Collaborative engineering in products development and manufacturing

• Autorzy: Chlebus E.
• Języki publikacji: EN

Abstrakty

EN

The manufacture and consumption of market products shows ever growing trends, and this means not only the supply and demand volume but also, to a higher and higher extent, searching for new products distinguishable from the variety of products on the market. Not only new methods of market investigation have appeared to specify its requirements, but some attempts were also made at elaborating suitable methods and techniques of engineering to ensure flexible and synchronised reaction to market demands. Thus, it is necessary to find methods of functional, logical and structural combination of the so far existing engineering applications like CAx, RP/RT/RE, PDM/TDM, PPC/ERP, CE/SE and RDBMS techniques. Competitive actions in the "product market" make a manufacturer and his sub-suppliers respond to market signals quickly and adequately, and to permanently improve their internal organisation, as well as co-operation, logistic and service interconnections. A new challenge imposed to manufacturers by the competitive market is the so-called "product customisation", i.e. attending to an individual customer's requirements in the features of a series manufactured product. The general objective of customisation is to elaborate features of a product, manufacturing processes, documentation and production organisation in such a way that the product's individual features meet the customer's requirements and its manufacturing process, price and service do not stray from series manufactured products. This contradictory production strategy requires using the newest achievements of computer methods and tools, as well as the newest manufacturing technologies and systems.

Słowa kluczowe

EN

collaborative engineering; production modeling; process planning; product development; rapid manufacturing

PL

rynek produktów; modelowanie produkcji; planowanie procesów

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2010
• Tom: Vol. 1, No. 2
• Strony: 64--71
• Opis fizyczny: Bibliogr. 11 poz., rys., wykr.

Twórcy

autor

Chlebus E.

• Wrocław University of Technology, Institute of Production Engineering and Management, Centre for Advanced Manufacturing Technologies, ul. Łukasiewicza 5, 50-371 Wrocław, Poland, phone: [phone],

Bibliografia

• [1] Anderl R., Lise H., Oeser A., Neue Lehr- und Lehrformen fuer die virtuele Produktentwicklung, Industrie Management 16/2000.
• [2] Chlebus E., CAx computer techniques in production engineering, WNT Warsaw 2000 (in Polish).
• [3] Chlebus E., Rapid prototyping/rapid tooling techniques in product development, Printing House of Wroclaw University of Technology (PWr), Wroclaw 2003 (in Polish, in printing).
• [4] Czajka J., Design of manufacturing system topology on the ground of technological tasks, Doctor’s Thesis, Institute of Machine Engineering and Automation of PWr, Wroclaw 2003 (in Polish).
• [5] Eigner M., Requirements with regard to PDM system architecture and functionality - a vendors report, Proceedings of Product Data Management based on International Standards, 18 November Volkswagen AG, Braunschwaig 1999.
• [6] Gebhartd A., Rapid prototyping, M¨unchen-Wien, Carl Hanser Verlag, 1996.
• [7] Matuszek J., Kuric I., Debnar R., Computer Aided Process Planning, Printing House of Lodz Technical University, Division in Bielsko-Biala, Bielsko-Biala 1999.
• [8] N.N. Effezienzsteigerungen durch Wissensmanagement, ZWF 93 (1998), 9.
• [9] Oczoś K.E., Rapid Prototyping and Rapid Tooling - Development of methods and techniques of rapid manufacture of models, prototypes and small-series products, Mechanik, 4, 1998 (in Polish).
• [10] Redeker G., Sauer R., Continuous Engineering - Kontinuierliche Produktentwicklung nach dem Schichtprinzip, Industrie Management 16/2000, GITO Verlag.
• [11] Steinhilper R., Stender S., Product-Life-CycleManagement, Seminar: Produkte mit technischer Intelligenz entwickeln, herstellen und betreiben, Fraunhofer IPA Technologie-Forum F 42, 1 Juli ’99, Stuttgart 1999.