PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
  • Sesja wygasła!
Tytuł artykułu

Investigation to the influence of additional magnets positions on four-magnet bi-stable piezoelectric energy harvester

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
To enhance the harvesting performance of a bi-stable piezoelectric energy harvester (BEH), this work proposes a four-magnet BEH (FBEH). FBEH consists of a piezoelectric cantilever beam with a tip magnet, a fixed magnet and two movable magnets. The two movable magnets relative to the fixed magnet can move in both horizontal and vertical directions. A nonlinear distributed parameter model of FBEH is derived through the Hamilton principle. The effects of the excitation frequency and amplitude as well as the horizontal and vertical gap on the harvesting performance are mainly investigated by using the bifurcation diagram, phase diagram, Poincaré map and output power. Numerical simulations demonstrate that the proposed FBEH decreases the potential barrier and creates a higher than typical bi-stable one when subjected to lower excitation amplitudes and frequencies.
Rocznik
Strony
art. no. e140151
Opis fizyczny
Bibliogr. 35 poz., rys., tab.
Twórcy
autor
  • College of Mechanical Engineering, Guangxi University, Nanning, China
autor
  • College of Mechanical Engineering, Guangxi University, Nanning, China
autor
  • College of Mechanical Engineering, Guangxi University, Nanning, China
  • College of Mechanical Engineering, Guangxi University, Nanning, China
  • College of Mechanical Engineering, Guangxi University, Nanning, China
autor
  • College of Mechanical Engineering, Guangxi University, Nanning, China
autor
  • College of Mechanical Engineering, Guangxi University, Nanning, China
Bibliografia
  • [1] F.K. Shaikh and S. Zeadally, “Energy harvesting in wireless sensor networks: A comprehensive review”, Renew. Sustain. Energy Rev., vol. 55, pp. 1041–1054, 2016, doi: 10.1016/j.rser.2015.11.010.
  • [2] M.T. Todaro et al., “Piezoelectric MEMS vibrational energy harvesters: Advances and outlook”, Microelectron. Eng., vol. 183–184, pp. 23–36, 2017, doi: 10.1016/j.mee.2017.10.005.
  • [3] F. Ali, W. Raza, X. Li, H. Gul, and K.H. Kim, “Piezoelectric energy harvesters for biomedical applications”, Nano Energy, vol. 57, pp. 879–902, 2019, doi: 10.1016/j.nanoen.2019.01.012.
  • [4] M.R. Sarker, S. Julai, M.F.M. Sabri, S.M. Said, M.M. Islam, and M. Tahir, “Review of piezoelectric energy harvesting system and application of optimization techniques to enhance the performance of the harvesting system”, Sensors Actuators, A Phys., vol. 300, p. 111634, 2019, doi: 10.1016/j.sna.2019.111634.
  • [5] N. Tran, M. H. Ghayesh, and M. Arjomandi, “Ambient vibration energy harvesters: A review on nonlinear techniques for performance enhancement”, Int. J. Eng. Sci., vol. 127, pp. 162–185, 2018, doi: 10.1016/j.ijengsci.2018.02.003.
  • [6] C. Wei and X. Jing, “A comprehensive review on vibration energy harvesting: Modelling and realization”, Renew. Sustain. Energy Rev., vol. 74, pp. 1–18, 2017, doi: 10.1016/j.rser.2017.01.073.
  • [7] T. Yildirim, M.H. Ghayesh, W. Li, and G. Alici, “A review on performance enhancement techniques for ambient vibration energy harvesters”, Renew. Sustain. Energy Rev., vol. 71, pp. 435–449, 2017, doi: 10.1016/j.rser.2016.12.073.
  • [8] H. Liu, J. Zhong, C. Lee, S.W. Lee, and L. Lin, “A comprehensive review on piezoelectric energy harvesting technology: Materials, mechanisms, and applications”, Appl. Phys. Rev., vol. 5, no. 4, 2018, doi: 10.1063/1.5074184.
  • [9] A. Erturk and D.J. Inman, “A distributed parameter electromechanical model for cantilevered piezoelectric energy harvesters”, J. Vib. Acoust. Trans. ASME, vol. 130, no. 4, pp. 1–15, 2008, doi: 10.1115/1.2890402.
  • [10] Y. Yang and L. Tang, “Equivalent circuit modeling of piezoelectric energy harvesters”, J. Intell. Mater. Syst. Struct., vol. 20, no. 18, pp. 2223–2235, 2009, doi: 10.1177/1045389X09351757.
  • [11] L. Yu, L. Tang, and T. Yang, “Piezoelectric passive self-tuning energy harvester based on a beam-slider structure”, J. Sound Vib., vol. 489, p. 115689, 2020, doi: 10.1016/j.jsv.2020.115689.
  • [12] M. Sayed, A.A. Mousa, and I. Mustafa, “Stability and bifurcation analysis of a buckled beam via active control”, Appl. Math. Model., vol. 82, pp. 649–665, 2020, doi: 10.1016/j.apm.2020.01.074.
  • [13] S. Zhou, J. Cao, and J. Lin, “Theoretical analysis and experimental verification for improving energy harvesting performance of nonlinear monostable energy harvesters”, Nonlinear Dyn., vol. 86, no. 3, pp. 1599–1611, 2016, doi: 10.1007/s11071-016-2979-7.
  • [14] H. T. Nguyen, D. Genov, and H. Bardaweel, “Mono-stable and bi-stable magnetic spring based vibration energy harvesting systems subject to harmonic excitation: Dynamic modeling and experimental verification”, Mech. Syst. Signal Process., vol. 134, p. 106361, 2019, doi: 10.1016/j.ymssp.2019.106361.
  • [15] T. Huguet, A. Badel, O. Druet, and M. Lallart, “Drastic bandwidth enhancement of bistable energy harvesters: Study of subharmonic behaviors and their stability robustness”, Appl. Energy, vol. 226, pp. 607–617, 2018, doi: 10.1016/j.apenergy.2018.06.011.
  • [16] H. Wang and L. Tang, “Modeling and experiment of bistable two-degree-of-freedom energy harvester with magnetic coupling”, Mech. Syst. Signal Process., vol. 86, pp. 29–39, 2017, doi: 10.1016/j.ymssp.2016.10.001.
  • [17] Y. Zhang, Y. Leng, S. Fan, “The Accurate Analysis of Magnetic Force of Bi-stable Piezoelectric Cantilever Energy Harvester”, presented at the ASME International Design Engineering Technical Conferences/Computers and Information in Engineering Conference, Cleveland, Ohio, USA, 2017, doi: 10.1115/DETC2017-67168.
  • [18] T. Tan, Z. Yan, K. Ma, F. Liu, L. Zhao, and W. Zhang, “Nonlinear characterization and performance optimization for broadband bistable energy harvester”, Acta Mech. Sin. Xuebao, vol. 36, no. 3, pp. 578–591, 2020, doi: 10.1007/s10409-020-00946-3.
  • [19] K. Wang, X. Dai, X. Xiang, G. Ding, and X. Zhao, “Optimal potential well for maximizing performance of bi-stable energy harvester”, Appl. Phys. Lett., vol. 115, no. 14, 2019, doi: 10.1063/1.5095693.
  • [20] V. Shah, R. Kumar, M. Talha, and J. Twiefel, “Numerical and experimental study of bistable piezoelectric energy harvester”, Integr. Ferroelectr., vol. 192, no. 1, pp. 38–56, 2018, doi: 10.1080/10584587.2018.1521669.
  • [21] T. Yang and Q. Cao, “Dynamics and high-efficiency of a novel multi-stable energy harvesting system”, Chaos Solitons Fractals, vol. 131, p. 109516, 2020, doi: 10.1016/j.chaos.2019.109516
  • [22] Z. Zhou, W. Qin, and P. Zhu, “Improve efficiency of harvesting random energy by snap-through in a quad-stable harvester”, Sens. Actuators, A, vol. 243, pp. 151–158, 2016, doi: 10.1016/j.sna.2016.03.024.
  • [23] M. Panyam and M.F. Daqaq, “Characterizing the effective bandwidth of tri-stable energy harvesters”, J. Sound Vib., vol. 386, pp. 336–358, 2017, doi: 10.1016/j.jsv.2016.09.022.
  • [24] Y. Leng, D. Tan, J. Liu, Y. Zhang, and S. Fan, “Magnetic force analysis and performance of a tri-stable piezoelectric energy harvester under random excitation”, J. Sound Vib., vol. 406, pp. 146–160, 2017, doi: 10.1016/j.jsv.2017.06.020.
  • [25] M. Lallart, S. Zhou, Z. Yang, L. Yan, K. Li, and Y. Chen, “Coupling mechanical and electrical nonlinearities: The effect of synchronized discharging on tristable energy harvesters”, Appl. Energy, vol. 266, no. January, p. 114516, 2020, doi: 10.1016/j.apenergy.2020.114516.
  • [26] J. Wang and Z. Wang, “A double bi-stable energy harvester for enhanced ability of bi-stable energy harvesting from random vibration”, J. Appl. Sci. Eng., vol. 20, no. 3, pp. 387–392, 2017, doi: 10.6180/jase.2017.20.3.13.
  • [27] G. Wang, W. Liao, B. Yang, X. Wang, W. Xu, and X. Li, “Dynamic and energetic characteristics of a bistable piezoelectric vibration energy harvester with an elastic magnifier”, Mech. Syst. Signal Process., vol. 105, pp. 427–446, 2018, doi: 10.1016/j.ymssp.2017.12.025.
  • [28] Z. Zhou, W. Qin, W. Du, P. Zhu, and Q. Liu, “Improving energy harvesting from random excitation by nonlinear flexible bistable energy harvester with a variable potential energy function”, Mech. Syst. Signal Process., vol. 115, pp. 162–172, 2019, doi: 10.1016/j.ymssp.2018.06.003.
  • [29] X. Li et al., “Broadband spring-connected bi-stable piezoelectric vibration energy harvester with variable potential barrier”, Results Phys., vol. 18, no. May, p. 103173, 2020, doi: 10.1016/j.rinp.2020.103173.
  • [30] S. Zhou, J. Cao, D.J. Inman, J. Lin, S. Liu, and Z. Wang, “Broadband tristable energy harvester: Modeling and experiment verification”, Appl. Energy, vol. 133, pp. 33–39, 2014, doi: 10.1016/j.apenergy.2014.07.077.
  • [31] Z. Zhou, W. Qin, Y. Yang, and P. Zhu, “Improving efficiency of energy harvesting by a novel penta-stable configuration”, Sensors Actuators A., vol. 265, pp. 297–305, 2017, doi: 10.1016/j.sna.2017.08.039.
  • [32] D. Huang, S. Zhou, and G. Litak, “Theoretical analysis of multistable energy harvesters with high-order stiffness terms”, Commun. Nonlinear Sci. Numer. Simul., vol. 69, pp. 270–286, 2019, doi: 10.1016/j.cnsns.2018.09.025.
  • [33] C. Lan and W. Qin, “Enhancing ability of harvesting energy from random vibration by decreasing the potential barrier of bistable harvester”, Mech. Syst. Signal Process., vol. 85, pp. 71–81, 2017, doi: 10.1016/j.ymssp.2016.07.047.
  • [34] M. Ostrowski, B. Błachowski, M. Boche ́nski, D. Piernikarski, P. Filipek, and W. Janicki, “Design of nonlinear electromagnetic energy harvester equipped with mechanical amplifier and spring bumpers”, Bull. Polish Acad. Sci. Tech. Sci., vol. 68, no. 6, pp. 1373–1383, 2020, doi: 10.24425/bpasts.2020.135384.
  • [35] D. Tan, Y.G. Leng, and Y.J. Gao, “Magnetic force of piezoelectric cantilever energy harvesters with external magnetic field”, Eur. Phys. J. Spec. Top., vol. 224, no. 14–15, pp. 2839–2853, 2015, doi: 10.1140/epjst/e2015-02592-6.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-afa371a4-84e4-4905-88e8-e5b33443c2c1
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.