Modelling of components of resultant force during face milling

• Autorzy: Sekulić M. , Kovač P.
• Języki publikacji: EN

Abstrakty

EN

Cutting forces during face milling are investigated intensively analytically and experimentally. Some of previous approaches to cutting forces determination consider only main (tangential) cutting force component, and according to this define cutting power. The experimental investigations were performed during face milling with a goal to determine models of cutting force versus cutter revolution. Different models were determined according to the cutter approach to the workpiece during cutting angle of revolution.

Słowa kluczowe

EN

face milling; cutting forces

• Wydawca: Wydawnictwo Wrocławskiej Rady FSNT NOT
• Czasopismo: Journal of Machine Engineering
• Rocznik: 2008
• Tom: Vol. 8, No. 2
• Strony: 65--72
• Opis fizyczny: Bibliogr. 3 poz., rys.

Twórcy

autor

Sekulić M.

• University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg D. Obradovića 6, 21000 Novi Sad, Serbia

autor

Kovač P.

• University of Novi Sad, Faculty of Technical Sciences, Department for Production Engineering, Trg D. Obradovića 6, 21000 Novi Sad, Serbia

Bibliografia

• [1] ARMAREGO E. J., WANG J., DESHPANDE N. P., Computer-Aided predictive Cutting Model for Forces In Face Milling Allowing for Tooth Run-Out. Annals of the CIRP, Vol. 44, 1995,43-48.
• [2] SEKULIC M., Development of bases for cutting forces calculation, Master thesis. University of Novi Sad, 1998.
• [3] SEKULIC M., KOVAC P., The influence of machining conditions change on cutting forces in milling, PSU-UNS International Conference of Engineering and Environment ICEE-2007, Phuket-Thailand, 655-658.