PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Space and time distribution of magnetic field in 2D magnetizers

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Rozkład pola magnetycznego w czasie i w przestrzeni przy magnesowaniu dwuosiowym
Konferencja
8th International Workshop on 1&2-Dimensional Magnetic Measurement and Testing, Ghent, Belgium, 27-28 September 2004
Języki publikacji
EN
Abstrakty
EN
Different setups for two-dimensional excitation of soft magnetic laminations are investigated by means of a finite element procedure. For any envisaged configuration, the space-time distribution of the generated field is determined and the ensuing 2D magnetic flux behavior in the test lamination, assumed isotropic, is calculated. Two-phase and three-phase supply systems provide similar outcomes in square and circular/hexagonal samples, respectively. However, the latter geometry leads to the highest homogeneity of the induction in the test specimen.
PL
Zbadano metodą elementu skończonego różne rodzaje układów magnesowania przy wymuszeniu dwuwymiarowym. W każdym przypadku analizowano pole magnetyczne zmienne w czasie i w dwuwymiarowej przestrzeni uwzględniając laminację. Dwufazowe i trójfazowe wymuszenie generuje podobne pole w próbkach kwadratowych, kołowych i sześciokątnych. Najlepszą jednorodność namagnesowania zaobserwowano w próbce sześciokątnej.
Rocznik
Strony
8--12
Opis fizyczny
Bibliogr. 10 poz., rys.
Twórcy
  • Instituto Elettrotecnico Nazionale Galileo Ferraris, Torino, Italy; Dipartimento di Energia Elettrica del Politecnico, Torino, Italy
autor
  • Politecnico di Torino, Dipartimento di Ingegneria Elettrica, Corso Duca degli Abruzzi 24, I-10129 Torino, Italy
autor
  • Istituto Elettrotecnico Nazionale Galileo Ferraris, Strada delle Cacce 91, 10135 Torino, Italy
autor
  • Istituto Elettrotecnico Nazionale Galileo Ferraris, Strada delle Cacce 91, 10135 Torino, Italy
Bibliografia
  • [1] Sievert J., On measuring the magnetic properties of electrical sheet steel under rotational magnetization, J. Magn. Magn. Mater., 112 (1992), 50–57.
  • [2] Enokizono M, Sievert J., Magnetic field and loss analysis in an apparatus for the determination of rotational loss, Phys. Scripta, 39 (1989), 356-359.
  • [3] Nencib N., Kedous-Lebouc A., Cornut B., 2D analysis of rotational loss tester, IEEE Trans. Magn. 31 (1995), 3388-3390.
  • [4] Makaveev D., De Wulf M., Gyselink J., Maes J. Dupré L., Melkebeek J., Measurement system for 2D magnetic properties of electrical steel sheets: design and performance, Proc. 1&2 Dimensional Magnetic Measurement and Testing Workshop (Badgastein, H. Pfützner, ed., 2001), pp. 48-55.
  • [5] Tumanski S., Which magnetizing circuit is suitable for twodimensional measurements?, PTB Bericht, PTB-E-81 (2002), 81-87.
  • [6] Sievert J., et al., European intercomparison of measurements of rotational power loss in electrical sheet steel, J. Magn. Magn. Mater., 160 (1996), 115–118.
  • [7] Xu J, Sievert J., On the reproducibility, standardization aspects and error sources of the fieldmetric method for the determination of 2D magnetic properties of electrical sheet steel, Proc. 5th Int. Workshop on Two-dimensional Magnetization Problems (Grenoble, A. Kedous-Lebouc, ed., 1997), pp. 43-54.
  • [8] A. Hasenzagl, B. Weiser, H. Pfützner, Novel 3-phase excited single sheet tester for rotational magnetization. J. Magn. Magn. Mater., 160 (1996), 180-182.
  • [9] Chiampi M., Negro A., Tartaglia M., A Finite Element Method to compute three-dimensional magnetic field distribution in transformer cores, IEEE Trans. Magn., 16 (1980), 1413-1419.
  • [10] Bottauscio O., Chiampi M., Laminated core modelling under rotational excitations including eddy currents and hysteresis, J. of Applied Phys., 89 (2001), 6728-6730.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-BAR0-0008-0041
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.