Investigation of Dust Transfer Processes During Loading and Unloading Operations Using Software Simulation

• Autorzy: Smirnov Y. D. , Ivanov A. V.

Identyfikatory

DOI

10.12911/22998993/86146

• Języki publikacji: EN

Abstrakty

EN

In order to limit dust transfer during the operations of material transportation at the factories of the construction industry, factories of the mineral and raw materials complex employ special dust suppression bunkers. These devices are structures located above a railway hopper (either a truck body or a conveyor). Through the input portal of the device, the transported material is transferred. Dusting can also be carried out under the bunkers from the side of the hopper, into which the material is poured. The design of dust suppression bins should be accompanied by a simulation of dust propagation processes. The simulation should be carried out in order to minimize the dust emissions and to select the optimum locations for the dust suppression sprayers.

Słowa kluczowe

EN

bunker; dust suppression; ANSYS; simulation; ROCKY; hopper

• Wydawca: Polskie Towarzystwo Inżynierii Ekologicznej ; Lublin University of Technology
• Czasopismo: Journal of Ecological Engineering
• Rocznik: 2018
• Tom: Vol. 19, nr 4
• Strony: 29--33
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Smirnov Y. D.

• Saint-Petersburg Mining University, 21 Lines of Vasilyevsky Island, 199106 Saint-Petersburg, Russia

autor

Ivanov A. V.

• Saint-Petersburg Mining University, 21 Lines of Vasilyevsky Island, 199106 Saint-Petersburg, Russia

Bibliografia

• 1. Basov K.A. 2016. ANSYS for constructors. DMK Press, Russia, pp. 248.
• 2. Bulbashev A.P., Gasparian N.A., Kovshov S.V., Nikulin A.N., Smirnov Yu.D., Shuvalov Yu.V. 2009. Rational organization of mining in quarries with difficult working conditions of miners. St. Petersburg. International Academy of Ecology, Human and Nature Safety, pp. 464.
• 3. Fedorova N.N., Valger S.A., Danilov M.N., Zaharova U.V. 2017. Basics of working in Ansys 17. DMK Press, Russia, pp. 210.
• 4. Ilchenkova S. 2005. Reduced dust load on the environment by binding particulate materials dusty surfaces in the territory of mining enterprises. PhD thesis, pp. 213.
• 5. Ivanov A.V., Smirnov Yu.D. 2016. The impact of anthropogenic alluvial arrays on areas settlements depending on the particle size distribution of stored tailings. Journal of Ecological Engineering, 17(2), 59-63.
• 6. Kaplun B.A., Morozov E.M., Shamraeva M.A. 2017. ANSYS is in the hands of an engineer. A Practical Guide. Lenand Publishing, Russia, pp. 272.
• 7. Pashkevich M.A., Smirnov Yu.D., Korelsky D.S., Ivanov A.V. 2014. Dust suppression bunker. Patent for invention of the Russian Federation No. 2536573, IPC B65G69/18, applicant and patent holder of the Federal State Educational Establishment of Higher Professional Education “National Mineral Resources University”, No. 2013131917/11; application on 07.09.2013; published on 27.12.2014, the Bulletin No. 36.
• 8. Pashkevich M.A., Smirnov Yu.D., Dobrynin O.S., Bulbashev A.A., Ivanov A.V. 2012. Sprayer for dust suppression. Patent for invention of the Russian Federation No. 2446021, IPC B05B7/12, applicant and patent holder of the “Mining University”, No. 01010133351/03; application on 13.08.2010; published on 27.03.2012, Bulletin No. 9.
• 9. Volkodaeva M.V. 2015. The use of geoinformation technologies for optimization of the location of air quality monitoring stations. Journal of Mining Institute, 215, 107-114.