PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Zastosowanie naturalnych minerałów - bentonitów do sorpcji metali ciężkich ze ścieków przemysłowych

Identyfikatory
Warianty tytułu
EN
Implementation of natural bentonites - minerals to the sorption of heavy metals originating from industrial wastewater
Języki publikacji
PL
Abstrakty
PL
Przedstawiono możliwość zastosowania naturalnych minerałów bentonitu oraz bentonitu wzbogaconego Na, do usuwania metali ciężkich ze ścieków przemysłowych. Sorpcję wybranych jonów metali (Cu2+, Zn2+, Cd2+) przeprowadzono w warunkach laboratoryjnych, metodą ługowania okresowego na roztworach syntetycznych, o stężeniu początkowym porównywalnym ze stężeniem tych związków w ściekach przemysłowych. Badano stopień usunięcia miedzi, cynku i kadmu z roztworów w zależności od czasu, pH środowiska oraz ilości sorbentów. Stwierdzono wysoką efektywność usuwania jonów metali ciężkich z roztworów stosując jako sorbenty bentonity. Stopień usunięcia metali wyniósł 99 % dla Cu, 97 % dla Zn i Cd stosując bentonit wzbogacony w Na oraz 88 % dla Cd, > 50 % dla Zn i 78 % dla Cu przy użyciu bentonitu naturalnego.
EN
This study presents the possibility of implementation of natural bentonite minerals and Na-enriched bentonite in removing heavy metals from industrial wastewater. It was done in laboratory conditions. The sorption of selected metal ions (Cu2+, Zn2+, Cd2+) was carried out by periodic leaching method on synthetic solutions where initial concentration of copper, zinc, cadmium was comparable with the same one in industrial wastewater. The removal degree of copper, zinc, cadmium from solutions depending on time, pH and amount of sorbents was analysed. High efficiency of heavy metal ions removal from solutions with the use bentonities was affirmed. 99 % of Cu removal, 97 % of Zn and Cd, with Na-enriched bentonite and 88 % of Cd, > 50 % Zn and 78 % of Cu removal was obtained with the use of natural bentonite.
Rocznik
Strony
186--191
Opis fizyczny
Bibliogr. 12, tab., wykr., rys.
Twórcy
autor
  • Politechnika Śląska, Katedra Metalurgii, Katowice
Bibliografia
  • 1. Ulmanu M. i in.: Removal of copper and cadmium ions diluted aqueous solutions by low cost and waste mineral adsorbents. Water, Air, and Soil Pollution 2003, nr 142, s. 357÷373.
  • 2. Kyzioł J.: Minerały ilaste jako sorbenty metali ciężkich. Wrocław 1994. Wydaw. PAN.
  • 3. Kaya A., Ören A. H.: Adsorption of zinc from aqueous solutions to bentonite. Journal of Hazardous Materials 2005, s. 183÷189.
  • 4. Abollino O. i in.: Adsorption of heavy metals on Na-montmorillonit. Effect of pH and organic substances. Water Research 2003, nr 37, s. 1619÷1627.
  • 5. Altin O., Ozbelge O. H., Dogu T.: Effect of pH, flow rate and concentration on the sorption of Pb and Cd on montmorillonite: II. Modelling. Journal of Chemical Technology and Biotechnology 1999, nr 74, s. 1139÷1144.
  • 6. Cabrera C., Gabaldón C., Marzal P.: Technical note. Sorption characteristics of heavy metal ions by natural zeolite. Journal of Chemical Technology and Biotechnology 2005, nr 80, s. 477÷481.
  • 7. Al-Haj Ali A., El-Bishtawi R.: Removal of lead and nickel ions using zeolite tuff. Journal of Chemical Technology and Biotechnology 1997, nr 69, s. 27÷34.
  • 8. Panayotova M. I.: Kinetics and thermodynamics of copper ions removal from wastewater by use of zeolite.Waste Management 2001, nr 21, s. 671÷676.
  • 9. Willner J.: Innowacje i metody oczyszczania ścieków przemysłowych w krajowych hutach metali nieżelaznych. Katowice czerwiec 2005, Politechnika Śląska, Wydział Inżynierii Materiałowej i Metalurgii [niepublik.].
  • 10. Praca zbiorowa pod red. Żabińskiego W.: Sorbenty mineralne Polski, Wydaw. AGH, Kraków 1991.
  • 11. Вοльдман Г. М., Зеликман А. Н.: Теория гидро-металлургичес- ких процессов. Москва 1993, ізд. Металлургия.
  • 12. Poradnik fizykochemiczny. Warszawa 1974, Wydaw. Nauk.-Techn.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGH2-0004-0086
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.