Implementation of turbulence damping in the OpenFOAM multiphase flow solver interFoam

• Autorzy: Polansky Jiri , Schmelter Sonja

Identyfikatory

DOI

10.24425/ather.2022.140923

• Języki publikacji: EN

Abstrakty

EN

In the presented work Egorov’s approach (adding a source term to the ω-equation in the k-ω model, which mimics the damping of turbulence close to a solid wall) was implemented in on the subclass of shear stress transport models. Hence, turbulence damping is available for all shear stress transport type models, including hybrid models that are based on the ω-equation. It is shown that turbulence damping improves the prediction of the axial velocity profile not only for Reynolds-averaged Navier–Stokes simulation but also for detached eddy simulation and delayed detached eddy simulation models. Furthermore, it leads to a more realistic estimation of the pressure drop and, hence, to a more correct prediction of the liquid level. In this paper, simulation results for four different turbulence models are presented and validated by comparison with experimental data. Furthermore, the influence of the magnitude of the damping factor on the pressure drop in the channel is investigated for a variety of different gas-to-liquid flow rate ratios. These investigations show that higher gas-to-liquid flow rate ratios require higher damping factors to correctly predict the pressure drop. In the end, advice is formulated on how an appropriate damping factor can be determined for a specific test case.

Słowa kluczowe

EN

multiphase flow; stratified flow; turbulence damping; computational fluid dynamics; OpenFOAM; Reynolds-averaged Navier–Stokes; Detached Eddy Simulation; Delayed Detached Eddy Simulation

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN ; Komitet Termodynamiki i Spalania PAN
• Czasopismo: Archives of Thermodynamics
• Rocznik: 2022
• Tom: Vol. 43, no 1
• Strony: 21--43
• Opis fizyczny: Bibliogr. 26 poz., rys.

Twórcy

autor

Polansky Jiri

• Czech Technical University in Prague, Jugoslávských partyzánů 1580/3, 160 00 Prague 6 – Dejvice, Czech Republic

autor

Schmelter Sonja

• Physikalisch-Technische Bundesanstalt (PTB), Abbestraße 2-12, D-10587 Berlin-Charlottenburg, Germany

Bibliografia

• [1] Egorov Y., Boucker M., Martin A., Pigny S., Scheuerer M., Willemsen S.: Validation of CFD codes with PTS-relevant test cases. Tech. Rep. EVOL-ECORAD07, 2004.
• [2] Fabre J., Masbernat L., Suzanne C.: Stratified flow. Part I: Local structure. Multiphas. Sci. Technol. 3(1987), 285–301.
• [3] Höhne T., Vallée C.: Experiments and numerical simulations of horizontal twophase flow regimes using an interfacial area density model. J. Comput. Multiphas. Flow. 2(2010), 3, 131–143.
• [4] Vallée C., Höhne T.: CFD validation of stratified two-phase flows in a horizontal channel. In: Annual Report 2006 (F.-P. Weiss, U. Rindelhardt, Eds.), FZR-465, Forschungszentrum Dresden Rossendorf, 2007, 33–38.
• [5] Frederix E.M.A., Mathur A., Dovizio D., Geurts B.J., Komen E.M.J.: Reynolds-averaged modeling of turbulence damping near a large-scale interface in two-phase flow. Nucl. Eng. Design 333(2018), 122–130.
• [6] Höhne T., Vallée C.: Modelling of stratified two phase flows using an interfacial area density model. In: Proc. Multiphase Flow 2009, 5th Int. Conf. on Computational and Experimental Methods in Multiphase and Complex Flow, New Forest, 15-17 June, 2009, 123–133.
• [7] Höhne T., Mehlhoop J.-P.: Validation of closure models for interfacial drag and turbulence in numerical simulations of horizontal stratified gas–liquid flows. Int. J. Multiphas. Flow 62(2014), 1–16.
• [8] Porombka P., Höhne,T.: Drag and turbulence modelling for free surface flows within the two-fluid Euler–Euler framework. Chem. Eng. Sci. 134(2015), 348–359.
• [9] Ansys Fluent User’s Guide. Release 2021 R1. Ansys, Inc., Canonsburg 2021.
• [10] Chinello G., Ayati A.A., McGlinchey D., Ooms G., Henkes R.: Comparison of computational fluid dynamics simulations and experiments for stratified air-water flows in pipes. J. Fluid. Eng. 141(2019), 5, 051302-1–051302-12.
• [11] Gada V.H., Tandon M.P., Elias J., Vikulov R., Lo S.: A large scale interface multi-fluid model for simulating multiphase flows. Appl. Math. Model. 44(2017), 189–204.
• [12] Lo S., Tomasello A.: Recent progress in CFD modelling of multiphase flow in horizontal and near-horizontal pipes. In: Proc. 7th North American Conf. on Multiphase Technology, Banff, June 2010, BHR-2010-F1.
• [13] Fan W., Li H., Anglart H.: Numerical investigation of spatial and temporal structure of annular flow with disturbance waves. Int. J. Multiphas. Flow 110(2019), 256–272.
• [14] Fan W., Anglart H.: Progress in phenomenological modeling of turbulence damping around a two-phase interface. Fluids 4(2019), 3, 136.
• [15] Fan W., Anglart H.: varRhoTurbVOF 2: Modified OpenFOAM volume of fluid solvers with advanced turbulence modeling capability. Comput. Phys. Commun. 256(2020), 107467.
• [16] Wilcox D.C.: Turbulence Modeling for CFD Vol. 2. DCW Industries, La Canada 1998.
• [17] Menter F., Kuntz M., Langtry R.: Ten years of industrial experience with the SST turbulence model. In: Turbulence, Heat and Mass Transfer 4 (K. Hanjalic, Y. Nagano, M. Tummers, Eds.). Begell House, 2003.
• [18] Langtry R.B., Menter F.R.: Correlation-based transition modeling for unstructured parallelized computational fluid dynamics codes. AIAA J. 47(2009), 12, 2894–2906.
• [19] Egorov Y., Menter F.: Development and application of SST-SAS turbulence model in the desider project. In: Advances in Hybrid RANS-LES Modelling (S.-H. Peng, W. Haase, Eds.), Springer, Berlin Heidelberg, 2008, 261–270.
• [20] Strelets M.: Detached eddy simulation of massively separated flows. In: Proc. 39th AIAA Aerospace Sciences Meet. Exhib., Reno, Jan. 8-11, 2001.
• [21] Gritskevich M., Garbaruk A., Schütze J., Menter F.: Development of DDES and IDDES formulations for the k-ω shear stress transport model. Flow Turbul. Combust. 88(2012), 3, 431–449.
• [22] Müller-Steinhagen H., Heck K.: A simple friction pressure drop correlation for two-phase flow in pipes. Chem. Eng. Process. 20(1986), 6, 297–308.
• [23] Launder B., Spalding D.: The numerical computation of turbulent flows. Comput. Methods Appl. Mech. Eng. 3(1974), 2, 269– 289.
• [24] Menter F.R.: Two-equation eddy-viscosity turbulence models for engineering applications. AIAA J. 32(1994), 8, 1598–1605.
• [25] Spalart P., Deck S., Shur M., Squires K., Strelets M., Travin A.: A new version of detached-eddy simulation, resistant to ambiguous grid densities. Theor. Comput. Fluid Dyn. 20(2006), 181–195.
• [26] Frank T.: Numerical simulation of slug flow regime for an air-water two-phase flow in horizontal pipes. In: Proc. 11th Int. Topical Meeting on Nuclear Reactor Thermal-Hydraulics (NURETH-11), Avignon, Oct. 2–6, 2005.

Uwagi

This project has received funding from the EMPIR programme co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation programme.

Opracowanie rekordu ze środków MEiN, umowa nr SONP/SP/546092/2022 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2022-2023).