‘wi¦tokrzyska 21, Poland)

autor

Adamski M.

• Polish Academy of Sciences Institute of Fundamental Technological Research (00-049 Warszawa, ‘wi¦tokrzyska 21, Poland)

autor

Deputat J.

• Polish Academy of Sciences Institute of Fundamental Technological Research (00-049 Warszawa, ‘wi¦tokrzyska 21, Poland)

• Polish Academy of Sciences Institute of Fundamental Technological Research, 00-049 Warszawa, Świętokrzyska 21, Poland

Bibliografia

• [1] J. Lewandowski, Maximum-entropy estimate of the orthorhombic texture from ultrasonic measurements, Ultrasonics, 229-238 (1995).
• [2] J. Lewandowski, Determination of material parameters and texture of a polycrystalline aggregate from ultrasonic measurements, NDT&E International, 32, 383-396 (1999).
• [3] R.J. Roe, Inversion of pole figures for materials having cubic crystal symmetry, J. Appl. Phys., 37, 2069-2072 (1966).
• [4] E. Kroner, Statistical continuum mechanics, Lecture Notes, Springer, Berlin 1971.
• [5] M.J.P. Musgrave, Crystal acoustics, Holden Day, San Francisco 1970.
• [6] W. Voigt, Lehrbuch der Krystall Physik, Teubner, Leipzig 1928.
• [7] A. Reuss, Z Angew: Math Mech, 9, 49 (1924).
• [8] R.J. Hill, Mech. Phys. Solids, 5, 229 (1957).
• [9] C.M. Sayers, Ultrasonic velocities in anisotropic polycrystalline aggregates, J. Phys D: Appl. Phys., 15, 2157-2167 (1982).
• [10] E.T. Jaynes, Information theory and statistical mechanics, Phys. Rev., 106, 620-630 (1957).