PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Experimental effectiveness studies of the technology for cleaning the inner cavity of gas gathering pipelines

Treść / Zawartość
Identyfikatory
Warianty tytułu
Języki publikacji
EN
Abstrakty
EN
Purpose: The purposes of the article are to determine the hydraulic efficiency of two gas gathering pipelines of the Yuliivskyi oil and gas condensate production facility (OGCPF) and develop a set of measures to increase it; to experimentally determine the efficiency of using foams to increase the hydraulic characteristics of the gas gathering pipelines in the Yuliivskyi OGCPF; to develop a set of measures that will help to improve the hydraulic characteristics of gas gathering pipelines. Design/methodology/approach: The research methodology consists in determining the hydraulic efficiency of gas gathering pipelines before and after cleaning their inner cavity with foams with different expansion ratios and comparing the obtained values, which allows to objectively assess the efficiency of this cleaning method. The studies were performed within the framework of research and development work by the specialists of the Ukrainian Scientific Research Institute of Natural Gases. Findings: The pilot testing was carried out to determine the efficiency of cleaning the inner cavity of gas gathering pipelines with foams with different expansion ratios. It showed positive results. It was determined that cleaning the inner cavity of gas gathering pipelines with foams with the expansion ratio from 80 to 90 led to an increase in the hydraulic efficiency coefficient by 10.5%, and with foams with the expansion ratio from 50 to 60 - by 5.7%. The measures taken to clean the inner cavity of gas gathering pipelines from liquid contaminations have proven their efficiency and can be recommended for other fields. Research limitations/implications: The obtained results show that it is reasonable to conduct the experimental studies on the efficiency of cleaning the inner cavity of gas gathering pipelines with the foams with higher expansion ratios. To achieve the maximum quality of cleaning the gas gathering pipelines, it is necessary to develop a new method that will combine the use of foam and gel piston. Practical implications: The performed experimental studies help to take a more reasonable approach to cleaning the inner cavity of gas gathering pipelines with foams and to predict in advance the effect of the foam expansion ratio on the hydraulic efficiency of gas gathering pipelines. Originality/value: The experimental studies on the effect of foam expansion ratios on the hydraulic efficiency of gas gathering pipelines are original.
Rocznik
Strony
61--77
Opis fizyczny
Bibliogr. 30 poz., rys., tab., wykr.
Twórcy
  • Branch Ukrainian Scientific Research Institute of Natural “Ukrgasvydobuvannya”, 20 Himnaziina Naberezhna str., Kharkiv, Ukraine Public Joint Stock Company
  • Department of Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
  • Department of Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
  • Branch Ukrainian Scientific Research Institute of Natural Gases Public Joint Stock Company “Ukrgasvydobuvannya”, 20 Himnaziina Naberezhna str., Kharkiv, Ukraine
  • Department of Oil and Gas Pipelines and Storage Facilities, Institute of Petroleum Engineering, Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
  • Department of Philology, Interpreting and Translation, Institute of Humanities and Public Administration, Ivano-Frankivsk National Technical University of Oil and Gas, 15 Karpatska str., Ivano-Frankivsk, Ukraine
Bibliografia
  • [1] V.B. Volovetskyi, O.Yu. Vytiaz, O.M. Shchyrba, V.I. Kotsaba, N.M. Kotsaba, Study of the hydraulic efficiency of gas gathering pipeline from the GGS of the Narizhnianske GCF to the CGTU-2 of the Yuliivske OGCF, Prospecting and Development of Oil and Gas Fields 3/44 (2012) 158-165 (in Ukrainian).
  • [2] V.B. Volovetskyi, O.M. Shchyrba, O.Yu. Vytiaz, Ya.V. Doroshenko, Analysis of the reasons for hydraulic efficiency decrease in gas gathering pipelines and the ways of its increase, Prospecting and Development of Oil and Gas Fields 3/48 (2013) 147-155 (in Ukrainian).
  • [3] V. Volovetskyi, O. Shchyrba, Investigation of the hydraulic efficiency of gathering gas pipelines, Bulletin of National Technical University "KhPI". Series: New Solutions in Modern Technologies 1 (2019) 3-13. DOI: https://doi.org/10.20998/2413-4295.2019.01.01
  • [4] Y. Doroshenko, J. Doroshenko, V. Zapukhliak, L. Poberezhny, P. Maruschak, Modeling computational fluid dynamics of multiphase flows in elbow and T-junction of the main gas pipeline, Transport 34/1 (2019) 19-29. DOI: https://doi.org/10.3846/transport.2019.7441
  • [5] Ya. Doroshenko, V. Zapukhliak, Ya. Grudz, L. Poberezhny, A. Hrytsanchuk, P. Popovych, O. Shevchuk, Numerical simulation of the stress state of an erosion-worn tee of the main gas pipeline, Archives of Materials Science and Engineering 101/2 (2020) 63-78. DOI: https://doi.org/10.5604/01.3001.0014.1192
  • [6] Ya. Doroshenko, I. Rybitskyi, Investigation of the influence of the gas pipeline tee geometry on hydraulic energy loss of gas pipeline systems, Eastern- European Journal of Enterprise Technologies 1/8(103) (2020) 28-34. DOI: https://doi.org/10.15587/1729-4061.2020.192828
  • [7] O. Tarayevs'kyy, Evaluation of circular welds strength capacity with corrosive defects, Metal Journal 3 (2013) 61-67.
  • [8] O. Tarayevs'kyy, Influence of main pipelines continuous exploitation on their physical and chemical properties, Metal Journal 3 (2013) 68-72.
  • [9] O. Taraevskyy, Key factors determining state of metal pipe during operation of main oil and gas pipeline, Metal Journal 7/2 (2015) 62-66.
  • [10] Ya.V. Doroshenko, A.P. Oliynyk, O.M. Karpash, Modeling of stress-strain state of piping systems with erosion and corrosion wear, Physics and Chemistry of Solid State 21/1 (2020) 151-156. DOI: https://doi.org/10.15330/pcss.21.1.151-156
  • [11] Ya. Doroshenko, V. Zapukhliak, K. Poliarush, R. Stasiuk, S. Bagriy, Development of trenchless technology of reconstruction of “Pulling pig P” pipeline communications, Eastern-European Journal of Enterprise Technologies 2/1(98) (2019) 28-38. DOI: https://doi.org/10.15587/1729-4061.2019.164351
  • [12] V. Zapukhliak, L. Poberezhny, P. Maruschak, V. Grudz Jr., R. Stasiuk, J. Brezinová, A. Guzanová, Mathematical modeling of unsteady gas transmission system operating conditions under insufficient loading, Energies 12/7 (2019) 13-25. DOI: https://doi.org/10.3390/en12071325
  • [13] M. Serediuk, S. Grygorsky, The laws of pressure change in pipelines during cessations of pumping units, Oil Industry 2 (2015) 100-104. (in Russian).
  • [14] M. Serediuk, S. Grygorsky, Experimental study of transient processes in oil pipeline caused by startups of pumping units, Eastern-European Journal of Enterprise Technologies 5/2(83) (2016) 30-37. DOI: https://doi.org/10.15587/1729-4061.2016.77190
  • [15] P. Maruschak, L. Poberezny, O. Prentkovskis, R. Bishchak, A. Sorochak, D. Baran, Physical and mechanical aspects of corrosion damage of distribution gas pipelines after long-term operation, Journal of Failure Analysis and Prevention 18/3 (2018) 562-567. DOI: https://doi.org/10.1007/s11668-018-0439-z
  • [16] A.V. Yavorskyi, M.O. Karpash, L.Y. Zhovtulia, L.Y. Poberezhny, P.O. Maruschak, Safe operation of engineering structures in the oil and gas industry, Journal of Natural Gas Science and Engineering 46 (2017) 289-295. DOI: https://doi.org/10.1016/j.jngse.2017.07.026
  • [17] D. Dall’Acqua, M. Benucci, F. Corvaro, M. Leporini, R. Cocci Grifoni, A. Del Monaco, A. Di Lullo, C. Passucci, B. Marchetti, Experimental results of pipeline dewatering through surfactant injection, Journal of Petroleum Science and Engineering 159 (2017) 542-552. DOI: https://doi.org/10.1016/j.petrol.2017.08.068
  • [18] E. Tuna, Foam characterization effects of bubble size and texture, MSc. Thesis, Middle East Technical University, 2004. [19] G.D. Xia, L. Chai, Influence of surfactant on two phase flow regime and pressure drop in upward inclined pipes, Journal of Hydrodynamics 24/1 (2012) 39-49. DOI: https://doi.org/10.1016/S1001-6058(11)60217-5
  • [20] T. Duangprasert, A. Sirivat, K. Siemanond, J.O. Wilkes, Vertical two-phase flow regimes and pressure gradient under the influence of SDS surfactant, Experimental Thermal and Fluid Science 32/3 (2008) 808-817. DOI: https://doi.org/10.1016/j.expthermflusci.2007.10.005
  • [21] V.V. Diachuk, V.K. Tikhomirov, V.N. Goncharov, I.I. Kaptsov, Cleaning gas pipelines with foam, Papirus, Odessa, Ukraine, 2002, (in Ukrainian).
  • [22] V.V. Diachuk, V.M. Honcharov, S.V. Chopan, R.V. Boiko, O.I. Honcharov, L.O. Kostenko, Foamer for cleaning and inhibition of the internal surface of gas equipment and results of its industrial tests, Issues of Gas Industry Development in Ukraine ХХХІ (2003) 199-205 (in Ukrainian).
  • [23] I.I. Kaptsov, Cleaning gas pipelines with surfactants, The Municipal Economy of Cities 112 (2014) 107-111 (in Ukrainian).
  • [24] A. Redko, I. Kaptsov, Foamer of high-expansion foam for cleaning gas pipelines under pressure, Motrol. Commission of Motorization and Energetics in Agriculture 16/6 (2014) 101-108 (in Polish).
  • [25] V.B. Volovetskyi, A.V. Uhrynovskyi, Ya.V. Doroshenko, O.M. Shchyrba, Yu.S. Stakhmych, Developing a set of measures to provide maximum hydraulic efficiency of gas gathering pipelines, Journal of Achievements in Materials and Manufacturing Engineering 101/1 (2020) 27-41. DOI: https://doi.org/10.5604/01.3001.0014.4088
  • [26] V.B. Volovetskyi, M.V. Frait, O.M. Shchyrba, O.Yu. Vytiaz, Intensification of hydrocarbon production under the conditions of pressure decline in the deposits of the Visean and Serpukhovian horizons of the Yuliivske OGCF, Scientific Bulletin of Ivano-Frankivsk National Technical University of Oil and Gas 2/24 (2010) 34-40 (in Ukrainian).
  • [27] V.B. Volovetskyi, O.M. Shchyrba, O.Yu. Vytiaz, V.V. Velychko, V.I. Kotsaba, S.V. Vasylenko, Peculiarities of hydrocarbons production in the Yuliivske OGCF, Scientific Bulletin of Ivano-Frankivsk National Technical University of Oil and Gas 1/42 (2017) 33-45 (in Ukrainian).
  • [28] V.B. Volovetskyi, O.Yu. Vytiaz, V.I. Kotsaba, O.M. Shchyrba, Methods of cleaning the flowlines of gas and gas condensate wells, Oil and Gas Power Engineering 2/24 (2015) 32-43 (in Ukrainian).
  • [29] O.H. Semeniaka, S.I. Kushnariov, V.I. Kotsaba, S.V. Kryvulia, V.O. Rosliakov, Yu.L. Fesenko, A.P. Vakhriv, S.М. Klymenko, D.M. Kohuch, O.O. Misiniov, Foam well development device, Assignee: PJSC “Ukrgasvydobuvannya”. Patent of Ukraine No. 104950, IPC: Е21В43/00. Application date: 15.09.2015; Published: 02.25.2016; Bulletin No. 4 (in Ukrainian).
  • [30] V.B. Volovetskyi, O.M. Shchyrba, V.L. Otrishko, Method of for foam destruction in the gas-liquid flow, Assignee: PJSC “Ukrgasvydobuvannya”. Patent of Ukraine No. 146266, IPC: В01D 19/02, В01D 19/04. Application date: 14.09.2020; Published: 03.02.2021; Bulletin No. 5 (in Ukrainian).
Uwagi
PL
Opracowanie rekordu ze środków MNiSW, umowa Nr 461252 w ramach programu "Społeczna odpowiedzialność nauki" - moduł: Popularyzacja nauki i promocja sportu (2021).
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ab3bd6af-04e4-441e-82d9-898c20f67769
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.