Repeatability of sol-gel biocoatings on optical fibers examined by statistical pattern recognition methodology

• Autorzy: Bauer J. , Podbielska H. , Ulatowska-Jarża A. , Holowacz I. , Müller G. , Beuthan J.
• Języki publikacji: EN

Słowa kluczowe

EN

biocoatings; sol-gel method; optical fibers; linear discriminant analysis

• Wydawca: Polskie Stowarzyszenie Biomateriałów
• Czasopismo: Inżynieria Biomateriałów
• Rocznik: 2005
• Tom: R. 8, nr 47-53
• Strony: 227--228
• Opis fizyczny: Bibliogr. 15 poz., rys.

Twórcy

autor

Bauer J.

• Bio-Optics Group, Institute of Physics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wrocław, Poland

autor

Podbielska H.

• Bio-Optics Group, Institute of Physics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wrocław, Poland

autor

Ulatowska-Jarża A.

• Bio-Optics Group, Institute of Physics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wrocław, Poland

autor

Holowacz I.

• Bio-Optics Group, Institute of Physics, Wroclaw University of Technology, Wybrzeze Wyspianskiego 27, 50-370 Wrocław, Poland

autor

Müller G.

• Charite Universitätsmedizin Berlin, Campus Benjamin Franklin, Institut für Medizinische Physik und Lasermedizin, Fabeckstr. 60-62, D-14195 Berlin, Germany

autor

Beuthan J.

• Charite Universitätsmedizin Berlin, Campus Benjamin Franklin, Institut für Medizinische Physik und Lasermedizin, Fabeckstr. 60-62, D-14195 Berlin, Germany

Bibliografia

• [1] B. Surowska, J, Bienia., M. Walczak, K. Sangwal, A. Stoch: Microstructure and mechanical properties of ceramic coatings on Ti and Ti-based alloy, Applied Surface Science 238, 288-294, (2004).
• [2] Y. Xie, H.M. Hawthorne: Measuring the adhesion of sol-gel derived coatings to a ductile substrate by an indentation-based method, Surface and Coatings Technology 172, 42-50, (2003).
• [3] W. Que, X. Hu: Optical and mechanical propeties of sol-gel silica- titania hard optical coatings derived from methyltrimethoxysilane and tetrapropylorthotitanate as precursors, Optical Materials 22, 31-37, (2003).
• [4] M. Lechna, I. Hołowacz,, A. Ulatowska, H. Podbielska, Optical properties of sol-gel coating for fiberoptic sensors, J. Surface and Coatings Technology, vol.151-152, pp.299-302, (2002).
• [5] M.J.Paterson, B. Ben-Nissan: Multilayer sol-gel zirconia coatings on 316 stainless steel, Surface and Coatings Technology 86-87, 153-158, (1996).
• [6] D-M. Liu, Q. Yang, T. Troczynski: Sol-gel hydroxyapatite coatings on stainless steel substrates, Biomaterials 23, 691-698, (2002).
• [7] W. Que, Z. Sun, Y. Zhou, Y.L. Lam, S.D. Cheng, Y.C. Chan, C.H. Kam: Preparation of hard optical coatings based on an organic/ inorganic composite by sol-gel method, Materials Letters 42, 326-330, (2000).
• [8] S. Sakka, H. Kozuka: Sol-gel preparation of coating films containing noble metal colloids, J. Sol-Gel Sci. Technol. 13, 701-705, (1998).
• [9] C. Garcia, P. Galliano, S. Cere: Elecrochemical evaluation of resistance to localised corrosion of vitreous coatings containing particles applied on metalic substrates for biomedical applications, Materials Letters 57, 1810-1814, (2003).
• [10] J-X. Liu, D-Z. Yang, F. Shi, Y-J. Cai: Sol-gel deposited TiO2 film on NiTi surgical alloy for biocompatybility improvement, Thin Solid Films 429, 225-230, (2003).
• [11] T. Olding, M. Sayer, D. Barrow: Ceramic sol-gel composite coatings for elecrical insulation, Thin Solid Films 398-399, 581- 586, (2001).
• [12] H. Podbielska, A. Ulatowska-Jarza, I. Holowacz, Sol-gel applicators for medical light therapy, Physica Medica, Vol. XX, Supplement 1, 2004, 43-45.
• [13] E. Rohde, I. Mesecke von Rheinbaben, H. Podbielska, M. Hopf, G. Mueller: Interstitial Laser-Induced Thermotheraphy (LITT): Comparison of in-vitro irradiation effects of Nd:YAG (1064nm) and diode (940nm) laser, Med. Laser Appl. 16, (2001) 81-90.
• [14] K. Fukunaga: Introduction to Statistical Pattern Recognition, 2nd edition Academic Press, New York, 1990.
• [15] http://www.frvt.org/FRVT2005/default.aspx