Powiadomienia systemowe
- Sesja wygasła!
Tytuł artykułu
Treść / Zawartość
Pełne teksty:
Identyfikatory
Warianty tytułu
Języki publikacji
Abstrakty
The article highlights the research pertaining to the problem of reinforcement of underground excavations with bolting system, using chemical method based on resin cartridges, which currently is a global trend in mines. Theoretical model of rock bolt installed in a rockmass was discussed and described with proper formulas for explanation the role of single discontinuity and its mechanism affecting stress-strain characteristics of the reinforcement system, based on an adhesive method. The presented model has been verified with results of numerical modelling of stress-strain and deformation composition of the "rock bolt/resin cartridge/rock block" system, depending on the bond coefficient of the mixture which fixes the rock bolt. The analysis of the modelling results showed that for the stress-strain conditions of the rock bolt, too high a bond between the bolt and the rock is dangerous (critical), as it leads to high local tensile and deformation stresses.
Słowa kluczowe
Czasopismo
Rocznik
Tom
Strony
233--245
Opis fizyczny
Bibliogr. 21 poz., rys., tab.
Twórcy
autor
- Donetsk National Technical University, Ukraine
autor
- AGH University of Science and Technology, Poland
autor
- AGH University of Science and Technology, Poland
autor
- Donetsk National Technical University, Ukraine
Bibliografia
- CAO J., ZHANG N., WANG S., QIANA D., XIEA Z., 2020, Physical model test study on suport of super pre-stressed anchor in the mining engineering, Engineering Failure Analysis, 118, 104833.
- GHADIMI M., 2017, Effect of profile bolt in bond strength fully grouted rock bolts using analytical andexperimental methods, International Journal of Mining and Mineral Engineering, Vol. 8, Issue 2, 156–168.
- HOIEN A.H., LI C.C., ZHANG N., 2021, Pull-out and Critical Embedment Length of Grouted Rebar Rock Bolts-Mechanisms when Approaching and Reaching the Ultimate Load, Rock Mechanics and Rock Engineering, 54, 1–18.
- JAHANGIR Е., BLANCO-MARTÍN L., HADJ-HASSEN F., TIJANI M., 2021, Development and application of an interface constitutive model for fully grouted rock-bolts and cable-bolts, Journal of Rock Mechanics and Geotechnical Engineering, 13 (4), 811–819; https://doi.org/10.1016/j.jrmge.2021.03.011
- KORZENIOWSKI W., 2006, Evaluation of State of Underground Gateroads and Rooms Based on Empirical Research Method, Wydawnictwo AGH University of Science and Technology, Monographs, ISSN 0867-6631, Cracow.
- LI C., 2012, Performance of D-bolts Under Static Loading, Rock Mechanics and Rock Engineering, 45 (2), 183–192.
- LI C.C., 2020, Principles and methods of rock support for rock burst control, Journal of Rock Mechanics and Geotechnical Engineering, 12, 1–14.
- LI C., STJERN G., MYRVANG A., 2014, A review on the performance of conventional and energyabsorbing rockbolts, Journal of Rock Mechanics and Geotechnical Engineering, 6, 315–327.
- LI L., HAGAN P., SAYDAM S., HEBBLEWHITE B., 2016, Shear resistance contribution of suport systems in double shear test, Tunnelling and Underground Space Technology, 56, 168–175.
- PRUŠKA J., 2017, Modelling rock mass improvement using rock bolts, Acta Polytechnica CTU Proceedings, 10, 43–47.
- SAKHNO I., SAKHNO, S., ISAIENKOV О., Kurdiumow D., 2019, Laboratory studies of a high-strength roof bolting by means of self-extending mixtures, Mining of Mineral Deposits, 13 (2), 17–26.
- SAKHNO I., SAKHNO S., KURDIUMOW D., SHVETS I., 2018, Studies of new nonadhesive anchoring, Mining of Mineral Deposits, Vol. 12, Issue 2, 85–94.
- SHEN J., 2021, Experimental study on anchorage performance of resin grout with steel segment, Advances in Civil Engineering, Vol. Article ID 5580555, 19 pp.
- SKRZYPKOWSKI K., 2021, An Experimental Investigation into the Stress–Strain Characteristic under Static and Quasi-Static Loading for Partially Embedded Rock Bolts, Energies, 14, 1483.
- SKRZYPKOWSKI K., KORZENIOWSKI W., ZAGÓRSKI K., ZAGÓRSKA A., 2020, Modified rock bolt support for mining method with controlled roof bending, Energies, Vol. 13, No. 8, pp. 1–20.
- WEN Z., JIANG Y., HAN Z, YANG S., WANG X., 2016, Bolting Principles of a New EnergyAbsorbing Expandable Rock Bolt, Engineering Transactions, Vol. 64, Issue 1, 89–103.
- WU K., SHAO Z.S., QIN S., WEI W., CHU Z., 2021, A critical review on the performance of yielding supports in squeezing tunnels, Tunn. Undergr. Space Technol., Vol. 114, 103815.
- WU X., JIANG Y., WANG G., GONG B., GUAN Z., DENG T., 2019, Performance of a New Yielding Rock Bolt Under Pull and Shear Loading Conditions, Rock Mechanics and Rock Engineering, 52, 3401–3412.
- YOKOTA Y., ZHAO Z., SHANGA J., NIE W., DATE K., IWANO K., OKADA Y., 2019, Effect of bolt configuration on the interface behaviour between a rock bolt and bond material: A comprehensive DDA investigation, Computers and Geotechnics, 105, 116–128.
- ZHAO X., ZHANG S., ZHU Q., LI H., CHEN G., ZHANG P., 2020, Dynamic and static analysis of a kind of novel J energy-releasing bolts, Geomatics. Natural. Hazards Risk, Vol. 11, 2486–2508.
- ZESHENG D., BOTAO Q., FUCHAO T., 2016, Numerical analysis of the effects of rock bolts on stress redistribution around a roadway, International Journal of Mining Science and Technology, 26 (6), 975–980.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-addddaab-d910-4af3-a8f8-0ced40d09e5c