Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Influence of heteroatom containing plastics on yield and properties of polyolefin cracking products
Języki publikacji
Abstrakty
W pracy przeanalizowano wpływ potencjalnych zanieczyszczeń surowca dla instalacji krakingu odpadowych poliolefinowych tworzyw sztucznych na przebieg procesu oraz wydajność i właściwości fizykochemiczne produktu. Ustalono wpływ obecności powszechnie stosowanych tworzyw sztucznych zawierających azot (poliamidy), chlor (PVC) i tlen (PET) oraz mieszaniny tych polimerów z celulozą. Stwierdzono, że obecność wymienionych materiałów niekorzystnie wpływa na proces i jego produkty. Wzrasta wydajność koksu, spada wydajność i pogarszają się niskotemperaturowe właściwości głównego produktu procesu. Ponadto produkt ten zawiera chlorowe, azotowe lub/i tlenowe związki organiczne.
The influence of the waste polyolefin contamination on the catalytic cracking process, yield and physicochemical properties of the products was analyzed. The incidence of the common plastics containing nitrogen, chlorine and oxygen or cellulose in the reaction environment was examined and found disadvantageous. It causes coke yield increasing and liquid product yield decreasing. The low-temperature properties of the liquid hydrocarbon fraction are worse and it contains heteroatom organic compounds.
Czasopismo
Rocznik
Tom
Strony
209--221
Opis fizyczny
Bibliogr. 18 poz., rys., tab.
Twórcy
autor
autor
- Ośrodek Badawczo-Rozwojowy Przemysłu Rafineryjnego, Płock
Bibliografia
- 1. Shabtai J., Xiao X., Zmierczak W.: Depolymerization1liquefaction of plastics and rubbers. 1. Polyethylene, polypropylene, and polybutadiene. Energy & Fuels 1997, vol. 11, s. 76-87.
- 2. Aguado J., Sotelo J.L., Serrano D.P., Calles J. A., Escola J. M.: Catalytic conversion of polyolefins into liquid fuels over MCM41: comparison with ZSM-5 and amorphous SiO2Al2O3. Energy &Fuels 1997, vol. 11, s. 1225–1231.
- 3. Ng S. H.: Conversion of polyethylene blended with VGO to transportation fuels by catalitic cracking. Energy & Fuels 1995, vol. 9, s. 216–224.
- 4. De la Puente G., Klocker C., Sedran U.: Conversion of waste plastics into fuels. Recycling polyethylene in FCC. Appl. Catal. B: Environ. 2002, vol. 36, s. 279–285.
- 5. Arandes J.M., Erena J., Azkoiti M.J., López-Valerio D., Bilbao J.: Valorization by thermal cracking over silica of polyolefins dissolved in LCO. Fuel Proc. Techn. 2003, vol. 85, s. 125–140.
- 6. Arandes J.M., Erena J., López-Valerio D., Bilbao J., De la Puente G.: Valorization of polyolefins dissolved in light cycle oil over HY zeolites under fluid catalytic cracking unit conditions. Ind. Eng. Chem. Res. 2003, vol. 42, s. 3952–3961.
- 7. Czegeny Z., Blazsó M.: Thermal decomposition of polyamides in the presence of poly(vinyl chloride). J. Anal. Appl. Pyr. 2001, vol. 5859, s. 95–104.
- 8. Ohtani H., Nagaya T., Sugimura Y., Tsuge S.: Particle size limitations due to heat transfer in determining pyrolysis kinetics of biomass. J. Anal. Appl. Pyr. 1982, vol. 4, s. 117–127.
- 9. Leichtnam J.N., Schwartz D., Gadiou R.: The behaviour of fuelnitrogen during fast pyrolysis of polyamide at high temperature. J. Anal. Appl. Pyr. 2000, vol. 55, s. 255–268.
- 10. Chatterjee N., Basu S., Palit S.K., Maiti M.M.: A reexamination of the degradation of poly(vinylchloride) by thermal analysis. J. Polym. Sci. A: Polym. Chem. 1994, vol. 32, s. 1225–1236.
- 11. Bockhorn H., Hornung A., Hornung U., Jakobstroer P., Kraus M.: Dehydrochlorination of plastic mixtures. J. Anal. Appl. Pyr. 1999, vol. 49, s. 97–106.
- 12. Bockhorn H., Hornung A., Hornung U.: Stepwise pyrolysis for raw material recovery from plastic waste. J. Anal. Appl. Pyr. 1998, vol. 46, 1–13.
- 13. Marcilla A., Gómez A., Berenguer D., Agulló J., Menargues S.: MS study of the gases evolved in the pyrolysis of ethylenevinyl acetate copolymers comparison between thermal and catalytic processes. J. Anal. Appl. Pyr. 2005, vol. 74, 393–400.
- 14. Garcia A.N., Font R.: Thermogravimetric kinetic model of pyrolysis and combustion of an ethylene-vinyl acetate copolymer refuse. Fuel 2004, vol. 83, s. 1165–1173.
- 15. Sivalingam G., Karthik R., Madras G.: Effect of metal oxides on thermal degradation of poly(vinyl acetate) and poly(vinyl chloride) and their blends. Ind. Eng. Chem. Res. 2003, vol. 42, s. 3647–3653.
- 16. Kulesza K., German K.: Chlorinated pyrolysis products of co-pyrolysis of poly(vinyl chloride) and poly(ethylene terephtalate). J. Anal. Appl. Pyr. 2003, vol. 67, s. 123–134.
- 17. Barriocanal C., Diez M.A., Alvarez R., PET recycling for the modification of precursors in carbon materials manufacture. J. Anal. Appl. Pyr. 2005, vol. 73, s. 45–51.
- 18. Brebu M., Bhaskar T., Murai K., Muto A., Sakata Y., Uddin M.A.: The effect of PVC and/or PET on thermal degradation of polymer mixtures containing brominated ABS. Fuel 2004, vol. 83, s. 2021–2028.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAR0-0033-0042