Potential cupola slag utilization in the production of concrete

• Autorzy: Demeter P. , Baricová D. , Pribulová A.
• Języki publikacji: SK

Abstrakty

EN

The paper presents results from the research of the blast furnace and cupola slag utilization in the concrete production. Pilot experiments of the concrete production were performed, by that the blast furnace and cupola furnace slag with a fractions of 0–4 mm; 4–8 mm; 8–16 mm were used as a natural substitute. A cupola slag and combination of the blast furnace and cupola slag were used in the experiments. The analysis results show that such concretes are suitable for less demanding applications.

Słowa kluczowe

PL

beton; właściwości mechaniczne; żużel; piec

EN

slag; blast furnace slag; cupola furnace slag; mechanical properties

• Wydawca: Instytut Metalurgii Żelaza im. Stanisława Staszica
• Czasopismo: Prace Instytutu Metalurgii Żelaza
• Rocznik: 2009
• Tom: T. 61, nr 5
• Strony: 13--14
• Opis fizyczny: Bibliogr. 3 poz.

Twórcy

autor

Demeter P.

• Technical Universuty in Kosice, Faculty of Metallurgy, Department of Iron Metallurgy and Foundry

autor

Baricová D.

• Technical Universuty in Kosice, Faculty of Metallurgy, Department of Iron Metallurgy and Foundry

autor

Pribulová A.

• Technical Universuty in Kosice, Faculty of Metallurgy, Department of Iron Metallurgy and Foundry

• Technical university in Košice, Faculty of Metallurgy, Department of Iron Metallurgy and Foundry

Bibliografia

• 1. STN 73 1313 Stanovenie obsahu vzduchu v prevzdušnenej betónovej zmesi.
• 2. STN 73 1326 Stanovenie odolnosti povrchu cementového betónu proti pôsobeniu vody a chemických rozmrazovacích látok.
• 3. Slimák J.: Príspevok k otázkam navrhovania zloženia betónových zmesí In: Zborník prednášok zo seminára Výroba betónu, TU Košice, Stavebná fakulta, 2000, s. 38–44.