Research of the question of increase of efficiency of cooling of the power equipment of hydroelectric power plants

• Autorzy: Cheilytko Andrii , Ilin Sergii
• Języki publikacji: EN

Abstrakty

EN

Improving the cooling efficiency of power transformer windings with a cross-sectional width of the radial channel less than 3 mm, by improving the geometric parameters of the cooling system while reducing the material consumption of the electric machine is an important area of research. Excess oil pressure in the winding channels increases with increasing serial number of the coil. It was found that with increasing oil velocity at the inlet to the horizontal channel, the values of excess pressure in it increase in quadratic degree. It is established that a lifting force occurs in the oil of the horizontal channel, as evidenced by the increase in excess pressure near the upper boundary of the channel. For the first time, an analytical dependence of the excess oil pressure in the radial channel of the disk winding of the power transformer on the oil flow rate at the inlet to this channel was obtained. The dependences of the excess pressure in horizontal channels with a cross-sectional width of 1 mm on the velocity of oil at the inlet to this channel were obtained, which allows to calculate the speed by which it is possible to organize through circulation of oil in the channel provided that excessive pressure in the channel is prevented. situations. A new mathematical model of interconnected heat exchange and hydrodynamic processes in the disk windings of a power transformer is proposed, which, unlike the existing ones, takes into account the width of the horizontal channel less than 3 mm, which allows to predict the heat distribution in the winding and determine possible locations overheating of coils and premature destruction of insulating materials.

Słowa kluczowe

EN

transformer; heat exchange; power equipment; hydroelectric power station; oil cooling system

• Wydawca: Kielce University of Technology
• Czasopismo: Journal of New Technologies in Environmental Science
• Rocznik: 2020
• Tom: Vol. 4, nr 1
• Strony: 22--29
• Opis fizyczny: Bibliogr. 16 poz., rys., wykr., wzory

Twórcy

autor

Cheilytko Andrii

• Zaporizhzhya National University, Ukraine

autor

Ilin Sergii

• Zaporizhzhya National University, Ukraine

Bibliografia

• [1] Mehta D., Kundu P., Jhala A. S., A review on criticale valuation of natural estervisavis mineral oil insulating liquid for use in transformers: Part 1. IEEE Transactions on Dielectrics and Electrical Insulation, 2016, No. 23 (2), pp. 873-880.
• [2] Mehta D., Kundu P., Jhala A. S., A review on criticale valuation of natural estervisavis mineral oil insulating liquid for use in transformers: Part 2. IEEE Transactions on Dielectrics and Electrical Insulation, 2016, No. 23 (3), pp. 1705-1712.
• [3] Janura R., Gutten M., Korenciak D., Thermal processes in materials of oil transformers. Diagnostic of Electrical Machines and Insulating Systems in Electrical Engineering, 2016, No. 1, pp. 14-19.
• [4] Bashirov M. G., Minlibayev M. R., Hismatullin A. S., Increase of efficiency of cooling of the power oil transformers. Oil and Gas Business, 2014, No. 2, pp. 358-367.
• [5] Lashbrook M., Gyore A., Martin R., Review of the electrical and thermal behaviour of ester-based dielectric liquids for extra high voltage applications. Electrical Insulation Conference, 2017, No. 13, pp. 367-380.
• [6] Kalić D., Radaković Z., Lazarević Z., On the determination of characteristic temperatures in power oil transformers during transient states. Archiv für Elektrotechnik, 1993, No. 76, pp. 457-468.
• [7] Koshlak H. V., Cheilytko A. O., Investigation of effective thermal conductivityin porous metallic materials. Journal of New Technologies in Environmental Science, 2019, V. 3 (No. 3), pp. 112-122.
• [8] Del Vecchio R., Poulin B., Feghali P., Transformer Design Principles With Applications 3e, Boca Raton: CRC Press, 2017, 612 р.
• [9] Franklin A. C., Franklin D. P., The J and P transformer book: a practical technology of the power transformer. London: Butterworths, 2016, 815 p.
• [10] Pavlenko A. A. , Nadrygailo T. Zh., On one simulation method of turbulent flows. Journal of New Technologies in Environmental Science, 2019, V. 3 (No. 3), pp. 169-179.
• [11] Radakovic Z., Numerical determination of characteristic temperatures in directly loaded power oil transformer. International Transactions on Electrical Energy Systems, 2003, No. 13, pp. 47-54.
• [12] Zhang J., Li X., Vance M., Experiments and modeling of heat transfer in oil transformer winding with zigzag cooling ducts. Applied Thermal Engineering, 2008, Т. 28, No. 1, pp. 36-48.
• [13] Dai J., Wang Z. D., Jarman P., Moisture and aging effect on the creepage discharge characteristics at the oil/transformer-board interface under divergent field. Electrical Insulation and Dielectric Phenomena, Annual Report Conference on 2008, pp. 662-665.
• [14] Eschenroeder A. Q., Faeder E. J., A Monte Carlo Analysis of Health Risks from PCB-Contaminated Mineral Oil Transformer Fires. Risk Analysis, 1988, Т. 8, No. 2, pp. 291-297.
• [15] Marulanda A. R. et al., Study of the vegetal oil as a substitute for mineral oils in distribution transformer. Transmission and Distribution Conference and Exposition: Latin America, 2008, pp. 1-6.
• [16] Zhang Y. et al., An artificial neural network approach to transformer fault diagnosis. IEEE Transactions on Power Delivery, 1996, Т. 11, No. 4, pp. 1836-1841.

Uwagi

PL

Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2020).