Experimental Investigation of the Structural Performance of Concrete Containing Cellulose Fibers and the Anti-corrosive Effect of Green Corrosion Inhibitors

• Autorzy: Ramshankar Pushpanathan , Ganeshan Pushpanathan , Raja Kandhasamy , NagarajaGanesh Balasubramanian

Identyfikatory

DOI

10.59440/ceer/187189

• Języki publikacji: EN

Abstrakty

EN

This research was aimed to find the structural behaviour of Calotropis procera fibres added concrete and the effect of Azadirachta indica leaf slurry blended to concrete and exposed to seawater. Conventional and fibre reinforced concrete samples fabricated keeping the curing time as 7, 14 and 28 dayswere subjected to compression, split tensile, rebound hammer and ultrasonic pulse velocity test. Increase in curing time increased the structural properties and Calotropis procerafibres added samples produced respectively 19.5%, 15%, 10.3 and 14.5% improvement in the compression, tensile, rebound hammer and ultrasonic pulse velocity values. These fibres reduced the brittleness of the specimen and avoided unprecedented failures. Accelerated corrosion and gravimetric mass loss test conducted to estimate the anti-corrosive property of Azadirachta indica leaf slurry showed decrease in corrosion rate. The corrosion rate of concrete samples without and with inhibitors was 0.0654 ± 0.008 and 0.056 ± 0.011 mm/year respectively evincing the anti-corrosive effects of Azadirachta indica leaves. Thus green materials are compatible with concrete and can be used in making sustainable concrete structures.

Słowa kluczowe

EN

fibres; fibre reinforced concrete; structural properties; corrosion test; corrosion inhibitors

PL

włókna; beton zbrojony włóknami; właściwości konstrukcyjne; test korozji; inhibitory korozji

• Wydawca: Oficyna Wydawnicza Uniwersytetu Zielonogórskiego
• Czasopismo: Civil and Environmental Engineering Reports
• Rocznik: 2024
• Tom: Vol. 34, no. 2
• Strony: 22--44
• Opis fizyczny: Bibliogr. 67 poz., il., tab., wykr.

Twórcy

autor

Ramshankar Pushpanathan

• Department of Civil Engineering, University College of Engineering, Dindigul, Tamil Nadu, India

autor

Ganeshan Pushpanathan

• Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore, Tamil Nadu, India

autor

Raja Kandhasamy

• Department of Mechanical Engineering, University College of Engineering, Dindigul, Tamil Nadu, India

autor

NagarajaGanesh Balasubramanian

• Department of Mechanical Engineering, Anna University, Chennai, Tamil Nadu, India

Bibliografia

• 1. Aslam, M, Sha, P, Zamin, M 2016. Oil-palm by-products as lightweight aggregate in concrete mixture: a review. Journal of Cleaner Production 03, 56-73.
• 2. Herscovici, HL, Roehl, D, Sánchez Filho, E, de S 2019. Experimental studies of short concrete reinforced steel fibre beams under bending. Revista IBRACON de Estruturas e Materials12(2), 288-307.
• 3. Patel, V, Singh, B, Arora, VV et al. 2020. Study on fracture behavior of high strength concrete including effect of steel fibre. Indian Concrete Journal 94(4),1-9.
• 4. Arora, VV, Singh, B, Patel, V 2019. Stress–Strain Behaviour and Performance Evaluation of High Strength Steel Fibre Reinforced Concrete. Indian Concrete Journal 93(12), 54-61.
• 5. Pacheco-Torgal, F, Jalali, S 2011. Cementitious building materials reinforced with vegetable fibres: A review. Construction and Building Materials 25, 575-581.
• 6. Alexandridou, C, Angelopoulos, GN, Coutelieris, FA 2018. Mechanical and durability performance of concrete produced with recycled aggregates from Greek construction and demolition waste plants. Journal of Cleaner Production 176, 745-757.
• 7. Kriker, A, Debicki, G, Bali, A et al. 2005. Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate. Cement and Concrete Composites 27(5), 554-564.
• 8. Yazıcı, Şemsi, Gozde Inan, and Volkan Tabak 2007. Effect of aspect ratio and volume fraction of steel fibre on the mechanical properties of SFRC. Construction and Building Materials 21, 1250-1253.
• 9. Tian, H, Zhang, YX 2016. The influence of bagasse fibre and fly ash on the long-term properties of green cementitious composites. Construction and building materials 111, 237-250.
• 10. Sadiqul Islam, GM, Das Gupta, S 2016. Evaluating plastic shrinkage and permeability of polypropylene fibre reinforced concrete. International Journal and Sustainable Built Environment 5,345-354.
• 11. Shi, F, Pham, TM, Hao, H, Hao, Y 2020. Post-cracking behaviour of basalt and macro polypropylene hybrid fibre reinforced concrete with different compressive strengths Construction and Building Materials 262, 120108.
• 12. Zakaria, M, Ahmed, M, Hoque, M et al. 2020. Comparative study of the mechanical properties of jute fibre and yarn reinforced concrete composites. Journal of Natural Fibers 17, 676-687.
• 13. De Klerk, MD, Kayondo, M, Moelich, GM, De Villiers, WI, Combrinck, R and Boshoff, WP 2020. Durability of chemically modified sisal fibre in cement-based composites. Construction and Building Materials 241, 117835.
• 14. NagarajaGanesh, B, Rekha, B 2020. Intrinsic cellulosic fibre architecture and their effect on the mechanical properties of hybrid composites. Archives of Civil and Mechanical Engineering 20 (4), 125.
• 15. Prasanthi, PP, Babu, KS, Kumar, MS et al. 2021.Analysis of sisal fibre waviness effect on the elastic properties of natural composites using analytical and experimental methods Journal of Natural Fibres18, 1675-1688.
• 16. Hosseinimehrab E, Sadeghi A, Farsangi EN 2021, Finite Element Modeling of Self-Compacting Concrete Beams Under Shear. Civil and Environmental Engineering Reports 31(4),1-16.
• 17. Nadi, S, Beheshti Nezhad, H and Sadeghi A 2022. Experimental study on the durability and mechanical properties of concrete with crumb rubber. Journal of Building Pathology and Rehabilitation 17, 1-12.
• 18. Jamshaid, H, Mishra, RK, Raza et al. 2022. Natural Cellulosic Fibre Reinforced Concrete: Influence of Fibre Type and Loading Percentage on Mechanical and Water Absorption Performance. Materials15(3), 874-885.
• 19. Kherraf L, Kherraf S, Hebhoub H, Belachia M 2023, Performance of Concrete Containing Partial Granite and Tiling Wastes as Fine Aggregate. Civil and Environmental Engineering Reports 33(2), 85-105.
• 20. Ahmad, J, Zhou, Z and Deifalla, AF 2023. Structural properties of concrete reinforced with bamboo fibres: a review. Journal of Materials Research and Technology 24, 844-865.
• 21. Hasan, NMS, Shaurdho, NMN, Basit, MA, Paul, SC, Sobuz, MHR and Miah, MJ 2023. Assessment of the rheological and mechanical properties of palmyra fruit mesocarp fibre reinforced eco-friendly concrete. Construction and Building Materials 407, 133530.
• 22. Pradhan, B, and Bhattacharjee, B 2009. Performance evaluation of rebar in chloride contaminated concrete by corrosion rate. Construction and building materials 23(6), 2346-2356.
• 23. Ormellese, MARCO, Bolzoni, FABIO, Goidanich, SARA, Pedeferri, MP and Brenna, ANDREA 2011. Corrosion inhibitors in reinforced concrete structures Part 3-migration of inhibitors into concrete. Corrosion Engineering, Science and Technology 46(4), 334-339.
• 24. Jain, R, Kotha, A, Bhadu, MK, Choudhary, SK, Sairullah, M, Rout, AK, Rout TK 2014. Pickling inhibition efficiency of extracts of Azadirachta indica and Momordica charantia acidic medium on steel, Tata Search 2, 159-168.
• 25. Ajanaku KO, Aladesuyi O, Ajanaku CO, Adedapo EA, Akiusiku AA, Sodiya FE 2015. Adsorption properties of Azadirachta indica extract on corrosion of aluminium in 1.85 M hydrochloric acid. Journal of International Association of Advanced Technology and Science16, 4.
• 26. Miri, M, Ghasemi, MR, Beheshti Nezhad, H 2019. Experimental Investigation of Corrosion Cracking in Reinforced Concrete Beams Containing Nano Wollastonite. Journal of Rehabilitation in Civil Engineering 7(3), 117-138.
• 27. Kharma, KM, Ahmad, S, Al Osta, MA, Maslehuddin, M, Al-Huri, M, Khalid, H, Al-Dulaijan, SU 2022. Experimental and analytical study on the effect of different repairing and strengthening strategies on flexural performance of corroded RC beams. Structures, 46, 336-352.
• 28. Kumar, H, Yadav, V and Kumari, A 2022. Adsorption, corrosion inhibition mechanism, and computational studies of Azadirachta indica extract for protecting mild steel: Sustainable and green approach. Journal of Physics and Chemistry of Solids, 165, 110690.
• 29. Tiwari, AK, Goyal, S and Luxami, V 2023. Influence of corrosion inhibitors on two different concrete systems under combined chloride and carbonated environment. In: Structures, 48. 717-735.
• 30. Tian, Y, Bao, J, Xie, D, Wang, B, Zhang, P, Zhao, T and Lei, D 2023. The effects of organic corrosion inhibitor on concrete properties and frost resistance. Journal of Building Engineering 65.105762.
• 31. Yoganandam, K, Ganeshan, P, NagarajaGanesh, B, Raja, K 2019. Characterization studies on Calotropis procera fibres and their performance as reinforcements in epoxy matrix. Journal of Natural Fibers 17, 1706-1718.
• 32. NagarajaGanesh, B, Rekha, B, Yoganandam, K 2021. Assessment of thermal insulation and flame retardancy of cellulose fibres reinforced polymer composites for automobile interiors. Journal of Natural Fibres 19(15), 11021-11029.
• 33. Rajkohila, A and Chandar, SP 2024. Assessing the effect of natural fibre on mechanical properties and microstructural characteristics of high strength concrete. AIN Shams Engineering Journal, 102666.
• 34. Specification for Coarse aggregate and Fine aggregate from “Natural Sources for Concrete”, Bureau of Indian Standard, New Delhi, IS 383: 1970.
• 35. Recommended Guidelines for Concrete Mix design, Bureau of Indian Standard, New Delhi: IS 10262: 1982.
• 36. Mirmiran, A, Wei, Y 2001. Damage assessment of FRP-encased concrete using ultrasonic pulse velocity. Journal of Engineering Mechanics; 127(2), 126-135.
• 37. Indian Standards 1199 – 1959: Methods of Sampling and analysis of concrete. Bureau of Indian Standards (BIS), New Delhi. 38. Indian Standards 4031-1988: Methods of physical tests for hydraulic cement, Bureau of Indian Standards (BIS), New Delhi.
• 39. Indian Standards 5816-1999: Method of test splitting tensile strength, Bureau of Indian Standards (BIS), New Delhi.
• 40. Indian Standards 13311 (Part-2) (1992) Methods of Non Destructive Testing of Concrete: Part-2: Rebound Hammer.
• 41. Raju, MVS, Naik, KA, Kumar, KC and Srinivasa Rao S 2023. Efficacy of an organic–inorganic hybrid phosphorus compound in corrosion mitigation of reinforcement steel in concrete. I. Gravimetric and electrochemical analysis. Phosphorus, Sulfur, and Silicon and the Related Elements 198(8), 645-654.
• 42. ASTM G1 - 03 2011 Standard practice for preparing, cleaning, and evaluating corrosion test specimens.
• 43. Aruna, M 2014. Mechanical Behaviour of Sisal Fibre Reinforced Cement Composites. World Academy of Science Engineering and Technology8(4), 650-653.
• 44. Sabarinathan, S 2017. A Study on Mechanical Properties of Sisal Fibre Reinforced Concrete. SSRG International Journal of Civil Engineering. 2:16-20.
• 45. Messas, T, Achoura, D, Abdelaziz, B and Mamen, B 2022. Experimental investigation on the mechanical behavior of concrete reinforced with Alfa plant fibres. Frattura ed IntegritàStrutturale. 16(60),102-113.
• 46. NagarajaGanesh, B, Sugumaran, P and Sridhar, R 2012. Mechanical properties of rice straw and chicken feather fibres. International Journal of Composite Materials and Manufacturing, 2, 22-26.
• 47. Dehane S, Kriker A, Salhi, A 2023. Influence of Saline treated Wastewater on Properties of Concrete: An Experimental Study, Periodica Polytechnica Civil Engineering 67(3),695-705.
• 48. Chai, L, Guo, L, Chen, B et al. 2020. Effects of curing age on compressive and tensile stress-strain behaviors of ecological high ductility cementitious composites. Journal of Southeast University (English Edition). 36 (1), 73-80.
• 49. Ali, M, Liu, A, Sou, H et al. 2012. Mechanical and dynamic properties of coconut fibre reinforced concrete. Construction and BuildingMaterials. 30, 814-825.
• 50. Murthi, P, Poongodi, K, Gobinath, R et al. 2020. Evaluation of material performance of coir fibre reinforced quaternary blended concrete. In IOP Conference Series: Materials Science and Engineering 872(1), 012133.
• 51. Bharadwaj, K, Isgor, OB, Weiss, WJ et al. 2022. New Mixture Proportioning Method for Performance-Based Concrete. ACI Materials Journal 119(2), 207-220.
• 52. Aluko, OG, Yatim, JM, Kadir et al. 2020. A review of properties of bio-fibrous concrete exposed to elevated temperatures. Construction and Building Materials 260;119671.
• 53. Zhang, H, Pan, Q, Zheng, K, Jin, C and Pan, L 2022. Mesoscale Study on Splitting Tensile Damage Characteristics of Concrete Based on X-ray Computed Tomography and Digital Image Correlation Technology. Materials 15(13), 4416.
• 54. Theodoros A, Chrysanidis, Vassilis P, Panoskaltsis 2022. Experimental investigation on cracking behavior of reinforced concrete tension ties, Case Studies in Construction Materials 16, e00810.
• 55. NagarajaGanesh, B and Rekha, B 2019. Morphology and damage mechanism of lignocellulosic fruit fibres reinforced polymer composites: A comparative study. SN Applied Sciences,1, 1-11.
• 56. Li, Weiwen, Meizhong Wu, Tiansheng Shi, Pengfei Yang, Zejie Pan, Wei Liu, Jun Liu, and Xu Yang 2022. Experimental Investigation of the Relationship between Surface Crack of Concrete Cover and Corrosion Degree of Steel Bar Using Fractal Theory. Fractal and Fractional 6, 325.
• 57. Hassiba, B, Mekki, M, Fraid, R 2018. The relationship between the compressive strength and ultrasonic pulse velocity concrete with fibres exposed to high temperatures. International Journal of Energetica 3(1), 31-36.
• 58. Razmi A, Mirsayar MM 2017. On the mixed mode I/II fracture properties of jute fiber-reinforced concrete. Construction and Building Materials148, 512-520.
• 59. Jamshaid, H, Ali, H, Mishra, RK, Nazari, S and Chandan, V 2023. Durability and Accelerated Ageing of Natural Fibers in Concrete as a Sustainable Construction Material. Materials 16(21), 6905.
• 60. Rao, PR and Ramakrishna, G 2021. Experimental Investigation on Mechanical Properties of Oil Palm Empty Fruit Bunch Fiber Reinforced Cement Mortar. Materials Today: Proceedings 46,471-477.
• 61. Palanisamy, SP, Maheswaran, G, Selvarani, AG, Kamal, C and Venkatesh G 2018. Ricinus communis - A green extract for the improvement of anti-corrosion and mechanical properties of reinforcing steel in concrete in chloride media. Journal of Building Engineering 19, 376-383.
• 62. Weipeng Feng, Anel Tarakbay, Shazim Ali Memon, Waiching Tang, Hongzgi Cui, 2021, Methods of Accelerating chloride-induced corrosion in steel-reinforced concrete: A comparative review, Constructions and Building Materials 289, 123165.
• 63. Altoubat, S, Maalej, M, Shaikh FAU 2016. Laboratory Simulation of Corrosion Damage in Reinforced Concrete, International Journal of Concrete Structures and Materials10(3), 383-391.
• 64. Yang, HM, Zhang, SM, Wang, L, Chen, P, Shao, DK, Tang, SW and Li, JZ 2022. High-ferrite Portland cement with slag: Hydration, microstructure, and resistance to sulfate attack at elevated temperature. Cement and Concrete Composites130, 104560.
• 65. Ibrahim, M, Rahman, MK, Johari, MAM, Nasir, M and Oladapo, EA 2020. Chloride diffusion and chloride-induced corrosion of steel embedded in natural pozzolan-based alkali activated concrete. Construction and Building Materials 262,120669.
• 66. Tian, Y, Bao, J, Xie, D, Wang, B, Zhang, P, Zhao, T and Lei, D 2023. The effects of organic corrosion inhibitor on concrete properties and frost resistance. Journal of Building Engineering 65, 105762.
• 67. NagarajaGanesh, B and Rekha, B 2019. Effect of mercerization on the physico-chemical properties of matured and seasoned Cocos nucifera fibres for making sustainable composites. Materials Research Express 6(12), 125102.