Conformity of finished forming sieves for paper industry

• Autorzy: Nada Bojić , Nikolić Ružica , Manojlović Goran

Identyfikatory

DOI

10.30657/pea.2019.24.07

• Języki publikacji: EN

Abstrakty

EN

The sieves' manufacturers that want to be competitive at the market must have the implemented quality control system. Different methods, based on taking the sample, which is a representative of the total quantity of the forming sieves production, are applied for evaluation of the sieve's conformity. The basic characteristics of this type of the quality function are control, measuring and testing of the forming sieves' properties at the end of the manufacturing process. The objective is to detect and separate the products that deviate from the set criteria, to remain in the factory, then to be repaired if possible or discarded in the opposite case and thus to prevent delivery of the defective sieves to the paper manufacturers.

Słowa kluczowe

EN

forming sieve; quality control system; conformity; measurement

PL

zarządzanie jakością; system kontroli jakości; sito formujące

• Wydawca: Oficyna Wydawnicza Stowarzyszenia Menedżerów Jakości i Produkcji
• Czasopismo: Production Engineering Archives
• Rocznik: 2019
• Tom: Vol. 24
• Strony: 29--32
• Opis fizyczny: Bibliogr. 15 poz., rys., tab.

Twórcy

autor

Nada Bojić

• Fasil a. d. Arilje, Svetolika Lazarevića 18, 31230 Arilje, Serbia

autor

Nikolić Ružica

• Research Center, University of Žilina, Univerzitna 8215/1, 010 26 Žilina, Slovakia

autor

Manojlović Goran

• E.S. "Ljubica Radosavljević Nada", Djerdapska nn, 19000 Zaječar, Serbia

Bibliografia

• 1. Bojic, N., Jugovic, Z., Dragicevic, S., Slavkovic, R., 2012. Comparative Study of the Tensile Stress of Diagonal Sieves Produced by Plasma Welding and Hard Soldering Process, Metalurgia International, 17(5), 25-29.
• 2. Bojić, N., Jugović, Z., Nikolić, R., Lazić, V., Čukić, R., 2011. Determination of optimal way for the diagonal sieves joining, IRMES 2011, Zlatibor, Serbia, 573-578.
• 3. Bojic, N., Nikolic, R., Banic, M., Hadzima, B., 2018. Evaluation of mechanical properties of the two PVC conveyor belts, Communications, 20(4), 47-51.
• 4. Bojić, N.V., Nikolić, R.R., Jugović, B.Z., Jugović, Z.S., Gvozdenović, M., 2013. Uniaxial tension of drying sieves, Chemical Industry, 67(4), 655-662.
• 5. Bošković, G., Andjelković-Pešić, M., 2011. Quality management – the basis for competitiveness of a company and economy, Faculty of Economics, University of Niš, Serbia, (in: Serbian)
• 6. Bošković, G., Radosavljević, M., 2015. Analysis of factors and effects of the products design quality, Economical themes, 4, 495-513. (in: Serbian)
• 7. Ćorlukić, F., 1987. Technology of paper, The School book, Zagreb, Croatia.
• 8. De Toni, A., Tonchia, S. 2001. Performance measurement systems - models, characteristics and measures, International Journal of Operations and Production Management, 21(1/2), 46-70.
• 9. Gavelin, G., 1998. Paper Machine Design and Operation: Descriptions and Explanations, Angus Wilde Publications, Vancouver, Canada.
• 10. Golubović, A., 1984. Technology of manufacturing and properties of paper, Graphical Faculty, Zagreb, Croatia.
• 11. Heleta, M., 2008. Quality management, Singidunum University, Belgrade. (in: Serbian)
• 12. Popovic, B., Boškovic, V., 2011. Improved planning in the automotive industry - Advanced product quality planning, Festival of Quality - FQ 2011, Kragujevac, Serbia, A84-A90.
• 13. Radlovački, V., 2007. The general model of monitoring and evaluation of the quality management system effectivity, Faculty of technical Sciences, Novi Sad, Serbia. (in: Serbian)
• 14. Simeunović, B.P., 2015. Development of process performance measurement model, Doctoral Dissertation, University of Belgrade, Faculty of Organizational Sciences, Belgrade, Serbia. (in: Serbian)
• 15. Smook, G.A., 2003. Handbook for pulp and paper technologists, third ed. TAPPI press, Atlanta, GA, US.

Uwagi

Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).