Rozpoznawanie przypadków w zbiorze danych diagnostyki laserowej

• Autorzy: Mazurkiewicz D.

Warianty tytułu

EN

Features extraction from laser diagnostic data

• Języki publikacji: EN

Abstrakty

EN

This paper describes how is it possible to extract knowledge from combustion engineering and its experimental data. It is far away to apply computer science approach for understanding of physical and chemical properties in combustion diagnostics data. In this paper, these subjects and the way of thinking are discussed: how to see the flow and combustion, how to make instrumentation, how to obtain and analyse the data, how optimize the experiment, and how to extract knowledge and optimize the system. This research is conceptual, that is focus-sing on understanding the problem and its solution. The aim of this paper is also to present and discuss new challenges for Computer Science engineering applications related to combustion. All presented results were obtained during author's scholarships at the Kobe University in Japan.

Słowa kluczowe

EN

laser diagnostic; combustion; computer science; experimental data; neural networks

• Wydawca: Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne
• Czasopismo: Eksploatacja i Niezawodność
• Rocznik: 2004
• Tom: nr 1
• Strony: 49--54
• Opis fizyczny: Bibliogr. 24 poz.

Twórcy

autor

Mazurkiewicz D.

• Technical University of Lublin, ul. Nadbystrzycka 36, 20-816 Lublin,

Bibliografia

• [1] Allgoewer F., Zheng A. (Ed.): Nonlinear Model Predictive Control. Birhauser Verlag, Basel-Boston-Berlin 2000
• [2] Attoui A.,: Real-time and Multi-agent Systems. Springer-Verlag, London 2000
• [3] Blasco J. A., Fueyo N., Dopazo C., Ballester J.: Modelling the Temporal Evolution of a Reduced Combustion Chemical System With an Artificial Neural Networks. Combustion and Flame, Nr. 113 (1998), pp.: 38-52
• [4] Blasco J. A., Fueyo N., Larroya J. C., Dopazo C., Chen Y.-J.: A single-step time-integrator of a methane-air chemical system using artificial neural networks. Computers and Chemical Engineering, Nr. 23 (1999), pp.: 1127-1133
• [5] Chigier N. (Ed.): Combustion Measurement. Hemisphere Publishing Corporation, New York 1991
• [6] Glassman I.: Combustion. Academic Press, San Diego 1987
• [7] Homma R., Chen J.-Y.: Combustion Process Optimization by Genetic Algorithms: Reduction of NO2 Emission via Optimal Post-flame Process. The Twenty Eight International Symposium on Combustion
• [8] Hunicz J., Mazurkiewicz D., Niewczas A.: Flame Spectrum Analysis with the use of Artificial Neural Networks. SAE Papers, Detroit 2002
• [9] Ikeda Y., Mazurkiewicz D.: Data Mining Aided Analysis In Laser Diagnostic Experiments. Discovery Science 2000, Progress Report Edited by S. Arikawa, M. Sato, T. Sato, A. Marouka, S. Miyano, Y. Kanada. Kyoto (Japan), December 2000, pp.: 88-90
• [10] Ikeda Y., Mazurkiewicz D.: Neural Network for PDA Droplet Size Classification. Japanese Society for Artificial Intelligence (JSAI). March 2001, pp.: 215-221
• [11] Ikeda Y., Mazurkiewicz D.: Application of Neural Network Technique to Combustion Spray Dynamics Analysis. Lecture Notes in Artificial Intelligence 2281, Subseries of Lecture Notes in Computer Science edited by J.G. Carbonell and J. Siekmann, Volume editors: S. Arikawa and A. Shinohara, Springer-Verlag Berlin, 2002, pp.: 408-425
• [12] Ikeda Y., Nakajima T., Kurihara N.: Spray formation and dispersion of size-classified fuel droplet of air-assist injector. Eighth International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, July 8-11 1996
• [13] Ikeda Y., Nakajima T., Kurihara N.: Size-Classified Droplet Dynamics and its Slip Velocity Variation of Air-Assist Injector Spray. SAE Technical Paper Series 1997 (paper nr 970632)
• [14] Kawahara N., Ikeda Y., Hirohata T., Nakajima T.: Size-Classified Droplets Dynamics of Combustion Spray in 0.1 MW Oil Furnace. Eighth International Symposium on Applications of Laser Techniques to Fluid Mechanics. Lisbon, Portugal, July 8-11 1996, pp. 10.5.1-10.5.12
• [15] Kuo K. K.: Principles of Combustion. A Wiley-Interscience Publication, New York 1986
• [16] Lefebvre A. H.: Atomization and Sprays. Hemisphere Publishing Corporation, New York 1989
• [17] Leiviska K.: Industrial Applications of Soft Computing – Paper, Mineral and Metal Processing Industry. A Springer-Verlag Company, Heidelberg, New York, 2001
• [18] Mazurkiewicz D.: Data Mining – new concept in data processing. Journal of Maintenance and Reliability. Nr 2/1999, pp.: 24-30
• [19] Nogawa H., Nakajima Y., Sato Y., Tamura S.: Acquisition of Symbolic Description from Flow Fields: A New Approach Based on a Fluid Model. IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 19, No. 1, January 1997, pp.: 58-62
• [20] Norgaard M., Ravn O., Poulsen N. K., Hansen L. K.: Neural networks for modeling and control of dynamic systems. Springer-Verlag, London 2000
• [21] Roy G. (Ed.), 1998 – “Propulsion Combustion. Fuels to Emissions”. Combustion: An International Series. Taylor and Francis, New York 1998
• [22] Sohlberg B.: Supervision and control for industrial processes – advances in industrial control. Springer-Verlag, London 1998
• [23] Taylor A.M.K.P. (Ed.): Instrumentation for Flows with Combustion. Academic Press, London 1993
• [24]. Zhong J., Huang T. S., Adrian R. J: Extracting 3D Vortices in Turbulent Fluid Flow. IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 20, No. 2, February 1998, pp.: 193-199