PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Tack as an undefined very important property of pressure-sensitive adhesives

Treść / Zawartość
Identyfikatory
Warianty tytułu
PL
Tack jako niezdefiniowana bardzo istotna właściwość klejów samoprzylepnych
Języki publikacji
EN
Abstrakty
EN
The term pressure-sensitive adhesive (PSA) has a very precise technical definition and was dealt with extensively in the chemical literature. The function of PSAs is to ensure instantaneous adhesion upon application of a light pressure. Fundamentally, characteristics of PSA are categorized by tack, peel adhesion and cohesive strength. Tack is the dominant property of PSA, and is defined as the ability of an adhesive to form a bond of measurable strength to another surface under conditions of low contact pressure and short contact time. Most applications further require that they can be easily removed from the surface to which they were applied, through a light pulling force. The bonding and the debonding of PSA are energy driven phenomena. Pressure-sensitive adhesives must possess viscous properties in order to flow and to be able to dissipate energy during the adhesive bonding process. To determine the tack property, various testing methods are suggested, for example, rolling ball tack test, probe tack test, quick stick, and loop tack method.
PL
Pojęcie tack (lepność) klejów samoprzylepnych jest wprawdzie precyzyjnie określone w literaturze, ale jest nie do końca jednoznacznie zdefiniowaną właściwością. Zasadniczo, kleje samoprzylepne są scharakteryzowane poprzez tack, adhezję przy odrywaniu oraz kohezję pod ściśle określonym obciążeniem. Tack jest dominującą właściwością klejów samoprzylepnych i jest określany jako zdolność warstwy samoprzylepnej kleju do utworzenia wiązania adhezyjnego w bardzo krótkim czasie kontaktu powierzchni kleju z substratem, bez nacisku zewnętrznego na sklejaną powierzchnię. W czasie pomiaru tacku dochodzi de facto do bardzo niewielkiego nacisku na substrat, wywołanego naciskiem, naniesionej z reguły na nośnik, warstwy samoprzylepnej kleju. Kleje samoprzylepne charakteryzują się doskonałymi właściwościami lepkosprężystymi, umożliwiającymi doskonałą zwilżalność sklejanych powierzchni. Pomiaru tacku dokonuje się za pomocą czterech metod: metodą toczącej się kuli, metodą próbnika, metodą odrywania (quick stick) oraz metodą pętli (loop tack).
Twórcy
autor
autor
autor
autor
autor
  • Institute of Chemical Organic Technology, West Pomeranian University of Technology, Szczecin, Poland
Bibliografia
  • [1] Benedek I., Developments in Pressure-Sensitive Products, Ed. by Istvan Benedek, Taylor & Francis a CRC Press Book, New York (2006).
  • [2] Głuch U., Czech Z., Investigating methods of self-adhesive hydrogels, Aparatura Badawcza i Dydaktyczna 4 (2010) pp. 19-23.
  • [3] Czech Z., Butwin A., Głuch U., Madejska E., Pressure-Sensitive Adhesives (PSAs) Coating 10 (2010) pp. 34-38.
  • [4] Madejska E., Czech Z., Testing methods of water-dispersible PSA materials for splicing of paper, Aparatura Badawcza i Dydaktyczna 4 (2010) pp. 25-29.
  • [5] Czech Z., Vernetzung von Haftklebstoffen auf Polyacrylatbasis, Ed. by Technical University of Szczecin (1999).
  • [6] Woo Y., Dissertation Inelastic analysis of the loop tack test for pressure sensitive adhesives, September (2002), Blacksburg, Virginia, USA.
  • [7] Benedek I., General Performance of Pressure-Sensitive Adhesives in Pressure-Sensitive Design. Theoretical Aspects Volume 1, VSP. Leiden, Boston (2006) pp. 291-317.
  • [8] ASTM D 2979. Test Method for Pressure Sensitive Tack of Adhesive Using an Inverted Probe Machine. Annual Book of Standards Vol. 15 (1983).
  • [9] Zosel A., Journal of Adhesion, 11 (1997) pp. 1447-1457.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGHM-0047-0001
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.