PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Charakterytyka porowatości a mrozoodporność SCC w obecności oraz bez obecności soli odladzających

Wybrane pełne teksty z tego czasopisma
Identyfikatory
Warianty tytułu
EN
Effects of porosity characteristics on freeze-thaw and freeze-deicing salt resistances of SCC
Języki publikacji
PL
Abstrakty
PL
W artykule rozważany jest wpływ nowej generacji superplastyfikatorów (SP), domieszki stabilizującej (VMA) oraz domieszki przeciwpieniącej (AFA) na wartość parametrów porów powietrznych, mrozoodporność w obecności oraz bez obecności soli odladzających nienapowietrzonego i napowietrzonego betonu samozagęszczalnego (SCC). Rezultaty badań dowiodły, że SCC jest mrozoodporny mimo, że parametry porów powietrznych nie spełniają wymogów normowych. Ponadto, bardzo istotnym wpływem na mrozoodporność SCC jest rodzaj superplastyfikatora.
EN
The influence of a new generation of superplasticizers (SPs), viscosity modifying (VMA) and anti-foaming (AFA) admixtures on the internal frost resistance, frost resistance in the presence of deicing salts, durability coefficient (DF) and parameters of air-voids of both hardened non air-entrained and air-entrained self-compacting concretes (SCC) is investigated. The research results showed that SCC is frost resistant despite the fact that the parameters of air-voids were different than recommended by the standard. Moreover, the type of SP significantly affects the frost-resistance of SCC.
Rocznik
Strony
549--557
Opis fizyczny
Bibliogr. 35 poz., tab., wykr.
Twórcy
  • Politechnika Śląska, Wydział Budownictwa, Katedra Inżynierii Materiałów i Procesów Budowlanych, ul. Akademicka 5, Gliwice, beata.lazniewska@polsl.pl
Bibliografia
  • [1] ACI Committee 318: Building code requirements for structural concrete and commentary (ACI 318-09). ACI Manual of Concrete Practice, Part 3. Michigan, USA: American Concrete Institute.
  • [2] Persson B.: „Internal frost resistance and salt frost scaling of self-compacting concrete”, Cement and Concrete Research, 33, 3 ,(2003), 373-379.
  • [3] Chatterji S.: „Freezing of air-entrained cement-based materials and specific actions of air-entraining agents”, Cement and Concrete Composites, 25, 7, (2003), 759-765.
  • [4] Powers T.C.: „The air requirement of frost-resistant concrete”, w Proceedings of Highway Research Board, Vol.29, Washington D.C., USA: Transportation Research Board, National Academy of Sciences, (1949), 184-202.
  • [5] Sun S., Scherer G.W.: „Effect of air-voids on salt scaling and internal freezing”, Cement and Concrete Research, 40, 2, (2010), 260-270.
  • [6] Glinicki M.A., Cieśla, J., Fordoński K.: „Zagadnienia trwałości mostów betonowych w normach europejskich”, Międzynarodowa Konferencja EKO-MOST 2006, Kielce, 16-17 maja 2006, 115-124.
  • [7] Meyer F.: „Air void distribution in concrete for the Great Belt Link, West Bridge”, Nordic Concrete Research, Publication No. 21, 17.
  • [8] Schell H., Konecny J.: „Development of an End-Results Specification for Air Void parameters of Hardened Concrete In Ontario’s Highway Structures”, 82nd Annual Meeteing, Transportation Research Board, Washington, (2003), 18.
  • [9] Guide to durable concrete. Reported by ACI Committee 201, ACI Journal, 74, 12, (1979), 573-582.
  • [10] Newlon H., Mitchell T.M.: „Freezing and Thawing. Significance of Test and Properties of Concrete and Concrete-Making Materials”, P. Klieger, J. F. Lamond, ASTM Publication, USA, (1994).
  • [11] Neville A.M., Właściwości betonu, Polski Cement, Kraków 2000.
  • [12] Szwabowski J., Łaźniewska-Piekarczyk B.: „Zwiększenie napowietrzenia mieszanki pod wpływem działania superplastyfikatorów karboksylowych”, Cement-Wapno-Beton, nr 4, (2008), 205-215.
  • [13] Khayat K.H.: „Optimization and performance of the air-entrained, self-consolidating concrete”, ACI Mater. J., 97, 5, (2000), 526–535.
  • [14] Kobayashi M., Nakakuro E., Kodama K., Negami S.: „Frost resistance of superplasticized concrete, ACI SP-68, (1981), 269-282.
  • [15] Litvan G.: „Air entrainment in the presence of superplasticizers”, ACI Journal, 80, 4, (1983), 326-331.
  • [16] Łaźniewska-Piekarczyk B.: „Wpływ domieszki zmniejszającej zawartość powietrza na właściwości mieszanki oraz samozagęszczajacego się betonu”, Cement-Wapno-Beton, nr 3, (2010).
  • [17] Łaźniewska-Piekarczyk B.: „Porównanie charakterystyk porowatości samozagęszczalnej mieszanki betonowej i stwardniałego betonu modyfikowanego domieszkami SP, AEA, AFA I VMA”, Materiały Ceramiczne /Ceramic Materials/, 63, 3, (2011), 528-535.
  • [18] PN-EN 480-11:2008 - Domieszki do betonu, zaprawy i zaczynu - Metody badań - Część 11: Oznaczanie charakterystyki porów powietrznych w stwardniałym betonie.
  • [19] PN-EN 206-1:2003, Beton. Część 1: Wymagania, właściwości, produkcja i zgodność.
  • [20] Glinicki M.A.: „Europejskie wymagania na beton napowietrzony w klasie środowiska XF”, Drogownictwo, nr 3, (2005), 86-88.
  • [21] ASTM C 666, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, Annual Book of ASTM Standards, 1991.
  • [22] CEN/TR 15177, Testing the freeze-thaw resistance of concrete – Internal structural damage, Technical Report, April 2006.
  • [23] PN-88-B-06250 Beton Zwykly.
  • [24] PKN-CEN/TS 12390-9:2007- Testing hardened concrete - Part 9: Freeze-thaw resistance – Scaling.
  • [25] Szwabowski J., Łaźniewska-Piekarczyk B.: „Wymogi względem parametrów struktury porowatości mrozoodpornego samozagęszczalnego betonu (SCC)”, Cement-Wapno-Beton, nr 3, (2008), 155.
  • [26] Khayat K.H.: „Viscosity-Enhancing Admixture for Cement-Based Materials – An Overview”, Cement and Concrete Composites, 20, (1998), 171-188.
  • [27] Powers T.C.: „Void spacing as a basis for producing air-entrained concrete”, Journal ACI, No. 50, (1953), 741-760.
  • [28] Pigeon M., Prévost J., Simard J.-M.: „Freeze-Thaw Durability Versus Freezing Rate”, ACI Journal Proceedings, 82, 5, (1985), 684–692.
  • [29] Pigeon M., Lachance M.: J. Am., Concr. Inst., 77, (1981), 282,.
  • [30] Okada E. M., Hisaka Y., Kazama, Hattori K.: „Freeze-thaw resistance of superplasticized concretes”, ACI SP-68, (1981), 215-231.
  • [31] Philleo R.: „Frost susceptibility of high-strength concrete”, Katharine and Bryant Mather International Conference Durability, American Concrete Institute, SP-100-46, Atlanta, (1987), 821-842.
  • [32] Sommer H.: „The precision of the mocroscopical determiniation of the air void system in hardened concrete”, Cement, Concrete and Aggregates, 1, 2, (1979), 49-55.
  • [33] Pigeon M., Marchand J., Pleau R.: „Frost resistant concrete”, Construction and Building Materials, 10, 5, (1996), 339-348.
  • [34] Aïtcin P. C.: „The influence of the spacing factor on the freeze-thaw durability of high-performance concrete”, International Symposium on the High-Performance and Reactive Power Concrete, vol. 4, Sherbrooke 1998, 419-433.
  • [35] Fagerlund G.: „Frost resistance of high performance concrete – some theoretical considerations”, w Proceedings of the RILEM International Workshop “Durability of High Performance Concrete”, 14-15 Feburary, Vienna 1994.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-article-AGH1-0033-0044
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.