Comparison of the Methods for Parameters Significance Evaluation on the Basis of Roller Burnishing Process

• Autorzy: Pacana A. , Sęp J. , Stadnicka D.
• Języki publikacji: EN

Abstrakty

EN

In the work the chosen methods for evaluation of a significance of controllable parameters in technological process results are compared. The task was realized on the basis of roller burnishing process of turned shaft made of 1.503 steel. The methods, which are compared are: a 23 full factorial design and a Shainin method. Considered controllable parameters were: rate of feed, force of roller pressure and spindle rotation speed. Experiments conducted to minimize roughness (Ra parameter) after treatment, in case of the 23 full factorial design, enable to obtain a formula after relatively labor-intensive calculations. In case of the Shainin method it was possible to obtain faster approximate results comparable with these obtained using the 23 full factorial design.

Słowa kluczowe

EN

experiment planning; Shainin method; full factorial design

PL

planowanie eksperymentu; metody Shainina; proces nagniatania

• Wydawca: Production Engineering Committee of the Polish Academy of Sciences ; Polish Association for Production Management
• Czasopismo: Management and Production Engineering Review
• Rocznik: 2010
• Tom: Vol. 1, No. 1
• Strony: 17--22
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Pacana A.

autor

Sęp J.

autor

Stadnicka D.

• Department of Manufacturing Processes and Production Organization Rzeszow University of Technology, ul. W. Pola 2, 35-959 Rzeszow, Poland, tel. [phone],

Bibliografia

• Anderson M. J., Whitcomb P.J. (2000). DOE simplified: practical tools for effective experimentation. Productivity Press, New York.
• El-Tayeb N.S.M, Low K.O., Breven P.V. (2009). On the surface and tribological characteristics of burnished cylindrical A-6061. Tribology International, Vol. 42, pp. 320-329.
• Gryna F. M., Chua R., DeFeo J.A. (2007). Juran’s Quality Planning and Analysis. McGraw - Hill International Edition.
• Hamadache H., Laouar L., Zeghib N.E., Chaoui K. (2006). Characteristics of Rb40 Steel superficial layer under ball and roller burnishing. Journal of Materials Processing Technology, Vol. 180, pp. 130-139.
• Hamrol A. (2008). Quality management with examples. PWN, Warsaw (original title in Polish: Zarządzanie Jakością z przykładami).
• Jiju A. (1999). Improving the wire bonding process quality using statistically designed experiments. Microelectronics Journal, Vol. 30, pp. 161-168.
• Jiju A., Ho Yuen Cheng A. (2003). Training for Shainin’s approach to experimental design using a catapult. Journal of European Industrial Training, Vol. 8 (27), pp. 404-412.
• Korzyński M. (2006). Experiment’s methodology. WNT, Warsaw (original title in Polish: Metodyka eksperymentu).
• Tanco M., Viles E., Pozueta L. (2008). Are all designs of experiments approaches suitable for your company? Proceedings or the World Congress on Engineering, Vol. II, July 2-4.
• Thomas A., Jiju A. (2004). Applying Shainin’s variables search methodology in aerospace applications. Assembly Automation, Vol. 24, pp. 184-191.
• Thomas A., Jiju A. (2006). A comparative analysis of the Taguchi and Shainin DOE techniques in an aerospace environment. International Journal of Productivity and Performance Management, Vol. 8, pp. 658-678.