Elements of design of production systems - methodology of machine tool selection in casing-class FMS

• Autorzy: Świć A. , Gola A.
• Języki publikacji: EN

Abstrakty

EN

The work presents a new methodology of computer aided FMS machine tools selection. Flexible manufacturing systems (FMS) are systems which allow manufacturing of parts in small lot sizes, keeping a high level of productivity and low costs of production. Despite the fact that applied research on designing FMS systems has been continued for several years, there are no methodological solutions that can help design engineers to select machine tools for FMS in an optimal way. This article shows the main stages of the methodology which is based on computer database systems, as well as the principles of elimination and optimisation.

Słowa kluczowe

EN

flexible manufacturing system; machine tool selection; machine tool design; evolutionary system of multicriteria analysis

PL

elastyczny system produkcji; metodologia; dobór maszyn

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2010
• Tom: Vol. 1, No. 2
• Strony: 72--80
• Opis fizyczny: Bibliogr. 21 poz., rys.

Twórcy

autor

Świć A.

autor

Gola A.

• Lublin University of Technology, Department of Enterprise Organization, Nadbystrzycka 38, 20-618 Lublin, Poland, phone: [phone],

Bibliografia

• [1] Gania I., Flexible manufacturing systems (FMS), Logistic, 5, 33-37, 2006.
• [2] Zawadzka L., Contemporary Problems and Development Directions of Flexible Manufacturing Systems, Gdansk University of Technology Publisher, Gdansk, 2007, pp. 16-47 - in Polish.
• [3] Warnecke H.J., Flexible Manufacturing Systems, IFS Publications Ltd., Kempston, UK, 12-27, 1985.
• [4] Harmonovsky C.M., Preliminary system design for flexible manufacturing systems (FMS): Essential elements, analysis tools and techniques, Control and Dynamic Systems, 46, 2, 83-122, 1991.
• [5] Banaszak Z, Jampolski Z., Computer Aided Modelling of Flexible Manufacturing Systems, WNT, Warsaw 1991 - in Polish.
• [6] Lis S., Santarek K., Strzelczak S., Organization of Flexible Manufacturing Systems, PWN, Warsaw, 1994, pp. 83-123 - in Polish.
• [7] Sawik T., Discrete optimization in the flexible manufacturing systems, WNT, Warsaw, 1992 - in Polish.
• [8] Borenstein D., Becker J.L., Santos E.R., A Systemic and Integrated Approach to Flexible Manufacturing System Design, Integrated Manufacturing Systems, 10, 1, 6-14, 1999.
• [9] Dorf R., Kusiak A., Handbook of Design: Manufacturing and Automation, John Wiley & Sons Inc., New York, 36-75, 2000.
• [10] Mohanty P.P., Evolutionary algorithm to solve an FMS design problem, International Journal of Manufacturing Technology and Management, 5, 3, 279-293, 2003.
• [11] Honczarenko J., Computer controlled machine tools, WNT, Warsaw 2008 - in Polish.
• [12] Honczarenko J., Słaby I., Methodology of machine tools selection, Mechanic, 3, 166-173, 2009 - in Polish.
• [13] Zawadzka L., Fundamentals of Flexible Manufacturing Control Systems Design, Technical and Economical Problems, Gdansk University of Technology Publisher, Gdansk, 2000 - in Polish.
• [14] Świć A., Taranenko W., Technological design of flexible manufacturing systems, Lublin University of Technology Publishers, Lublin 2003 - in Polish.
• [15] Gola A., Świc A., Brief preliminary design for a method of FMS machine tools subsystem selection, PAMM, 9, 1, 663-664, 2010.
• [16] Suh N.P., Axiomatic design. Advances and applications, Oxford University Press, New York 2001.
• [17] Ayag Z., Ozdemir R.G., A fuzzy AHP Approach to Evaluating Machine Tool Alternatives, Journal of Intelligent Manufacturing, 17, 2, 2006.
• [18] Balaji C.M. and oths., Selection of machine tools for FMS using ELECTRE III, Automation Science and Engineering, 2009.
• [19] Gola A., Świc A., Intelligent decision support system for FMS machine tool subsystem design, Applied Computer Science, 3, 1, 109-124, 2007.
• [20] Gola A., Preliminary design of quantitative concept of machine tools subsystem selection in the flexible manufacturing system, The Mechanic Review, 12, 65-68, 2006 - in Polish.
• [21] Harczenko A., Flexible Manufacturing Systems - CNC Machine Tools and Design, “Professional” Publisher, Kiev, 67-111, 2004 - in Ukrainian.