PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Optimization of desliming prior to phosphate ore upgrading by flotation

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Optymalizacja odszlamiania poprzedzającego wzbogacanie fosforytów metodą flotacji
Języki publikacji
EN
Abstrakty
EN
Flotation is one of the most efficient techniques applied for phosphate upgrading. Desliming of flotation feed is a critical pre-request step for successful phosphate/gangue separation by flotation. Generally, the target of the desliming step is to minimize the feed fines to avoid their negative effects during flotation. However, such slimes normally contain phosphates which are considered as losses. An effective desliming should pay attention to minimizing the losses of phosphate bearing minerals in the removed slimes and, as a second target, to keep high phosphate recovery in the flotation feed. In this paper optimization of the desliming stage to achieve both targets at-a-time was studied using different techniques at different operating conditions. The applied slimes removal techniques included screening and hydrocycloning. It was found that desliming using hydrocyclone, at its optimum operating conditions, is better than desliming using screens. This is because the deslimed product contained small amount of phosphate slimes leading to efficient separation by flotation with an overall selectivity index B=0.739 defined by formula (wzór) where ĺε 1,c= P2O5 recovery in flotation concentrate, %; ĺε 2,t = MgO recovery in both slimes and flotation tail, % .
PL
Flotacja jest jedną z najbardziej efektywnych technik stosowanych do wzbogacania fosforytów. Odszlamianie nadawy flotacyjnej jest ważnym warunkiem wstępnym dobrej separacji fosforytów od skały płonnej. Ogólnie, celem etapu odszlamiania jest minimalizacja ilości drobnych ziarn dla uniknięcia ich negatywnego wpływu na flotację. Jednakże szlamy zawierają także fosforany, które zostają tracone. Efektywne odszlamianie powinno brać pod uwagę minimalizację strat fosforanów w usuwanych drobnych ziarnach oraz pozwolić na utrzymywanie wysokiej zawartości fosforanów w nadawie flotacyjnej. W tej pracy optymalizowano etap odszlamiania dla uzyskania obu celów jednocześnie. Użyto różnych technik badawczych stosując zróżnicowane warunki technologiczne. Jako sposób usuwania drobnych ziarn zastosowano przesiewanie i klasyfikację w hydrocyklonach. Stwierdzono, że w optymalnych warunkach odszlamianie w hydrocyklonach jest lepsze niż na sitach. Odszlamiany materiał zawiera małe ilości fosforanów i dlatego prowadzi to do efektywnej separacja za pomocą flotacji a wskaźnik selektywności B, zdefiniowany jako (wzór) osiąga wartość 0.739, gdzie ε 1,c oznacza uzysk P2O5 w koncentracie flotacyjnym w %, podczas gdy ε 2,t oznacza uzysk MgO w szlamach jak i w odpadzie flotacyjnym (w %) .
Słowa kluczowe
Rocznik
Tom
Strony
79--88
Opis fizyczny
Bibliogr. 15 poz.
Twórcy
  • Central Metallurgical Research and Development Institute (CMRDI), P.O. Box, 87, Helwan, Cairo, Egypt.
Bibliografia
  • ABDEL-KHALEK N.A., Farrah S., 2004, Surface modification for advancing separation processes and environment protection, US-Egypt joint project, Academy of Science Research &Technology, Cairo, Egypt.
  • AHMED H. A. M., 2005, Application of microemulsion for upgrading difficult-to-float materials, Ph.D. thesis, Faculty of Mining Geoengineering and Geology, Wroclaw University of Technology, Poland.
  • ANAZIA I.J., HANNA J., 1987, New flotation approach for carbonate phosphate separation, Minerals and Metallurgical Processing, November, pp. 196-202.
  • DRZYMAŁA J., AHMED H.A.M., 2005, Mathematical equations useful for approximation of separation results using the Fuerstenau upgrading curves, International Mineral Processing Journal, 76, pp. 55-65.
  • EL-MAHDY A., 2004, Ph. D. thesis, Faculty of Engineering, Cairo university, Egypt.
  • EWING, G. W., 1975, Instrumental methods of chemical analysis.
  • HOUOT R., 1982, Beneficiation of phosphate ores through flotation: Review of industrial application and potential developments, International Journal of Mineral Processing, Vol. 9, pp. 353-384.
  • HUYNH L., FEILER A., MICHELMORE A., RALSTON J., JENKINS P., 2000, Control of slime coatings by the use of anionic phosphates: a fundamental study, Minerals Engineering, vol. 13, No. 10-11, pp. 1059-1069.
  • LAWNDY A.B.T., STEVEN J.V., 1993, Flotation of high-iron phosphate ores and phosphatic iron ores, in beneficiation of phosphate: theory and practice; H. Elshall; B. M. Moudgill; and R. Wiegel (edts), pp. 29-43.
  • PATRICK Z.; YU Y.; BOGAN M; 1996, Challenging the CRAGO double float process. II. Amine-fatty acid flotation of siliceous phosphates, Mineral Engineering '96 Conference, Brisbane, Aug. 26-29.
  • PATRICK Z., ROBERT S., YINGXUE Y., Michael B., 2001, Recovery of phosphate from Florida phosphatic clays, Florida Institute of Phosphate Research (FIPR) project number: 93-02-096R, final report.
  • Restarick C.J., 1989, Classification with two-stage cylinder-cyclones in small-scale grinding and flotation circuits, International Journal of Mineral Processing, Volume 26, Issues 3-4, Pages 165-179
  • SCOTT, W.W., 1949, Standard method of chemical analysis, Longman, London.
  • XIAPENG ZHENG, ARPS P.J , SMITH R.W. , 2001, Adhesion of two bacteria onto dolomite and apatite: their effect on dolomite depression in anionic flotation, Int. J. Miner. Process. 62, 159–172.
  • YINGXUE YU et al., 1995, Amine-fatty acid flotation of siliceous phosphates, another challenge of the CRAGO double float process, 10 th Annual Regional Phosphate Conference, Lakeland, Fla.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT1-0026-0007
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.