PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Badania materiałów włókienniczych w zakresie ich zdolności do transportu wilgoci

Autorzy
Treść / Zawartość
Identyfikatory
Warianty tytułu
EN
Investigations of moisture transport of textile materials
Języki publikacji
PL
Abstrakty
PL
Celem badań była ocena materiałów włókienniczych w zakresie przepuszczalności pary wodnej, będącej jedną z podstawowych właściwości materiałów włókienniczych z punktu widzenia ich zdolności do zapewnienia komfortu fizjologicznego. Badaniom poddano 29 próbek tkanin bawełnianych i bawełnianopodobnych o zróżnicowanej strukturze. Badania parametrów charakteryzujących przepuszczalność pary wodnej materiałów włókienniczych wykonano za pomocą zaizolowanej cieplnie pocącej się płyty oraz Permetestu. Oceniono zgodność wyników uzyskanych za pomocą obu metod pomiaru.
EN
The aim of the presented work is to investigate textile materials from the point of view of their ability to transport the moisture. The water-vapour permeability is one of the most important comfort-related properties of textiles. It determines an ability to keep a human body dry and ensures natural body thermoregulation. There are some parameters expressing the ability of textile to transfer the moisture. The water-vapour resistance can be considered as one of the most important ones. It can be determined with the sweating guarded-hotplate test called “skin model” and the Permetest. Both instruments enable also measurement of other parameters character-izing the textile materials from the point of view of the moisture transport. In the presented work the “skin model” and Permetest were applied to measure the water-vapour permeability of 29 samples of cotton woven fabrics of different structure. The diversification of fabric structure was achieved by changing the linear density of weft as well as the number of picks and ends. On the basis of the measurement results an agreement between the results from the “skin model” and Permetest was assessed. It was stated that there was strong correlation between the water-vapour resistance from the “skin model” and the Permetest (Table 1). The strong correlation also exists between the water-vapour permeability according to the “skin model” and parameters determined with the Permetest: the water-vapor resistance and the percentage water –vapor permeability (Fig. 3). The values of the water-vapor resistance according to the Permetest are higher than those of the same parame-ter determined with the “skin model” (Fig. 4).
Wydawca
Rocznik
Strony
481--484
Opis fizyczny
Bibliogr. 8 poz., rys., tab., wzory
Twórcy
autor
  • Katedra Odzieżownictwa i Tekstroniki Politechniki Łódzkiej, ul. Żeromskiego 116, 90-924 łódź
Bibliografia
  • [1] Norma międzynarodowa ISO 7730 1984, Moderate thermal environments -- Determination of the PMV and PPD indices and specification of the conditions for thermal comfort.
  • [2] Matusiak M.: Thermal Comfort Index as a Method of Assessing the Thermal Comfort of Textile Materials, Fibres And Textiles in EE 201, Vol. 18, No. 2 (79), s. 45–50.
  • [3] Polska Norma PN-EN 31092, Tekstylia. Wyznaczanie właściwości fizjologicznych. Pomiar oporu cieplnego i oporu pary wodnej w warunkach stanu ustalonego (metoda pocącej się zaizolowanej cieplnie płyty).
  • [4] Hes L., Dolezal I.: A New Portable Computer-controlled Skin Model for Fast Determination of Water Vapour and Thermal Resistance of Fabrics, Asian Textile Conference ATC 7, New Delhi, 2003.
  • [5] Matusiak M.: Badania właściwości termoizolacyjnych tkanin odzieżowych, Pomiary Automatyka Kontrola, 2010, Nr 8, Vol. 56, ISSN 0032-4140, s. 901–904.
  • [6] Hes L., Loghin C.: Heat, Moisture and Air Transfer Properties of Selected Woven Fabrics in Wet State, Journal of Fiber Bioengineering and Informatics, s. 141–149.
  • [7] Wang L. C.,, Chang Y. C., Yang-Cheng Shih Y. C.: The Evaluation of Moisture Management Fabrics, Fiber Society Spring’2012 Conference, St. Gallen (Szwajcaria), 2012.
  • [8] Sikorski K., Matusiak M.: Investigation of innovative fibres with “moisture management” function, 10th Joint International Conference CLOTECH’2012, Warszawa.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ac6cba42-e498-410c-b68b-aca72ee4a8d9
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.