Effect of Nb and Ti micro-additives and thermo-mechanical treatment of high-manganese steels with aluminium and silicon on their microstructure and mechanical properties

• Autorzy: Sozańska-Jędrasik L. , Mazurkiewicz J. , Borek W. , Matus K. , Chmiela B. , Zubko M.

Identyfikatory

DOI

10.24425/amm.2019.126229

• Języki publikacji: EN

Abstrakty

EN

The results are based on two experimental high-manganese X98MnAlSiNbTi24-11 and X105MnAlSi24-11 steels subjected to thermo-mechanical treatment by hot-rolling on a semi-industrial processing line. The paper presents the results of diffraction and structural studies using scanning and transmission electron microscopy showing the role of Nb and Ti micro-additives in shaping high strength properties of high-manganese austenitic-ferritic steels with complex carbides. The performed investigations of two experimental steels allow to explain how the change cooling conditions after thermo-mechanical treatment of the analysed steels affects the change of their microstructure and mechanical properties. The obtained results allow assessing the impact of both the chemical composition and the applied thermo-mechanical treatment technology on the structural effects of strengthening of the newly developed steels.

Słowa kluczowe

EN

high-manganese steels; TRIPLEX; microstructure; ĸ carbides; M7C3; EBSD; Nb and Ti micro-additives; grain size

• Wydawca: Institute of Metallurgy and Materials Science of Polish Academy of Sciences ; Committee of Materials Engineering and Metallurgy of Polish Academy of Sciences
• Czasopismo: Archives of Metallurgy and Materials
• Rocznik: 2019
• Tom: Vol. 64, iss. 1
• Strony: 133--142
• Opis fizyczny: Bibliogr. 27 poz., fot., rys., tab.

Twórcy

autor

Sozańska-Jędrasik L.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Mazurkiewicz J.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Borek W.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Matus K.

• Silesian University of Technology, Institute of Engineering Materials and Biomaterials, 18a Konarskiego Str., 44-100 Gliwice, Poland

autor

Chmiela B.

• Silesian University of Technology, Institute of Materials Science, Faculty of Materials Engineering and Metallurgy, 8 Krasinskiego Str., 40-019 Katowice, Poland

autor

Zubko M.

• University of Silesia, Institute of Materials Science, 1a 75 Pułku Piechoty, 41-500 Chorzów, Poland

Bibliografia

• [1] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, M. Kraus, METAL 2018, 855-860 (2018). ISBN 978-80-87294-84-0.
• [2] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, L. A. Dobrzański, Mater. Eng. 225 (5), 184-191 (2018). DOI 10.15199/28.2018.5.4
• [3] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, L. A. Dobrzański, Mater. Eng. 38 (2), 69-76 (2017).
• [4] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, Topical Issues of Rational Use of Natural Resources, 235-241 (2018). ISBN: 978-0-367-02743-8.
• [5] L. Sozańska-Jędrasik, J. Mazurkiewicz, W. Borek, MATEC Web of Conferences, CMES'18. 252, 08005 (2019). https://doi.org/10.1051/matecconf/201925208005
• [6] S. Chen, R. Rana, A. Haldar, R. K. Ray, Prog. Mater. Sci. 89, 345-391 (2017).
• [7] M. Bausch, G. Frommeyer, H. Hofmann, E. Balichev, M. Soler, M. Didier, L. Samek, Final Report RFCS Grant No. RFSR-CT-2006-00027 (2013).
• [8] D. T. Pierce, J. A. Jiménez, J. Bentley, D. Raabe, J. E. Wittig, Acta Mater. 100, 178-190 (2015).
• [9] L. Zhang, R. Song, C. Zhao, F. Yang, Y. Xu, S. Peng, Mater. Sci. Eng. A 643, 183-193 (2015).
• [10] A. Etienne, V. Massardier-Jourdan, S. Cazottes, X. Garat, M. Soler, I. Zuazo, X. Kleber, Metall. Mater. Trans. A 45, 324-334 (2014).
• [11] A. Grajcar, Thermodynamic analysis of precipitation processes in Nb-Ti-microalloyed Si-Al TRIP steel, J. Therm. Anal. Calorim. 118 (2), 1011-1020 (2014).
• [12] M. Opiela, Arch. Metall. Mater. 59 (3), 1181-1188 (2014).
• [13] L. A. Dobrzański, W. Kasprzak, A. Zarychta, M. Ligarski, J. Mazurkiewicz, J. Mater. Process. Technol. 64 (1-3), 93-99 (1997).
• [14] H. Zhang, D. Ponge, D. Raabe, Mater. Sci. Eng. A 610, 355-369 (2014).
• [15] S. S. Sohn, H. Song, B. C. Suh, J. C. Suh, J. H. Kwak, B. J. Lee, N. J. Kim, S. Lee, Acta Mater. 96, 301-310 (2015).
• [16] A. J. Craven, K. He, L.A.J. Garvie, T. N. Baker, Acta Mater. 48, 3857–3868 (2000)
• [17] J. Moon, S.-J. Park, J. H. Jang, T.-H. Lee, C.-H. Lee, H.-U. Hong, D.-W. Suh, S.H. Kim, H.N. Han, B.H. Lee, Scripta Mater. 127, 97-101 (2017).
• [18] O. A. Zambrano, J. Valdés, Y. Aguilar, J. J. Coronado, S. A. Rodríguez, R. E. Logé, Mater. Sci. Eng. A 689, 269-285 (2017).
• [19] M. J. Yao, P. Dey, J.-B. Seol, P. Choi, M. Herbig, R.K.W. Marceau, T. Hickel, J. Neugebauer, D. Raabe, Acta Mater. 106, 229-238 (2016).
• [20] L. N. Bartlett, D. C. Van Aken, J. Medvedeva, D. Isheim, N. I. Medvedeva, K. Song, Metall. Mater. Trans. A 45, 2421-2435 (2014).
• [21] D. Liu, M. Cai, H. Ding, D. Han, Mater. Sci. Eng. A 715, 25-32 (2018).
• [22] W. Borek, T. Tański, Z. Jonsta, P. Jonsta, L. Cizek, METAL 2015: 24th International Conference On Metallurgy And Materials, 307-313 (2015).
• [23] T. Tański, P. Snopiński, W. Borek, Mater. Manufact. Processes 32 (12), 1368-1374 (2017).
• [24] L. A. Dobrzański, A. Grajcar, W. Borek, Mater. Sci. Forum 368, 3224-3229 (2010).
• [25] L. A. Dobrzański, W. Borek, J. Mazurkiewicz, Materialwiss Werkst. 47 (5-6), 428-435 (2016).
• [26] L. A. Dobrzański, W. Borek, J. Mazurkiewicz, Arch. Metall. Mater. 61 (2), 725-730 (2016).
• [27] S. Ebied, A. Hamadan, W. Borek, M. Gepreel, A. Chiba, Mater. Charact. 139, 176-185 (2018).

Uwagi

EN

1. Scientific work was financed in the framework of project funded by the National Science Centre based on the decision number DEC-2012/05/B/ST8/00149. Liwia Sozańska-Jędrasik is a scholarship holder of the Visegrad International Scholarship Grant for the period September 2017 to July 2018. so some of the research was conducted in collaboration with Ing. Martin Kraus from VŠB – Technical University of Ostrava in the Czech Republic. This publication was financed by the Ministry of Science and Higher Education of Poland as the statutory financial grant of the Faculty of Mechanical Engineering SUT.

PL

2. Opracowanie rekordu w ramach umowy 509/P-DUN/2018 ze środków MNiSW przeznaczonych na działalność upowszechniającą naukę (2019).