PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Investigation of the Physical and Mechanical Properties of Fine Polyester/Viscose-Elastic Composite Rotor-Spun Yarn

Identyfikatory
Warianty tytułu
PL
Badanie właściwości fizycznych i mechanicznych kompozytowych przędz poliester/wiskoza/włókna elastomerowe przędzionych rotorowo
Języki publikacji
EN
Abstrakty
EN
The aim of this paper was to investigate the physical and mechanical properties of fine Polyester/Viscose-Elastic Composite Rotor-Spun Yarn. Yarn samples with different values of the draw ratio and twist factor as well as similar normal yarns all with a linear density of 20 tex were produced on a modified rotor spinning system. The results showed that in composite yarns, the breaking tenacity and elongation increased with an increase in the spandex draw ratio and decreased with an increase in the twist factor. The maximum amount of the elastic recovery ratio was obtained at a draw ratio of 3.75, while it increased with an increase in the twist factor. These yarns have a greater amount of breaking tenacity, elongation and elastic recovery ratio than normal rotor-spun yarns. Longitudinal SEM photos and also cross sectional views of the elastic composite rotor-spun yarn structure revealed that the elastic component preferentially occupied the outer layers of the yarn structure.
PL
Przygotowano próbki przędzy o masie liniowej 20 tex, rozciąganych przy różnych wartościach stopnia rozciągu i różnych skrętach. Próbki wyprzędziono na zmodyfikowanej przędzarce rotorowej. Stwierdzono, że w przędzach kompozytowych wytrzymałość na zerwanie i wydłużenie wzrastała ze wzrostem stopnia rozciągu włókien spandex i zmniejszała się ze wzrostem współczynnika skrętu. Maksymalna wartość stopnia odprężenia elastycznego uzyskano przy krotności rozciągu równej 3.75, a zwiększała się ona ze wzrostem współczynnika skrętu. Otrzymane przędze mają większa wytrzymałość na zerwanie, wydłużenie i stopień odprężenia elastycznego niż normalne przędze rotorowe. Zdjęcia SEM przekrojów wzdłużnych i poprzecznych przędzy wykazały, że składnik elastomerowy usytuowany jest głownie w zewnętrznych strefach przędzy.
Rocznik
Strony
28--32
Opis fizyczny
Bibliogr. 16 poz., rys., tab., wykr.
Twórcy
autor
  • Iran, Tehran, Amirkabir University of Technology, Department of Textile Engineering
autor
  • Iran, Tehran, Amirkabir University of Technology, Department of Textile Engineering
autor
  • Iran, Tehran, Amirkabir University of Technology, Department of Textile Engineering
Bibliografia
  • 1. Rupp J., Bohringer A.; Int. Textile Bull, Vol. 1, 1999, pp. 10-30. 2. Babaarslan O.; Text. Res. J., Vol. 71(4), 2001, pp. 367-371.
  • 3. Pinter Webpage; (http://www.pintersa. com),”Instruction Manual for Pinter Elastic Core Spun Yarn”, (accessed on July 2006).
  • 4. Babaarslan O., Tuzun Z.; Textile Asia, Dec. 2000, pp. 29-31.
  • 5. Su C.I., Maa M.C., Yang H.Y.; Text. Res. J., Vol. 74(7), 2004, pp. 607-610.
  • 6. Su C.I., Yang H.Y.; Text. Res. J., Vol. 74(12), 2004, pp. 1041-1044.
  • 7. Lou C. W., Chang C. W., Lin J. H., Lei C. H., Hsing W. H.; Text. Res. J., Vol. 75(5), 2005, pp. 395-401.
  • 8. Hassanbeigi A., Bagherzadeh R., Shaikhzadeh Najar S., Etrati S. M.; “Effect of Draw Ratio and Twist Factor of Elastic Core Yarn on Physical Properties of Cotton/Spandex Core-Spun Ring Yarns”, 85th Textile Institute World Conference- Sri Lanka, 2007.
  • 9. Kakvan A., Shaikhzadeh Najar S., Ghazi saidi R., Nami M.; The Journal of the Textile Institute, Vol. 98, No. 1, 2006, pp. 57-63.
  • 10. Dang M., Zhang Z., Wang S.; “Application of Elastane Yarn on Woolen Spinning Frames and Properties of Elastane Core-Spun Yarn”, Melliand International 3, 2006.
  • 11. Zhang H., Xue Y., Wang S.; “Spinning Conditions and Characteristics of Rotor Spun Composite Yarns with Spandex”, 8th Asian Textile Conference (ATC 8)-Tehran, 2005.
  • 12. Zhang H., Xue Y., Wang S.; Fibres and Polymers, Vol. 7, No. 1, 2006, pp. 66-69.
  • 13. Zhang H., Xue Y., Wang S., “Application of Elastane Fibres to Rotor Spinning”, Melliand International, 2/2007.
  • 14. Ortlek H. G.; FIBRES & TEXTILES in Eastern Europe, Vol. 14, No 3(57), 2006, pp. 42-47.
  • 15. Ortlek H. G., Ulku S.; Textile Research Journal, Vol. 77(6), 2007, pp. 432-436.
  • 16. Lin J. H., Chang C. W., Lou C. W., Hsing W. H.; Text. Res. J., 74(6), 2004, pp. 480-484.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-abacdf44-0d9f-4fd6-abc8-00f26ab3a363
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.