PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Current spectrums of a 3.15 MW induction machine based on diagnostic oriented calculations

Autorzy
Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
PL
Spektra prądu silnika indukcyjnego o mocy 3.15 MW na podstawie diagnostycznie zorientowanych obliczeń
Języki publikacji
EN
Abstrakty
EN
The paper presents the effect of the static, dynamic and mixed eccentricity as well as the broken rotor bar on the spectrum of the stator current of a 3.15 MW induction machine, considering both sinusoidal and deformed supply voltages. In order to compare the effect of each ailment the harmonic compositions produced in each case are shown. Out of this comparison the most reliable harmonics are determined which will be a good indicators for the diagnostic purposes of the cage induction machines.
PL
Artykuł prezentuje wpływ ekscentryczności statycznej, dynamicznej i mieszanej, jak również pękniętego pręta klatki, na spektrum prądu stojana silnika indukcyjnego o mocy 3,15 MW, przy czym uwzględniono przypadki zasilania napięciem sinusoidalnym i odkształconym. W celu porównania skutków pokazane zostały składy harmoniczne dla każdego przypadku uszkodzenia. Z tego porównania określono najbardziej odpowiednie harmoniczne, które najlepiej nadają się do wykorzystania do celów diagnostyki maszyn indukcyjnych klatkowych.
Wydawca
Rocznik
Strony
14--26
Opis fizyczny
Bibliogr. 5 poz., rys., wykr., fot.
Twórcy
  • AGH University of Science and Technology, Faculty of Electrical Engineering, Automatics, Computer Science and Electronics, Department of Electrical Machines
Bibliografia
  • [1] Thomson W.T.: On-Line Analysis Of The Current Signal To Diagnose Mechanical Shaft Misalignment In Asynchronous Motor Drive Systems. XXX Sympozjum Maszyn Elektrycznych „Współczesne Problemy Maszyn Indukcyjnych”, Kazimierz Dolny, 13–17 czerwca 1994, 505–510
  • [2] Rusek J.: Reflection of Eccentricities in Spectral Composition of Currents of Induction Machines. International Conference of Electrical Machines (ICEM’96), Vigo, Spain, 10–12.09.1996, 470–475
  • [3] Rusek J.: Computer Implementation of Induction Machine Dynamical Model Accounting for Broken Bars, Eccentricities, Slotting and Parallel Branches. International Conference of Electrical Machines (ICEM’2000), Espoo, Finland, 28–30 August 2000, 868–872
  • [4] Bellini A., Filippetti F., Franceschini G. and Tassoni C.: Quantitative Evaluation of Induction Motor Broken Bars by Means of Electrical Signature Analysis. IEEE, Transactions on Industry Applications, vol. 37, No. 5, 2001, 1248–55
  • [5] Rams W., Rusek J.: Induction-Machine Cage State Diagnosis by Supply From Two Phases. XXX Sympozjum Maszyn Elektrycznych „Współczesne Problemy Maszyn Indukcyjnych”, Kazimierz Dolny, 13-17 czerwca 1994 r., 389–394
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGH2-0003-0058
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.