Safety Studies on Hydraulic Proportional Valves With Electrical Position Feedback

• Autorzy: Reinert D. , Kimura T. , Gorgs K.- J.
• Języki publikacji: EN

Abstrakty

EN

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Several failures were introduced into the feedback loop, especially into the 2 solenoids and the inductive position transducer. The behaviour of the valve for square and ramp reference signals was recorded and systematically analysed. It was shown that failures could be detected by monitoring the residual signal from the equipment under control or the residual signal from the sensor. It was possible to achieve the safe position within twice the normal response time of the valve by switching off the current of both solenoids. The application of these results for a new generation of safe proportional valves is discussed. The use of the results of these investigations obviates the need for redundancy of the electrical position monitoring arrangement in a safe proportional valve.

Słowa kluczowe

EN

proportional value; electrical position feedback; failure behaviour; hydraulic safety; fault detection

PL

zawór; elektryczność; hydraulika

• Wydawca: Taylor & Francis
• Czasopismo: International Journal of Occupational Safety and Ergonomics
• Rocznik: 2006
• Tom: Vol. 12, No. 1
• Strony: 105--115
• Opis fizyczny: Bibliogr. 11 poz., rys., tab., wykr.

Twórcy

autor

Reinert D.

• BG Institute for Occupational Safety and Health (BGIA), Sankt Augustin, Germany

autor

Kimura T.

• Department of Mechanical Engineering, Nagaoka University of Technology (NUT), Nagaoka Niigata, Japan

autor

Gorgs K.- J.

• BG Institute for Occupational Safety and Health (BGIA), Sankt Augustin, Germany

Bibliografia

• 1.Gorgs K-J, Grigulewitsch W, Kleinbreuer W. Elektrohydraulische Stetig-Wegeventile mit Sicherheitsverantwortung. O + P Ölhydraulik und Pneumatik 2001;45(11–12):745–8.
• 2.Kleinbreuer W, Kreutzkampf F, Meffert K, Reinert D. Categories for safety-related control systems in accordance with EN 954-1 (BIA Report 6/97e). Sankt Augustin, Germany: Hauptverband der gewerblichen Berufsgenossenschaften (HVBG); 1997. Retrieved February 1, 2005, from: http://www.hvbg.de/e/bia/pub/rep/rep02/bia0697.html.
• 3.European Committee for Standardization (CEN). Safety of machinery—safety-related parts of control systems (Standard No. EN 954-1:1996). Brussels, Belgium: CEN; 1996.
• 4.European Committee for Standardization CEN). Safety of machinery—safety-related parts of control systems. (Standard No. EN 954-2:2000). Brussels, Belgium: CEN; 2000.
• 5.Mannesmann Rexroth. 4/2 and 4/3 proportional directional valves, directly controlled, with electrical position feedback. Types 4WRE and 4WREE. 2004. Retrieved July 21, 2004, from: http://www.hpts.co.kr/rexroth/RE29061.PDF.
• 6.Mannesmann Rexroth. Product description and commissioning. Instructions for VRPD digital amplifiers for proportional valves with electrical feedback. Type VT-VRPD-1, Series 1X. Type VT-VRPD-2, Series 1X. 2003. Retrieved December 19, 2005, from: http://www.boschrexroth.com/business_units/bri/en/products/p_pages/06_elektronik/01_verstaerkerkarten_module/01_analoge_verst_eu/index.jsp [see Further InformationRE 301125].
• 7.Mannesmann Rexroth. PC-Programm BODIV for digital amplifier cards. RE 29899/07.00. 2000. Retrieved December 19, 2005, from: http://www.boschrexroth.com/business_ units/bri/en/products/p_specials/i_hacd/i_bodiv/index.jsp [see BODIV download].
• 8.Tektronix. Tektronix digital phosphor oscilloscopes 2004. Retrieved December 19, 2005, from: http://www.tequipment.net/TektronixTDS3014B.asp.
• 9.Reinert D, Schaefer M. Certification of highly complex safety-related systems. International Journal of Occupational Safety and Ergonomics (JOSE) 1999;5(4):537–52.
• 10.Klug J, Schaefer M. Fehlererkennende Maßnahmen in Mikroprozessoren. Sicherheitstechnisches Informations- und Arbeitsblatt 330 225. In: Berufsgenossenschaftliches Institut für Arbeitsschutz (BGIA). BGIA-Handbuch Sicherheit und Gesundheitsschutz am Arbeitsplatz [loose-leaf edition]. 2nd ed. Berlin, Germany: Erich Schmidt Verlag; 2003. p. 1–9.
• 11.Berufsgenossenschaftliches Institut für Arbeitsschutz (BIA). Empfehlungen für die Prüfung von kontaktbehaftet abgeschalteten elektro-hydraulischen Stetig-Wegeventilen für sicherheitsbezogene Teile von Steuerungen (Report PE-BIA-M01). Sankt Augustin, Germany: BIA; 2000. In German.