Tytuł artykułu
Autorzy
Identyfikatory
Warianty tytułu
Zastosowanie termografii impulsowej do wykrywania i ilościowej charakterystyki defektów podpowierzchniowych w stali austenitycznej
Konferencja
Odkształcalność metali i stopów : VIII konferencja naukowa : 24-27 listopada 2009
Języki publikacji
Abstrakty
Pulsed IR thermography is a non-destructive method that allows detection of subsurface defects in material. In this method the surface of the tested specimen is stimulated by heat pulse and its self-cooling process is analyzed. The temperature decrease rate is different for surface over defect with comparison to that over the sound material. It is caused by difference between values of heat diffusivity of defected zone and sound one. The purpose of this work is to determine the size and depth of the defects in austenitic steel on the basis of thermal contrast analysis. Because the thermal contrast is dependent on both these parameters, two independent experimental methods of defect size and depth determination were proposed.
Termografia impulsowa jest nieniszczącą metodą badań, stosowaną do wykrywania defektów w warstwie podpowierzchniowej materiału. Polega ona na analizie rozkładu temperatury na powierzchni badanego materiału podczas jej stygnięcia po nagrzaniu impulsem cieplnym. Szybkość stygnięcia obszaru powierzchni nad defektem jest różna w porównaniu z szybkością stygnięcia powierzchni materiału jednorodnego. Jest to spowodowane różnicą pomiędzy wartościami dyfuzyjności cieplnej wymienionych obszarów. Celem pracy jest oszacowanie wielkości i głębokości defektu w stali austenitycznej na podstawie analizy kontrastu termicznego. Kontrast termiczny zależy od tych dwóch parametrów, dlatego w pracy zaproponowano dwie niezależne metody eksperymentalne ich szacowania.
Wydawca
Czasopismo
Rocznik
Tom
Strony
684--687
Opis fizyczny
Bibliogr. 8 poz., rys., tab., wykr.
Twórcy
autor
autor
autor
- Instytut Podstawowych Problemów Techniki Polskiej Akademii Nauk, Warszawa
Bibliografia
- 1. Deemer C., Sun J. G., Ellington W. A., Short S.: Front-Flash Thermal Imaging Characterization of Continuous Fiber Composites. Osti, 1999, ANL/ET/CP-97040, p. 1-7.
- 2. Favro H. X., Han X., Wang Y., Kou P. K., Thomas R. L.: Pulse-Echo Thermal Wave Imaging. Review of Progress in QNDE, 1995, Vol. 14, Plenum Press, p. 425-430.
- 3. Hanzah A. R., Delpech P., Saintey M. B., Almond D. P.: The Experimental Investigation of Defect Sizing by Transient Thermography. Insight, 1996, Vol. 38, No. 3, p. 167-171.
- 4. Lugin S., Netzelmann U.: A Defect Shape Reconstruction Algorithm for Pulse Thermography. Nondestructive Testing & Evaluation International, 2007, Vol. 40, p. 220-228.
- 5. Maldague X. P. V.: Theory and Practice of Infrared Thermography for Nondestructive Testing. Willey-Interscience, 2001, p. 198-199.
- 6. Oliferuk W., Płochocki Z., Wysocka O.: Pulsed Thermography with Finite Duration of Stimulating Heat Impulse. [in the preparation].
- 7. Sun J. G.: Analysis of Pulsed Thermography Methods for Depth Prediction. Journal of Heat Transfer, 2006, Vol. 128, p. 329-338.
- 8. Vavilov V. P., Ahmed T, Jin H. J., Favro L. R., Thomas L. D.: Experimental Thermal Tomography of Solids by Using the Pulse One-Side Heating. Soviet Journal of Nondestructive Testing, 1990, Vol. 12, p. 60-66.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGHM-0010-0004