Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
The isothermal transformation of austenite into the upper bainite in the ductile cast iron
Konferencja
Współczesne Zagadnienia w Materiałoznawstwie i Technologii Bezwiórowej (1998 ; Bydgoszcz, Polska)
Języki publikacji
Abstrakty
Niestopowe żeliwo sferoidalne o osnowie ferrytycznej wygrzewano w temperaturze 830 i 870 stopni C. Wychładzanie przeprowadzono w temperaturze T[pi] = 400 stopni C w czasie t[pi] od 0,5 do 480 minut. Wykonano ilościowe badania strukturalne i rentgenowską analizę fazową oraz pomiary twardości żeliwa. Analizowano kinetykę przemiany i stan fizykochemiczny faz osnowy. Oceniono rolę temperatury wygrzewania oraz czasu przemiany izotermicznej na kształtowanie struktury i twardości żeliwa.
Ferrite ductile cast iron was subject to austenitising at the temperature of 830 and 870 grades C. Austempering was performed at T[pi] = 400 grades C within time frames from t[pi] 0,5 to 480 minutes. A structural quantitative study and an X-ray diffraction and hardness test analyses were perfomed. A study of the transformation kinetics of the upper bainite and the physicochemical conditions of the phases were also conduted. The influence of the holding temperature and the time of the isothermal transformation on the shape of the structure and hardness of the ductlile cast iron were determined
Słowa kluczowe
Rocznik
Tom
Strony
207--215
Opis fizyczny
Bibliogr. 29 poz.,Rys., wykr.,
Twórcy
autor
autor
- Akademia Techniczno-Rolnicza, Wydział Mechaniczny, ul. S. Kaliskiego 7, 85-796 Bydgoszcz
Bibliografia
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT2-0001-1458