New insights into reliability problems for supply chains management based on conventional reliability model

Jia, X.; Cui, L.; Xing, L.

doi:10.17531/ein.2018.3.16

Artykuł - szczegóły

Tytuł artykułu

New insights into reliability problems for supply chains management based on conventional reliability model

Autorzy

Jia X. , Cui L. , Xing L.

Treść / Zawartość

Pełne teksty:

Pobierz

Identyfikatory

DOI

10.17531/ein.2018.3.16

Warianty tytułu

Nowe spojrzenie na problemy związane z niezawodnością w zarządzaniu łańcuchami dostaw z punktu widzenia tradycyjnego modelu niezawodności

Języki publikacji

Abstrakty

The paper aims to find the relationship between conventional reliability and supply chain reliability, and introduce and adapt conventional reliability models to the field of supply chains, expanding the horizon of solving supply chain reliability problems. Based on a comprehensive literature review, the paper summarizes definitions of reliability in supply chain systems and presents reliability system structures and reliability indexes for supply chains. Relationship and differences between conventional reliability and supply chain reliability are shown. Illustrative examples such as the supply chain reliability problem in China are provided to show how to convert a supply chain reliability problem into a conventional reliability problem and then solve it using reliability techniques in conventional reliability.

Celem artykułu jest znalezienie związku między niezawodnością w ujęciu tradycyjnym a niezawodnością łańcuchów dostaw, a także wprowadzenie i dostosowanie tradycyjnych modeli niezawodności do badań nad łańcuchami dostaw, co pozwoli na rozszerzenie możliwości rozwiązywania problemów dotyczących niezawodności tych ostatnich. W oparciu o obszerny przegląd literatury, w artykule przedstawiono pokrótce definicje niezawodności w systemach łańcucha dostaw oraz omówiono struktury systemów niezawodnościowych i wskaźniki niezawodności dla łańcuchów dostaw. Pokazano zależności i różnice między niezawodnością w rozumieniu tradycyjnym a niezawodnością łańcucha dostaw. Przedstawiono przykład problemu niezawodności łańcucha dostaw zaczerpnięty z realiów chińskich, ilustrujący jak można przekształcić problem niezawodności łańcucha dostaw w tradycyjny problem niezawodnościowy, a następnie rozwiązać go za pomocą technik niezawodnościowych stosowanych w tradycyjnej analizie niezawodności.

Słowa kluczowe

supply chain management conventional reliability supply chain reliability reliability system structures reliability indexes

zarządzanie łańcuchami dostaw niezawodność w ujęciu tradycyjnym niezawodność łańcucha dostaw struktury systemu niezawodności wskaźniki niezawodności

Wydawca

Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne

Czasopismo

Eksploatacja i Niezawodność

Rocznik

2018

Tom

Vol. 20, no. 3

Strony

465--470

Opis fizyczny

Bibliogr. 50 poz., rys.

Twórcy

autor

Jia X.

jiaxujie@126.com

School of Science, Minzu University of China, Beijing, China. 100081
Electrical& Computer Engineering Department, University of Massachusetts, Dartmouth, MA 02747, USA

autor

Cui L.

lirongcui@bit.edu.cn

School of Management & Economics, Beijing Institute of Technology, Beijing, China, 100081

autor

Xing L.

lxing@umassd.edu

School of Mechanical and Electrical Engineering, University of Electronic Science and Technology of China, Chengdu, China, 611731
Electrical & Computer Engineering Department, University of Massachusetts, Dartmouth, MA 02747, USA

Bibliografia

1. AS/NZS ISO 8402:1994 Quality management and quality assurance - Vocabulary standard. Australian/New Zealand Standards, 1994.
2. Balan S, Vrat P, Kumar P. A strategic decision model for the justification of supply chain as a means to improve national development index. International Journal of Technology Management 2007; 40(1-3): 69-86, https://doi.org/10.1504/IJTM.2007.013527.
3. Beamon B M. Supply chain design and analysis: Models and methods. International Journal of Production Economics 1998; 55(3): 281-294, https://doi.org/10.1016/S0925-5273(98)00079-6.
4. Bottani E, Rizzi A. An adapted multi-criteria approach to suppliers and products selection—An application oriented to lead-time reduction.International Journal of Production Economics 2008; 111(2): 763-781, https://doi.org/10.1016/j.ijpe.2007.03.012.
5. Brumnik R, Iztok P, Mojca F P. Markov Chains Modelling for Biometric System Reliability Estimations in Supply Chain Management. Sensor Letters 2013; 11(2): 377-383, https://doi.org/10.1166/sl.2013.2133.
6. Bueno-Solano A, Cedillo-Campos M G, Cantú J M V. Reliability of the supply chain: method of self-assessment as a first step to building resilient systems. International Journal of Combinatorial Optimization Problems and Informatics 2016; 7(1): 3-9.
7. Bundschuh M, Klabjan D, Thurston D L. Modeling robust and reliable supply chains. Optimization Online e-print, 2003.
8. Chen G, Sun X, Hu H, et al. Research on modeling and algorithm of supply chain's reliability based on CCFSM. Journal of Coastal Research 2015; 73(sp1): 99-103, https://doi.org/10.2112/SI73-018.1.
9. Christy D P, Grout J R. Safeguarding supply chain relationships. International Journal of Production Economics 1994; 36(3): 233-242, https://doi.org/10.1016/0925-5273(94)00024-7.
10. Gurnani H, Shi M. A bargaining model for a first-time interaction under asymmetric beliefs of supply reliability. Management Science 2006; 52(6): 865-880, https://doi.org/10.1287/mnsc.1050.0498.
11. Hsu C I, Li H C. Reliability evaluation and adjustment of supply chain network design with demand fluctuations. International Journal of Production Economics 2011; 132(1): 131-145, https://doi.org/10.1016/j.ijpe.2011.03.020.
12. Huan S H, Sheoran S K, Wang G. A review and analysis of supply chain operations reference (SCOR) model. Supply Chain Management: An International Journal 2004; 9(1): 23-29, https://doi.org/10.1108/13598540410517557.
13. Huang S H, Sheoran S K, Keskar H. Computer-assisted supply chain configuration based on supply chain operations reference (SCOR) model. Computers & Industrial Engineering 2005; 48(2): 377-394, https://doi.org/10.1016/j.cie.2005.01.001.
14. Jia X, Cui L. Reliability research of k-out-of-n: G supply chain system based on copula. Communications in Statistics-Theory and Methods 2012; 41(21): 4023-4033, https://doi.org/10.1080/03610926.2012.707736.
15. Karpak B, Kumcu E, Kasuganti R. An application of visual interactive goal programming: a case in vendor selection decisions. Journal of Multicriteria Decision Analysis 1999; 8(2): 93-105, https://doi.org/10.1002/(SICI)1099-1360(199903)8:2<93::AIDMCDA235>3.0.CO;2-#.
16. Lam C Y, Ip W H. An improved spanning tree approach for the reliability analysis of supply chain collaborative network. Enterprise Information Systems 2012; 6(4): 405-418, https://doi.org/10.1080/17517575.2012.673236.
17. Lan T, Shen F J. Research on Reliability of Supply Chain Using Fuzzy Theory. International Journal of Trade, Economics and Finance 2016; 7(3): 62-66, https://doi.org/10.18178/ijtef.2016.7.3.500.
18. Li,G, Zhang L J, Guan X, Zheng J J. Impact of decision sequence on reliability enhancement with supply disruption risks. Transportation Research. Part E, Logistics & Transportation Review 2016; 90(1): 25–38, https://doi.org/10.1016/j.tre.2015.09.008.
19. Li G, Zhang L, Guan X, et al. Impact of decision sequence on reliability enhancement with supply disruption risks. Transportation Research Part E: Logistics and Transportation Review 2016; 90: 25-38, https://doi.org/10.1016/j.tre.2015.09.008.
20. Liao Z, Rittscher J. A multi-objective supplier selection model under stochastic demand conditions. International Journal of Production Economics 2007; 105(1): 150-159, https://doi.org/10.1016/j.ijpe.2006.03.001.
21. Lin Y K. System reliability evaluation for a multistate supply chain network with failure nodes using minimal paths. IEEE Transactions on Reliability 2009; 58(1): 34-40, https://doi.org/10.1109/TR.2008.2011660.
22. Liu J, Li J, Zhao J. The research on supply chain reliability based on meta-graphs. Control and Automation, 2003. ICCA'03. Proceedings. 4th International Conference on. IEEE 2003; 849-853.
23. Lukinskiy V, Lukinskiy V, Churilov R. Problems of the supply chain reliability evaluation. Transport and Telecommunication Journal 2014; 15(2): 120-129, https://doi.org/10.2478/ttj-2014-0011.
24. Madadi A R, Kurz M E, Mason S J, et al. Supply chain design under quality disruptions and tainted materials delivery. Transportation Research Part E: Logistics and Transportation Review 2014; 67: 105-123, https://doi.org/10.1016/j.tre.2014.04.006.
25. Miao X, Yu B, Xi B. The uncertainty evaluation method of supply chain reliability. Transport 2009; 24(4): 296-300, https://doi.org/10.3846/1648-4142.2009.24.296-300.
26. Van Nieuwenhuyse I, Vandaele N. The impact of delivery lot splitting on delivery reliability in a two-stage supply chain. International Journal of Production Economics 2006; 104(2): 694-708, https://doi.org/10.1016/j.ijpe.2005.05.023.
27. Ohmori S, Yoshimoto K. A framework of managing supply chain disruption risks using network reliability. Industrial Engineering and Management Systems 2013; 12(2): 103-111, https://doi.org/10.7232/iems.2013.12.2.103.
28. Mettler T, Pinto R, Raber D. An intelligent supply chain design for improving delivery reliability. International Journal of Information Systems and Supply Chain Management (IJISSCM) 2012; 5(2): 1-20, https://doi.org/10.4018/jisscm.2012040101.
29. Pokharel S. A two objective model for decision making in a supply chain. International Journal of Production Economics 2008; 111(2): 378-388, https://doi.org/10.1016/j.ijpe.2007.01.006.
30. Quigley J, Walls L. Trading reliability targets within a supply chain using Shapley's value. Reliability Engineering & System Safety 2007; 92(10): 1448-1457, https://doi.org/10.1016/j.ress.2006.09.019.
31. Rausand M, Arnljot H Ã. System reliability theory: models, statistical methods, and applications. John Wiley & Sons, 2004.
32. Ren X L, Zhang G B. Reliability analysis of supply chain based on GO methodology. Applied Mechanics and Materials. Trans Tech Publications 2010; 34: 387-392.
33. Warburton R D H. An exact analytical solution to the production inventory control problem. International Journal of Production Economics 2004; 92(1): 81-96, https://doi.org/10.1016/j.ijpe.2003.09.014.
34. Saaty, T L. The analytical hierarchy process. Pittsburgh, RWS Publications, 1990.
35. Snyder L V, Daskin M S. Reliability models for facility location: the expected failure cost case. Transportation Science 2005; 39(3): 400-416, https://doi.org/10.1287/trsc.1040.0107.
36. Sohn S Y, Choi I S. Fuzzy QFD for supply chain management with reliability consideration. Reliability Engineering & System Safety 2001; 72(3): 327-334, https://doi.org/10.1016/S0951-8320(01)00022-9.
37. Thomas M U. Supply chain reliability for contingency operations. Reliability and Maintainability Symposium, 2002. Proceedings. Annual. IEEE 2002; 61-67.
38. Torabi S A, Baghersad M, Mansouri S A. Resilient supplier selection and order allocation under operational and disruption risks. Transportation Research Part E: Logistics and Transportation Review 2015; 79: 22-48, https://doi.org/10.1016/j.tre.2015.03.005.
39. Towill D R. Supply chain dynamics. International Journal of Computer Integrated Manufacturing 1991; 4(4): 197-208, https://doi.org/10.1080/09511929108944496.
40. Tzafestas S, Kapsiotis G. Coordinated control of manufacturing/supply chains using multi-level techniques. Computer Integrated Manufacturing Systems 1994; 7(3): 206-212, https://doi.org/10.1016/0951-5240(94)90039-6.
41. Varshney P K, Joshi A R, Chang P L. Reliability modeling and performance evaluation of variable link-capacity networks. IEEE Transactions on Reliability 1994; 43(3): 378-382, https://doi.org/10.1109/24.326429.
42. Voudouris V T. Mathematical programming techniques to debottleneck the supply chain of fine chemical industries. Computers & Chemical Engineering 1996; 20: S1269-S1274, https://doi.org/10.1016/0098-1354(96)00219-0.
43. Wang N, Lu J C, Kvam P. Reliability modeling in spatially distributed logistics systems. IEEE Transactions on Reliability 2006; 55(3): 525-534, https://doi.org/10.1109/TR.2006.879603.
44. Yamada T, Imai K, Nakamura T, et al. A supply chain-transport supernetwork equilibrium model with the behaviour of freight carriers. Transportation Research Part E: Logistics and Transportation Review 2011; 47(6): 887-907, https://doi.org/10.1016/j.tre.2011.05.009.
45. Ye X, Zhang J, Liu Y, et al. Study on the measurement of international knowledge flow based on the patent citation network. International Journal of Technology Management 2015; 69(3-4): 229-245, https://doi.org/10.1504/IJTM.2015.072971.
46. Zaitzev, E I, Bochazev, A A. Optimizing supply-planning in multi-level network structures in the light of reliability. Logistics and Supply Chain Management 2010; 2 (37).
47. Zhao X H, Zhu Z T, Liu W H, et al. Research on Reliability of Apparel Supply Chain Based on State Space. Advanced Materials Research. Trans Tech Publications 2013; 821: 815-818.
48. Zhou C, Chinnam R B, Korostelev A. Hazard rate models for early detection of reliability problems using information from warranty databases and upstream supply chain. International Journal of Production Economics 2012; 139(1): 180-195, https://doi.org/10.1016/j.ijpe.2012.04.007.
49. Shen Z J M. A profit-maximizing supply chain network design model with demand choice flexibility. Operations Research Letters 2006; 34(6): 673-682, https://doi.org/10.1016/j.orl.2005.10.006.
50. Nelsen R. An Introduction to Copulas. Springer-Verlag, New York 1999, https://doi.org/10.1007/978-1-4757-3076-0.

Typ dokumentu

Bibliografia

Identyfikator YADDA

bwmeta1.element.baztech-ac222ac5-ef78-443f-8b8d-3e3d9c3fd7fa