PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Development of a new semi-active friction damper using piezoelectric technology for the anti-seismic control of civil structures

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Nowy semiaktywny tłumik piezoelektryczny do tłumienia drgań sejsmicznych budowli
Języki publikacji
EN
Abstrakty
EN
This work presents a new semi-active friction damper, based on the piezoelectric technology, for the anti-seismic control of a civil structure. The device has been conceived and designed at D.I.A.S. (Department of Aerospace Engineering) of University Federico II of Naples. It belongs to the family of the semi-active technologies of structural control for a civil structure. Damper is based on an external cylinder and an internal hollow piston that slips inside the cylinder. Device presents an original conceptual lay-out, developed at D.I.A.S and it is independent by any scheme, available in literature.
PL
W pracy przedstawiono nowy semiaktywny tłumik cierny wykorzystujący elementy piezoelektryczne. Tłumik jest przeznaczony do zabezpieczenia budowli przed zjawiskami sejsmicznymi. Konstrukcja tłumika powstała w D.I.A.S na Uniwersytecie Federico II w Neapolu. Tłumik składa się z zewnętrznego cylindra i specjalnie skonstruowanego tłoka. Urządzenie zawiera całkowicie oryginalną koncepcję wykorzystania elementów piezoelektrycznych rozwijaną w D.I.A.S. Różni się ona od wcześniej opublikowanych rozwiązań w tej dziedzinie.
Rocznik
Strony
1--5
Opis fizyczny
Bibliogr. 14 poz., rys., wykr., tab.
Twórcy
autor
autor
autor
autor
Bibliografia
  • Condor J. 2000, Introduction to structural motion control, Prentice Hall.
  • Chen G.D., Chen C.C. 2000, Behavior of piezoelectric friction dampers under dynamic loading, In Liu Sc (ed.), Smart Structures and Highways 2000: Smart Systems for Bridges, Structures, and Highways. Proc. of SP1E 3988, pp. 54-63.
  • Chen G.D., Chen C.C. 2002, Building hazard mitigation with piezoelectric friction dampers, Proc. of the International Conference on Advances in Building Technology, Hong Kong, 1, pp. 465-472.
  • Chen G.D., Chen C.C. 2004, Semi-active control of the 20-storey benchmark building with piezoelectric friction dampers, ASCE Journal of Engineering Mechanics, 130(4), pp. 393^K)0C.
  • Chaoqiang Chen, Genda Chen 2004, Shake table tests of a quarter-scale three-storey building model with piezoelectric friction dampers, Struct. Control Health Monit, 11, pp. 239-257.
  • Chen G.D., Garrett G.T., Chen C.C, Cheng F.Y. 2004, Piezoelectric friction dampers for earthquake mitigation of buildings: design, fabrication, and characterization, Structural Engineering and Mechanics, 17(3^t), pp. 539-556.
  • Durmaz O., Clark W.W., Bennett D.S., Paine J.S., Samuelson M.N. 2003, Analysis of a novel piezoelectric Coulomb damper, IEEE/ ASME Transactions on Mechatronics (provisionally accepted for publication).
  • Feng M.Q. 1993, Application of hybrid sliding isolation system to buildings, Journal of Engineering Mechanics, 119(10), pp. 2090-108.
  • Feng M.Q., Shinozuka M., Fujii S. 1993, Friction controllable sliding isolation system, Journal of Engineering Mechanics, 119(9), pp. 1845-64.
  • Fujii S., Feng Q. 1992, Hybrid isolation system using friction-controllable sliding bearings - part 2: shaking table test, Proc. of Tenth World Conference on Earthquake Engineering, Balkema, Rotterdam, pp. 2417-20.
  • Pandya J., Akbay Z., Uras M., Aktan H. 1996, Experimental implementation of hybrid control, Proc. of Structures Congress XIV, Chicago, IL, pp. 1172-9.
  • Pecora R., Franco F., Lecce L. 2008, Rapporto tecnico A3.S.2.: Telai in acciaio: modelli dinamici numerici e correlazione numerico/ sperimentale, Progetto Tellus Stabilita, www.tellusstabilita.it, 30/3/2008.
  • Soong T.T., Spencer Jr, B.F. 2002, Supplemental energy dissipation: state-of-the-art and state-of-the practice. Engineering Structures 24, pp. 243-259.
  • Symans M.D., Constantinou M.C. 1999, Semi-active control systems for seismic protection of structures: a state-of-the-art review. Engineering Structures 21, pp. 469-487.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGHS-0006-0001
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.