Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
Power Quality, in terms of power factor and harmonics, is greatly hampered by a three-phase rectifier used as a front-end ac-to-dc converter in many systems including a UPS. This paper presents the high power factor operation of the converter with reduced total harmonic distortion up to 4%. The power quality up gradation is due to high-frequency current injection, at the input of the front-end rectifier. A small filter is required at the output for filtering the high-frequency content. Sinusoidal PWM technique is used for controlling the output voltage. DSP is used for generating the desired gate pulses. The converter has high efficiency, low EMI emissions, high power packing density and suitable for UPS system. A Simulation and experimentation is carried out on a 3 kW converter and experimental results are in good agreement with simulation results.
Rocznik
Tom
Strony
35--39
Opis fizyczny
Bibliogr. 16 poz., rys.
Twórcy
autor
autor
- Visvesvaraya National Institute of Technology, Nagpur, India
Bibliografia
- 1. Shipp D.D., Vilcheck W.S.: Power quality and line considerations for variable speed drives. IEEE Trans. Ind. Applicat., Mar. /Apr. 1996.
- 2. Chaudhary M.A., Suryawanshi H.M.: High-power–factor operation of three–phase ac-to-dc resonant converter, IEE-PA, vol. 153, nO. 6, Nov 2006, pp 873–882.
- 3. Suryawanshi H.M., Thakre K.L.: Tarnekar S.K., Kothari G., and Kothari D.P.: Power factor and closed loop control of an AC-to-DC Converter, IEE proc.-Electr. Power Apppl., vol.149.
- 4. Lai J.S., Key T.S.: Harmonic standards: Impact of power electronics equipment design, Power electronicTechnology, vol. 58, Aug. 2000, pp.1–13.
- 5. Prasad A.R., Ziogas P.D., Manias S.: An active power factor correction technique for three-phase diode rectifiers, IEEEPESC Record, pp. 58–66, 1989.
- 6. Qiu D.Y., Henry S.C., Chung S.H. and Ron Hui S.Y.: Single current sensor control for single-phase active power factor correction, IEEE transactions on Power Electronics, vol. 17, no. 5, September 2002, pp. 623–631.
- 7. Huang Q., Lee F.C.: Harmonic reduction in a single-switch, three-phase boost rectifier with higher order harmonics injected PWM, IEEE- PESC 1996 Rec., pp. 1266–1271.
- 8. Maswood A.I. and Liu F.: A unity power factor front end rectifier with hysteresis current control, IEEE transactions on Energy Conversion, vol. 21, no. 1, March 2006, pp. 69–76.
- 9. Hamdad F.S., Bhat A.K.S.: Three-phase single stage ac/dc boost integrated parallel resonant converter, IEEE transactions on Aerospace and Electronic Systems, vol. 40, no. 4, Oct. 2004, pp. 1311–1323.
- 10. Belaguli, and Bhat A.K.S.: High power factor operation of DCM series-parallel resonant converter, IEEE Transactions on Aerospace and Electronic Systems, vol. 35, no. 2, April 1999, pp. 602–613.
- 11. Cross M.S., and Forsyth A.J.: A high-power-factor, threephase isolated ac–dc converter using high-frequency current injection, IEEE transactions on Power Electronics, vol. 18, no. 4, July 2003, pp. 1012–1019.
- 12. Bellar M., Wu T., Tchamdjou A., Mahdavi J., and Ehsani M.: A review of soft-switched dc-ac converters, IEEE transactions on Industrial Appl., vol. 34, July 1998, pp. 847–860.
- 13. Divan D.M.:Theres onantdc-link converter-A new concept instatic power conversion, in proc. IEEE-IAS Annu. Meeting, 1986, pp. 648–656.
- 14. Vlatkovic V., Boroyevich D., Lee F.C., Caudros C., and Gatatric S.: A new zero-voltage-transition three-phase PWM rectifier/inverter circuit, in proc. IEEE-PESC Conf., 1993, pp. 868–873.
- 15. Tomasin P.: A novel topology of zero-current switching voltagesource PWM inverter for high power applications, in proc. IEEE-PESC Conf., 1995, pp. 1245–1251.
- 16. Li Y., Lee F.C., Boroyevich D.: A three-phase soft-transition inverter with a novel control strategy for zero-current and near zerovoltage switching, IEEE transactions on Power Electronics, vol.16, no. 5, Sept. 2001, pp.710–723.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT2-0004-0038
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.