A concept of a test stand for the investigation of a 3D printed turbochargers and selected fluid-flow machinery

• Autorzy: Andrearczyk A. , Żywica G.
• Języki publikacji: EN

Abstrakty

EN

The paper describes the general concept of using the rapid prototyping methods and their application tomanufacturing of selected components of rotating machinery. Chosen rapid prototyping technology (multijet printing) allows precise manufacture of rotor models with complex geometry, without the need for their further processing. The research is planned to be performed on designed test rig, which is described in the paper. 3D printed elements will be pretested using air from a high performance compressor. Basic preliminary testing and own experience has shown that this technology is faster, cheaper and more accurate than conventional manufacturing. This fact can significantly contribute to the development of production and research of prototypical fluid-flow machines. The tensile strength testing of the two materials which are used in a 3D printer in different printing directions has been also discussed.

Słowa kluczowe

EN

rapid prototyping; polymeric resin; fluid-flow machine

• Wydawca: Wydawnictwo Instytutu Maszyn Przepływowych PAN
• Czasopismo: Transactions of the Institute of Fluid-Flow Machinery
• Rocznik: 2016
• Tom: nr 133
• Strony: 3--11
• Opis fizyczny: Bibliogr. 9 poz., rys.

Twórcy

autor

Andrearczyk A.

• Department of Turbine Dynamics and Diagnostics, Institute of Fluid Flow Machinery, Polish Academy of Sciences, 80-231 Gdańsk, Fiszera 14, Poland
• Gdańsk University of Technology, Narutowicza 11/12, 80-233 Gdańsk, Poland

autor

Żywica G.

• Department of Turbine Dynamics and Diagnostics, Institute of Fluid Flow Machinery, Polish Academy of Sciences, 80-231 Gdańsk, Fiszera 14, Poland

Bibliografia

• [1] Wichniarek R., Górski F., Kuczko W.: Rapid prototyping in the design process. Projektowanie i Konstrukcje Inżynierskie 6(2014), 81, 26–29 (in Polish).
• [2] Lin E., Yaning L., Ortiz C., Boyce M.C.: 3D printed, bio-inspired prototypes and analytical models for structured suture interfaces with geometrically-tuned deformation and failure behaviour. J. Mech. Phys. Solids 73(2014), 166–182.
• [3] Górski F., Kuczko W., Wichniarek R.: Reconstitution of worn or damaged machine elements by means of reverse engineering and rapid prototyping techniques. Inżynieria Maszyn 18(2013), 1, (in Polish).
• [4] Jin G.Q., Li W.D., Gao L.: An adaptive process planning approach of rapid prototyping and manufacturing. Robot. Com.-Int. Manuf. 29(2013), 23–38.
• [5] Guosong W., Jihua L., Ashish K., Yuchun H., Wenyang L., Jing H.: CAD/CAM and rapid prototyped titanium for reconstruction of ramus defect and condylar fracture caused by mandibular reduction. Oral Surg., Oral Med., O 113(2012), 356–361.
• [6] Chiang T.H., . Hsieh T. E:A study of monomer’s effect on adhesion strength of UV-curable resins. Int. J. Adhes. Adhes. 26(2006), 520–531.
• [7] Wozniak M., Yoram de Hazan, Graule T., Kata D.: Rheology of UV curable colloidal silica dispersions for rapid prototyping applications. J. Eur. Ceram. Soc. 31(2011), 2221–2229.
• [8] Andrearczyk A.: The application of a photopolymer material for the manufacture of machine elements using rapid prototyping techniques. Logistyka (2015), 4, 8628.
• [9] Data sheet for the material called VisiJet m3 Crystal: http://www.3dsystems.com/ru/materials/visijet-m3-crystal