PL EN


Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Tytuł artykułu

Wymiarowanie płyt żelbetowych i fundamentów na przebicie według europejskich aprobat technicznych

Autorzy
Identyfikatory
Warianty tytułu
EN
Dimensioning of reinforced concrete slabs and foundations for punching according to European Technical Approvals
Języki publikacji
PL
Abstrakty
PL
Przedstawiono zasady wymiarowania na przebicie zbrojenia w postaci trzpieni dwugłówkowych według Europejskich Aprobat Technicznych (ETA), obowiązujących we wszystkich krajach Unii Europejskiej. Porównano zasady obliczeniowe według procedur ETA z zasadami Eurokodu 2. Wykazano, że wyniki tych obliczeń mogą się różnić zasadniczo. Procedury ETA prowadzą zwykle do większych ilości zbrojenia na przebicie w strefach przysłupowych niż wynikałoby to z obliczeń normowych.
EN
The article presents the principles of dimensioning punching reinforcement in the form of double headed studs according to European Technical Approvals (ETA). By law, the approval documents are obligatory in all countries of the European Union. The article compares the calculation rules according to the ETA procedures with the principles of Eurocode 2. It has been shown that the results of these calculations can vary substantially. ETA procedures usually lead to larger amounts of punching reinforcement at column zones than it would follow from the calculation of code.
Rocznik
Strony
196--202
Opis fizyczny
Bibliogr. 9 poz., il.
Twórcy
autor
  • Politechnika Łódzka
Bibliografia
  • [1] PN-EN 1992-1-1:2008/NA: 2010. Eurokod 2 - Projektowanie konstrukcji z betonu. Część 1-1: Reguły ogólne i reguły dla budynków.
  • [2] ACI 318-08, Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute. Farmington Hills. Mich., 2010.
  • [3] ETA-12/0454: HALFEN HDB shear rail: Double-headed studs as punching reinforcement. Berlin: Deutsches Institut für Bautechnik, December 2012.
  • [4] ETA-13/0076: Punching reinforcement Schöck Bole: Double-headed studs as punching reinforcement for flat slabs and footings. Berlin: Deutsches Institut für Bautechnik, March 2013.
  • [5] ETA-13/0136: JORDAHL punching reinforcement JDA: Double-headed studs as punching reinforcement for flat slabs and footings. Berlin: Deutsches Institut für Bautechnik, March 2013.
  • [6] ETA-13/0151: PEIKKO PSB punching reinforcement: Double-headed studs as punching reinforcement. Berlin: Deutsches Institut für Bautechnik, March 2013.
  • [7] PN-B-03264:2002 Konstrukcje betonowe, żelbetowe i sprężone - Obliczenia statyczne i projektowanie.
  • [8] Urban T.: Komentarz do zasad obliczania fundamentów na przebicie według PN-EN 1992-1-1:2008/NA:2010. „Inżynieria i budownictwo”, nr 3/2011.
  • [9] Knauff M., Golubińska A., Knyziak P.: Tablice i wzory do projektowania konstrukcji żelbetowych z przykładami obliczeń. Wydawnictwo Naukowe PWN, Warszawa 2013.
Typ dokumentu
Bibliografia
Identyfikator YADDA
bwmeta1.element.baztech-ab26a548-f97f-4ba6-8469-d077f524411b
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.