PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Distributed Manufacturing Control: Models and Software Implementations

Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
This paper describes two approaches to distributed control of discrete event manufacturing systems that have been developed at Cracow University of Technology. The first one applies Object Observable Petri Nets for modelling and analysis of manufacturing systems while the second one uses UML for system modelling and intelligent agents for design and implementation of control system. Software for distributed simulation and control have been developed for both concepts. This software have been tested in simulation environment and in laboratory test beds located in the Production Engineering Institute.
Twórcy
autor
autor
autor
  • Aleja Jana Pawła II 37, 31-864 Cracow, Poland, tel. +48 12 374-32-60, fax +48 12 374-32-02, zajac@mech.pk.edu.pl
Bibliografia
  • Babiceanu R., Chen F. (2006). Development and applications of holonic manufacturing systems: A survey. Journal of Intelligent Manufacturing, Vol. 17, No. 1, pp. 111-131.
  • Booch G., Rumbaugh J., Jacobson I. (1999). The Unified Modelling Language User Guide. Addison Wesley Longman.
  • Brauer W., Reisig W. (2006). Carl Adam Petri and “Petri Nets”. Informatik-Spektrum, Vol. 29, Nr. 5, pp. 369-374.
  • Chwajol G. (2006). Communication Technologies in Manufacturing Systems -The Current State and Directions of Development. Proc. of 8th International Conference ROBTEP 2006: Automation/Robotics in theory and practice, Jasná-Nízke Tatry, pp. 173-178.
  • Cyklis J., Słota A. (2000). FMS model based on Coloured Object Observable Petri Net. Proc. of the 11th International DAAAM Symposium, Opatia 2000, pp. 105-106.
  • Cyklis J., Słota A. (2002a). Hierarchical Coloured Object Observable Petri Net applied for FMS modelling. Proc. of the 13th International DAAAM Symposium, Vienna, pp. 119-120.
  • Cyklis J., Słota A. (2002b). FMS Control system based on the Coloured Object Observable Petri Net. New ways in manufacturing engineering, Preśov, pp. 290-293.
  • Cyklis J., Słota A. (2003). Procedure of model building for discrete manufacturing systems with the use of COPN. CIM2003. Wisła, pp. 122-127.
  • Cyklis J., Zając J. and Słota A. (2004), Models of manufacturing system for simulation and control. Journal of Manufacturing Engineering, pp. 10-15.
  • Dicesare F., Harhalakis G., Proth J.M., Silva M., Vernadat F.B. (1993). Practice of Petri Nets in Manufacturing. Chapman & Hall, London.
  • Goli A., Zileh Z. (2009). Application of Generalized Stochastic Petri Nets (GSPN) in modelling and valuating a resource sharing Flexible Manufacturing System. World Academy of Science, Engineering and Technology, Vol. 57, pp. 356-365.
  • Horvath L., Rudas I., Bencze J. (1997). Petri Net modelling of manufacturing processes for CAD/CAM and FMS applications. Proc. of the 23rd International Conference on Industrial Electronics, Control, and Instrumentation (IECON’97), Vol. 3, pp. 1216-1221.
  • Koren Y. (2006). General RMS Characteristics. Comparison with Dedicated and Flexible Systems, In: A. I. Dashchenko (ed.), Reconfigurable Manufacturing Systems and Transformable Factories, Berlin/Heidelberg, Springer Verlag: pp. 27-46.
  • Koren Y., Heisel U., Jovane F., Moriwaki T., Pritchow G., Ulsoy G., Van Brussel, H. (1999). Reconfigurable Manufacturing Systems. Annals of the CIRP, Vol. 48, No. 2, pp. 527-540.
  • Köhler H., Nickel U., Niere J., Zündorf, A. (2000). Integrating UML Diagrams for Production Control Systems; Proc. of ICSE 2000 - The 22 nd International Conference on Software Engineering, Limerick, Ireland, pp. 241-251.
  • Leitao P. (2009). Agent-based distributed manufacturing control: A state-of-the-art survey. Engineering Applications of Artificial Intelligence, Vol. 22, No. 7, pp. 979-991.
  • Mehrabi M.G., Ulsoy A.G., Koren Y. (2000). Reconfigurable Manufacturing System and Their Enabling Technologies, International Journal of Manufacturing Technology and Management, Vol. 1, No. 1, pp. 113-130.
  • Moore K. E., Gupta S.M. (1995). Stochastic colored Petri Net models of Flexible Manufacturing Systems: material handling systems and machining. Computers and Industrial Engineering, Vol. 29, No. 1-4, pp. 333-337.
  • Murata T. (1989). Petri Nets: properties, analysis and applications. Proc. of IEEE, Vol. 77, No. 4., pp. 541-580.
  • Odell J., Parunak H.V.D., Bauer B. (2000). Representing Agent Interaction Protocols in UML. Proc. of the First International Workshop (AOSE-2000). Springer-Verlag: Berlin, pp. 121-140.
  • Parunak H.V.D. (2000). A Practitioners’ Review of Industrial Agent Applications. Autonomous Agents and Multi-Agent Systems, Vol. 3(4), pp. 389-407.
  • Shen W., Hao Q., Yoon H.J., Norrie, D.H. (2006). Applications of agent-based systems in intelligent manufacturing: An updated review. Advanced Engineering Informatics, Vol. 20, pp. 415-431.
  • Słota A. (2005). Petri Net model of Flexible Assembly Systems for distributed control. Advances in Manufacturing Science and Technology, Vol. 29, No. 4, pp. 91-98.
  • Valette R. (1997). Some issues about Petri Net application to manufacturing and process supervisory control, Lecture Notes In Computer Science, Vol. 1248. Proc. of the 18th International Conference on Application and theory of Petri Nets, pp. 23-41.
  • Van Brussel H. (1994). Holonic Manufacturing Systems, the Vision Matching the Problem. Proc. of the 1st European Conf. on Holonic Manufacturing Systems, IFW Hannover.
  • Van Brussel H., Wyns J., Valckenaers P., Bongaerts L., Peeters P. (1998). Reference Architecture for Holonic Manufacturing Systems: PROSA. Computers in Industry, Vol. 37, No. 3, pp. 255-274.
  • Van der Aalst, W.M.P (1998), The Application of Petri Nets to Workflow Management. The Journal of Circuits, Systems and Computers, Vol. 8, No. 1, pp. 21-66.
  • Zając J. (1998). Interobject Communication in Distributed Manufacturing Using COM Technologies., Proc. of 9th International DAAAM Symposium: Intelligent Manufacturing, Automation & Networking, Cluj-Napoca 1998, pp. 513-514.
  • Zając J. (2003). Distributed Control of Automated Manufacturing Systems. (in Polish). Monografia 288, Seria Mechanika. Wydawnictwo Politechniki Krakowskiej, Kraków 2003.
  • Zając, J. (2004). A Deadlock Handling Method for Automated Manufacturing Systems. CIRP Annals - Manufacturing Technology, Vol. 53, No. 1, pp. 367-370.
  • Zając J., Chwajol G. (2007). Entitlement Based Approach to Decision Making in Distributed Manufacturing Control Systems. Proc. of Technology Systems Operation, Prešov, pp. 167-170.
  • Zając J., Chwajol G. (2008). Towards Agent-Based Manufacturing Systems. Annals of DAAAM for 2008 & Proc. of the 19th International DAAAM Symposium. DAAAM International, Vienna, pp. 1541-1542.
  • Zurawski R., Zhou M.C. (1994). Petri Nets and Industrial Applications: A Tutorial. IEEE Transactions on Industrial Electronics, Vol. 41, No. 6, pp. 576-583.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAR0-0065-0012
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.