PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Friction behavior of new composite bearing materials for printing machines and their special use under heavy operating conditions

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
In the paper the friction film formation analysis of the new composite bearings based on powder nickel alloy EP975 with solid lubricant CaF2 powder after tribological tests has been presented. Dense films are formed during friction of contact surfaces for tribological tests at high speed (or temperature) and loads. Such films consist of chemical elements of friction pair and air oxygen. Friction film is a determining factor for the antifriction material. It is connected with the nature of friction films. The films can minimize friction and ensure stability of a friction unit. It depends on the combination of chemical elements and oxygen in the films formed. The chemical composition of friction films not only allows ex-plaining the mechanism of their formation, but also gives the possibility to forecast and control the functional properties of bearing materials in wide range of printing machines under operating conditions. New composite bearings can be successfully used in the military equipment nodes, such as sliding divices nodes of artillery weapons.
Twórcy
autor
  • Publishing Printing Institute, National Technical University of Ukraine "Kyiv Polytechnic Institute", av.
autor
  • Publishing Printing Institute, National Technical University of Ukraine "Kyiv Polytechnic Institute", av.
autor
  • Publishing Printing Institute, National Technical University of Ukraine "Kyiv Polytechnic Institute", av.
autor
  • Publishing Printing Institute, National Technical University of Ukraine "Kyiv Polytechnic Institute", av.
Bibliografia
  • 1. Roik T.A., Kyrychok P.O., Gavrish A.P., Composite Bearing Materials for increased operating conditions, Monograph, NTUU “КPІ”, Kyiv (2007), 404 p., (in Ukrainian).
  • 2. KaczmaJ.W. r, Pietrzak K., Wlosinski W., The production and application of metal matrix composite materials,[in:] “Journal of Materials Processing Technology”, Elsevier Science, Volume 106, Issues 1-6, 2000, pp. 58-67, (in English).
  • 3. Liang Jian, Dang Sheng Xiong, Tribological properties of nickel-based self-lubricating composite at elevated temperature and counterface material selection [in:] “Wear”, Volume 265, Issues 3-4, 2008, pp. 533-539 (in English).
  • 4. Roik T., Gavrish A., Kyrychok P., Vitsuk Yu., Askerov M., Phisical Mechanical And Tri-botechnical Properties Of New Composite Bearings For Printing Equipment, [in:] “Journal of Science of the Gen. Tadeusz Kościuszko Military Academy of Land Forces”, Wroclaw, Poland, no. 2(172), 2014.-pp. 141-149.
  • 5. Roik T.A., A.P. Gavrish, P.O. Kyrychok, et al., Composite Bearing Material, Ukrainian Patent No. 60521, IPC (2009), C22C9/02, Bulletin No. 12, Publ. June 25 (2011), (in Ukrainian).
  • 6. Roik T.A., V.V. Kholyavko, Yu.Yu. Vitsuk, et al., Influence of mechanism tribosynthesis of secondary structures for properties of antifriction composites materials based on nickel, [in:] “Met. Fiz. Nov. Tekhn.”, 31, (2009), pp. 1001–1016, (in English).
  • 7. Konopka K., Roik T. A., Gavrish A. P., et al., Effect of CaF2 surface layers on the friction behavior of copper-based composite [in:] “Powder Metallurgy and Metal Ceramics”, Springer New York, Volume 51, Number 5-6, (2012), p.p. 363-367, (in English).
  • 8. Wejrzanowski T., Computer program Micrometer, “Mater. Sci.”, Number 23, (2005), pp. 28–34, (in English).
  • 9. Jianxin D. and Tongkun C., Self-lubricant mechanisms via the in situ formed tribofilm of sintered ceramics with CaF2 additions when sliding against hardened steel, [in:] J. Refract. Met. Hard Mater., vol. 25, no. 2, (2007), pp. 189–197, (in English).
  • 10. Gavrish A. P., Melnik O.A., Roik T.A., Askerov M.G., Gavrish O.A., New finishing technologies of composite sliding bearings for heavy-duty exploitation conditions, Monograph, NTUU “КPІ”, Kyiv (2012), pp. 196, (in Ukrainian).
Uwagi
Opracowanie ze środków MNiSW w ramach umowy 812/P-DUN/2016 na działalność upowszechniającą naukę.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ad6c5d40-a089-4277-9acf-80be25eef726
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.