Tytuł artykułu
Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
The investigation of discreteness in material of catalytic pipes by the eddy current method
Języki publikacji
Abstrakty
W artykule przedstawiono wyniki badań prądami wirowymi i badań metalograficznych przeprowadzonych na odlewanych odśrodkowo rurach fi l56 x 16 wykonanych z austenitycznej stali IN 519 po długotrwałej eksploatacji. Badania wykazały zmiany strukturalne i fazowe w materiale rur. Zmiany te zależne są od temperatury i czasu eksploatacji wpływając na własności mechaniczne rur. Na wewnętrznej powierzchni rur obserwowano wady odlewnicze.
The paper presents the results of eddy current and inelullogruphic investigations of centrifugal casted pipe (1)156 x 16 made from east steel IN 519 after long time operating. The investigations of the pipe samples shows the structural and phase changes in the material of tube. These changes depended on the temperature and time of exploitation and had influence on the. mechanical properties of the pipe. At inner surface of the lube the casting defects were observed.
Czasopismo
Rocznik
Tom
Strony
28--30
Opis fizyczny
Bibliogr. 6 poz.
Twórcy
autor
- Instytut Inżynierii Materiałowej, Politechnika Szczecińska, Al. Piastów 17, 70-310 Szczecin
autor
- Instytut Inżynierii Materiałowej, Politechnika Szczecińska, Al. Piastów 17, 70-310 Szczecin
Bibliografia
- [1] Jasiński W.: The Changes of the Reforming Catalytic Tubes Material Structures, 2002, ISSN 1392-1320 Materials Science (Medžiagotyra), Vol. 8, No. 2.
- [2] Ustasiak M., Jasiński W.: Wpływ warunków eksploatacji na strukturę stopów 24/24 Nb, Inżynieria Materiałowa, 2000, nr 1, s. 28 ÷ 32.
- [3] Jasiński W., Ustasiak M.: Zmiany mikrostruktury materiału rur katalitycznych reformera, Inżynieria Materiałowa, 1999, nr 6, s. 620 ÷ 623.
- [4] Managing steam reformer tubs, Nitrogen & Methanol, March-April 2002, No. 256, p. 29 ÷ 39.
- [5] Chou T., Huang W., Paciej R.: Stress corrosion cracking of pyrotherm reformer tube for steam-reforming hydrogen production, Journal of Materials Science, 1997, No. 32, p. 67 ÷ 72.
- [6] Łabanowski J., Krzysztofowicz K.: Damage accumulation in cast steel reformer tubs, Inżynieria Materiałowa, 2001, nr 4, s. 554 ÷ 557.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAT1-0004-0044