Implementation of a digital signal processor-controlled shunt active filter

• Autorzy: Limongi L. R. , Cavalcanti M. C. , Neves F. , Azevedo G. M.
• Języki publikacji: EN

Abstrakty

EN

This paper presents the implementation of an active filter configuration for harmonic compensation. The system can be controlled for current harmonics and reactive power compensations simultaneously by using a converter operating as active shunt filter. A synchronous reference frame based controller is compared to an instantaneous reactive power based controller. The synchronous reference frame method is chosen to control the converter due to the better performance when the supply voltage is distorted. A shunt active filter system has been designed and built to meet IEEE 519 recommended harmonic standards. Simulation demonstrates the good performance of the active filter configuration. Experimental results, corresponding to the operation of the digital signal processor-controlled shunt active filter are also presented.

Słowa kluczowe

EN

active filters; current control; power quality

• Wydawca: AGH University of Science and Technology ; Lodz University of Technology
• Czasopismo: Electrical Power Quality and Utilisation. Journal
• Rocznik: 2006
• Tom: Vol. 12, nr 2
• Strony: 5--14
• Opis fizyczny: Bibliogr. 20 poz.

Twórcy

autor

Limongi L. R.

autor

Cavalcanti M. C.

autor

Neves F.

autor

Azevedo G. M.

• UFRO, Recife - PE - Brasil, Brasile

Bibliografia

• 1. Bhattacharya S., Divan D.M. and Banerjee B.: Active Filter Solutions for Utility Interface. Industrial Electronics, 1995. ISIE ’95, Proc. of the IEEE International Symposium on, Vol. 1 pp 53-63.
• 2. Singh B., Al-Haddad K . and Chandra A.: A Review of Active Filters for Power Quality Improvement. IEEE/Trans. Ind. Elect. 1999, 5, 46, pp 960-971.
• 3. Mendalek N. and Al-Haddad K.: Modeling and nonlinear control of shunt active power filter in the synchronous reference frame. Harmonics and Quality of Power, 2000, Proc. Ninth International Conference, 5, 1, pp 30-35.
• 4. Bhattacharya S., Frank T.M., Divan D.M. and Banerjee B.: Active filter System Implementation. IEEE Ind. Appl. Magazine, 1998, 4, 5 pp 47-63.
• 5. Fujita H. and Akagi H.: The Unified Power Quality Conditioner: The integration of Series- and Shunt- Active Filters. IEEE/Trans. Power. Elec. 1998, 2, 13, pp 315-322.
• 6. Peng F.Z., Akagi H. and Nabae A.: A Novel Harmonic Power Filter. IEEE/PESC, 1988, pp 1151-1158.
• 7. Fujita H. and Akagi H.: A New Approach to Harmonic Compensation in Power Systems- A Combined System of Shunt Passive and Series Active Filters. IEEE/Trans. Ind. Appl. 1990, 6, 26, pp 983-989.
• 8. Fujita H. and Akagi H.: A Practical Approach to Harmonic Compensation in Power Systems- Series Conection of Passive and Active Filters. IEEE/Trans. Ind. Appl., 1991, 6, 27, pp 1020-1025.
• 9. Fujita H. and Akagi H.: A New Power Line Conditioner for Harmonic Compensation in Power Systems. IEEE/Trans. Power. Del., 1995, 3, 10, pp 1570-1575.
• 10. Mendalek N . and Al-Haddad K.: Nonlinear control strategy applied to a shunt active power filter. Power Electronics Specialists Conference, 2001. PESC. 2001 IEEE 32nd Annual, 4, pp 1877-1882.
• 11. Akagi H., Kanagawa Y. and Nabae A.: Generalized Theory of Instantaneous Reactive Power in Three-Phase Circuits. Int. Conf. Power Electronis, Tokio, 1983.
• 12. Akagi H., Kanagawa Y. and Nabae A.: Instantaneous Reactive Power Compensator Comprising Swicthing Devices Without Energy Storage Components. IEEE/Trans. Ind. Applic., 1984, 2, Vol IA-20.
• 13. Watanabe E.H ., Stephan R.M. an d Aredes M.: New Concepts of Instantaneous Active and Reactive Power In Electrical Systems with Generic Loads. IEEE/Trans. power. Deliv., 1993, 2, 8.
• 14. Bhattacharya S. and Divan D.: Synchronous Frame Based Controller Implementation for a Hybrid Series Active Filter system. In Conf. Rec. IEEE-IAS Annu. Meeting, 1995, pp 2531-2540.
• 15. Kaura V. and Blasko V.: Operation of a Phase Locked Loop System Under Distorted Utility Conditions. Trans. Ind. Applic., 1997, 33, 1, pp 58-63.
• 16. Texas Instruments: TMS320F28x Analog-to-Digital Converter (ADC) Peripheral Reference guide. Literature number: SPRU060, june 2002.
• 17. Texas Instruments: TMS320F28x System Control and Interrupts Peripheral Reference guide. Literature number: SPRU078, may 2002.
• 18. Texas Instruments: TMS320F28x Event Manager (EV) Peripheral Reference guide. Literature number: SPRU065, may 2002.
• 19. Hava A.M., Kerkman R.J. and Lipo T.A.: Simple Analytical and Graphical Tools for Carrier Based PWM Methods. IEEE Power Electronic Specialists Conference, 1997, pp. 1462-1471.
• 20. Jacobina C.B., Lima A.M.N., da Silva E.R.C., Alves R.N.C . and Seixas P.F.: Digital Scalar Pulse-width Modulation: A Simple Approach to Introduce Non-Sinusodial Modulating Waveforms. IEEE/Trans. Power Elec., 2001, 3, 16, pp 351-359.