PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wpływ mimośrodowego przemieszczenia wału względem korpusu na wymuszenia aerodynamiczne generowane w uszczelnieniu nadbandażowym wirnika turbinowego. Cz. 3: Siły i momenty

Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
The influence of rotor speed on the aerodynamic forces generated in the shroud clearance of a turbine stage Part 3: Aerodynamic forces and moments
Języki publikacji
PL
Abstrakty
PL
Zagadnienia poruszone w pracy dotyczą badań eksperymentalnych wymuszeń aerodynamicznych generowanych w uszczelnieniach nadbandażowych stopni turbinowych. W pierwszej części referatu opisano stanowisko doświadczalne, a w drugiej przedstawiono pomierzone rozkłady ciśnień w uszczelnieniu nadbandażowym stopnia turbiny modelowej. W części 3 przedstawiono zagadnienie wpływu mimośrodowego przemieszczenia osi wirnika względem osi korpusu na siły ciśnieniowe i pochodzące od nich momenty, które działają na wirnik turbinowy i mogą prowadzić o drgań samowzbudnych typu aerodynamicznego.
EN
The experimental investigations into the forces and moments generated in the shroud clearance were performed on a one-stage air model turbine of impulse type. Basing on the pressure distribution, the aerodynamic forces and moments were calculated as a function the rotor eccentricity. The results show the influence of the rotor-stator eccentricity on the aerodynamic forces and moments generated in shroud clearances. Although the axial component of the pressure force is relatively low, the moments exerted by this force should be take into account when total aerodynamic moments are determined.
Czasopismo
Rocznik
Tom
Strony
70--74
Opis fizyczny
Bibliogr. 12 poz., rys.
Twórcy
autor
  • Politechnika Gdańska, Wydział Oceanotechniki i Okrętownictwa, ul. Narutowicza 11/12, 80-952 Gdańsk
  • Politechnika Gdańska, Wydział Oceanotechniki i Okrętownictwa, ul. Narutowicza 11/12, 80-952 Gdańsk
Bibliografia
  • [1] Baskharone E. A., Hensel S. J. „A FiniteElement Perturbation Approach to Fluid/Rotor Ineteraction in Turbomachinery Elements. Part 1: Theory” Part 2: Application” Transactions of the ASME Journal of Fluids Engineering September 1991, Vol. 113.
  • [2] Childs D. W. „Finite-length Solutions for Rotordynamic Coefficients of Turbulent Annular Seals” Transactions of the ASME Journal of Lubrication Technology July 1983, Vol. 105.
  • [3] Childs D. W., Scharrer J. K. „Theory Versus Experiment for the Rotordynamic Coefficient of Labyrinth Gas Seals: Part II-A Comparison to Experiment” Transactions of the ASME Journal of Vibration, Acoustic, Stress, and Reliability in Design July 1988, Vol. 110.
  • [4] Darden M. J., Earhart E. M, Flowers G. T. „Experimental Rotordynamic Characterization of Annular Seals: Facility and Methodology” Transactions of the ASME Journal of Engineering for Gas Turbines and Power, April 1999.
  • [5] Dietzen F. J., Nordmann R. „Calculating Rotordynamic Coefficients of Seals by Finite Difference Techniques” Transactions of the ASME Journal of Turbomachinery July 1987, Vol. 109.
  • [6] Kanemori Y., Iwatsubo T. „Experimental Study of Dynamic Fluid Forces and Moments for a Long Annular Seal” Transactions of the ASME Journal of Tribology October 1992, Vol. 114.
  • [7] Kanemori Y., Iwatsubo T. „Forces and Moments Due to Combined Motion of Conical and Cylindrical Whirls for a Long Seal” Transactions of the ASME Journal of Tribology July 1994, Vol. 116.
  • [8] Nelson C. C., Nquyen D. T. „Analysis of Eccentric Annular Seals: Part 1-A New Solution Using Fast Fourier Transforms for Determining Hydrodynamic Force” Transactions of the ASME Journal of Tribology April 1988, Vol. 110.
  • [9] Marquette O. R., Childs D. W. „An Extended Three - Control - Volume Theory for Circumferentially - Grooved Liquid Seals” Transactions of the ASME Journal of Tribology April 1996, Vol. 118.
  • [10] Marquette O. R., Childs D. W., San Andres L. „Eccentricity Effects on the Rotordynamic Coefficients of Plain Annular Seals: Theory Versus Experiment” Transactions of the ASME Journal of Tribology July 1997, Vol. 119.
  • [11] Nelson C. C., Nquyen D. T. „Analysis of Eccentric Annular Seals: Part 2-Effects of Eccentricity on Rotordynamic Coefficients” Transactions of the ASME Journal of Tribology April 1988, Vol. 110.
  • [12] Simon F., Frěne J. „Analysis for Incompressible Flow in Pressure Seal” Transactions of the ASME Journal of Tribology July 1992, Vol. 114.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAR0-0017-0029
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.