Assessing the Surface Distortion of Plaster Molds Made with the Use of SLA Models

• Autorzy: Shumkov A. A. , Ablyaz T. R. , Muratov K. R.

Identyfikatory

DOI

10.1515/afe-2017-0103

• Języki publikacji: EN

Abstrakty

EN

The method of determining the accuracy of polymer molds in plaster forms has been discussed. Distortion of the surface of molds and plaster molds has been assessed. It has been found that the presence of monolithic and porous structure in the samples does not change the accuracy of the surfaces when forms are prepared for removing the material of the model. It has been found that in case of full-mold casting it is more expedient to form the mold cavity with cellular adjustable structures of molding prototypes.

Słowa kluczowe

EN

stereolithography; photopolymers; form accuracy; cell structure; molding model; plaster form; full-mold casting

PL

stereolitografia; fotopolimer; dokładność formy; struktura komórkowa; odlewanie pełnowymiarowe

• Wydawca: Komisja Odlewnictwa Polskiej Akademii Nauk Oddział w Katowicach
• Czasopismo: Archives of Foundry Engineering
• Rocznik: 2017
• Tom: Vol. 17, iss. 3
• Strony: 123--126
• Opis fizyczny: Bibliogr. 10 poz., rys., tab.

Twórcy

autor

Shumkov A. A.

• Materials, Technology and Designing Machines Department, Perm National Research Polytechnic University, 29, Komsomolsky Ave., Perm, Russia

autor

Ablyaz T. R.

• Materials, Technology and Designing Machines Department, Perm National Research Polytechnic University, 29, Komsomolsky Ave., Perm, Russia

autor

Muratov K. R.

• Materials, Technology and Designing Machines Department, Perm National Research Polytechnic University, 29, Komsomolsky Ave., Perm, Russia

Bibliografia

• [1] Hague, R., D’Costa, G. & Dickens, P.M. (2001). Structural Design and Resin Drainage Characteristics of QuickCast 2.0. Rapid Prototyping Journal. 7(2), 66-72.
• [2] Pandey, P.M., Reddy, N.V. & Dhande, S.G. (2004). Part Deposition Orientation Studies in Layered Manufacturing. In the Proceeding of International Conference on Advanced Manufacturing Technology, (pp. 907-912).
• [3] Yao, W.L. & Leu, M.C. (2000). Analysis and Design of Internal Web Structure of Laser Stereolithography Patterns for Investment Casting. Materials and Design. 21(20), 101-109.
• [4] Norouzi, Y. & Rehmati, S. (2009). A Novel Lattice Structure for SL Investment Casting Patterns. Rapid Prototyping Journal. 4(14), 255-263.
• [5] Kang, H.-W., Park J.H. & Cho, D.-W. (2012). A Pixel Based Solidification Model for Projection Based Stereolithography Technology. Sensors and Actuators. A 178, 223-229.
• [6] Pandey, P.M., N.V. Reddy and S.G. Dhande, 2004. Part Deposition Orientation Studies in Layered Manufacturing. In the Proceeding of International Conference on Advanced Manufacturing Technology, (pp. 907-912).
• [7] Zhou, C., Chen, Y. & Waltz, R.A. (2009). Optimized Mask Image Projection for Solid Freeform Fabrication. ASME Journal of Manufacturing Science and Engineering. 1s31(6), 1-19.
• [8] Pastirčák, R., Sládek, A. & Kucharčíková, E. (2015). The Production of Plaster Molds with Patternless Process Technology. Archives of Foundry Engineering. 15(2), 91-94.
• [9] Budzik, G., Marciniec, A., Markowski, T., Oleksy, M. Cygnar, M. (2009). The Geometrical Precision of the Silicone Matrices to the Manufacturing of the Models of the Gear. Archives of Foundry Engineering. 9(2), 137-142.
• [10] Budzik, G. & Matysiak, H. (2010). Geometric Accuracy of Wax Bade Models Manufactured in Silicon Moulds. Archives of Foundry Engineering. 10(1), 399-404.

Uwagi

PL

Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę (zadania 2017)